Tel: +86-371-86151827

carbon steel sheet cutter steels

Steel grade:carbon steel sheet cutter steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

carbon steel sheet cutter steels Introduction

A closer look at low-carbon sheet steels - The FABRICATOR

thefabricator› Article› Metals/MaterialsSimply put, steel is just iron plus no more than about 2.1 percent carbon. (If the steel has more than 2.1 percent carbon, it’s called cast iron.) With low-carbon steels, the carbon level tops out at around 0.1 percent to 0.2 percent. There is not much else in steel, but what is …

Carbon Steel | Cherokee Steel

Carbon Steel; Brass; Pipe – Valves – Fittings; Processing. WaterJet Cutting; Aluminum Plate Saw Cutting; Computer Controlled Band Saw Cutting; Waterjet Parts Gallery; Contact Us; Menu; CARBON STEEL. Carbon and Alloy Steels in Plate, Sheet, Bar & Shapes. Plate. A-36

Metallurgy Matters: Carbon content, steel classifications ...

thefabricator› Article› Metals/MaterialsPlain Carbon Steels

Carbon steel sheet cutting and flattening from coils and ...

Carbon steel sheet cutting and flattening from coils and plates of special steels. Sidastico: Since 1980 we have operated as a steel service center, a leader in carbon steel coils sheets and special steels, with custom processing based on your specific requirements. For over 35 years we have been helping companies grow, with competence and ...[PDF]

Carbon Steel Handbook - Metabunk

Carbon steels in which carbon represents 0.15–0.35%—those used most often as boiler and piping materials—are the focus of this Carbon Steel Handbook. Although carbon steel is available in virtually all product forms, it is the pressure-containing applications that are of primary interest in this report:

Tool Steel - Loftis Steel & Aluminum, Inc.

About Tool Steels. Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness).

Carbon Steel Plates and Sheets Delivery - Avion Alloys

High-carbon steels contain 0.60 to 1.00 percent carbon. The usage of carbon steel sheets can be for strong wiring, spring material, and cutting. Ultrahigh-carbon steels are experimental alloys that contain 1.25 to 2.0 percent carbon. Carbon steel sheets are commonly seen being used in knives. As a carbon steel distributor, our inventory is ...

Carbon Steel Sheet Metal | Steel Sheets for Sale - MetalsCut4U

Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.

Carbon Steel: Properties, Production, Examples And ...

Carbon steel is an iron-carbon alloy, which contains up to 2.1 wt.% carbon. For carbon steels, there is no minimum specified content of other alloying elements, however, they often contain manganese. The maximum manganese, silicon and copper content should …

The Four Types of Steel | Metal Supermarkets

Medium Carbon Steel: Typically has a carbon range of 0.31% to 0.60%, and a manganese content ranging from .060% to 1.65%. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment. High Carbon Steel: Commonly known as “carbon ...

Carbon Steel Sheet Metal | Steel Sheets for Sale - …

Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.

Carbon Steel Plates and Sheets Delivery - Avion Alloys

High-carbon steels contain 0.60 to 1.00 percent carbon. The usage of carbon steel sheets can be for strong wiring, spring material, and cutting. Ultrahigh-carbon steels are experimental alloys that contain 1.25 to 2.0 percent carbon. Carbon steel sheets are commonly seen being used in knives. As a carbon steel distributor, our inventory is ...

carbon steel iron sheet cutter - pond-pro

shearing machine for carbon steel sheet. Carbon steel plate shearing machine, cnc carbon steel sheet cutter, hydraulic carbon steel sheet shearer is widely used in construction of bridges, riveted, bolted, and other structural elements included drilling machine, power shovel, electricity drive wheel counter-mine trolley, mineral product ...[PDF]

Carbon and Alloy Steels - gerdau

Carbon and Alloy Steels Safety Data Sheet 761 according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations ... Exposure to massive forms of steel presents no health hazards. Grinding, thermal cutting, or melting may produce dust or fumes. Dust or fumes may contain elemental constituents.

Special Steels - Carbon Steel, Alloy Steel, Free Cutting ...

Special Steels - Carbon Steel, Alloy Steel, Free Cutting, etc Steels are alloys of iron and other elements, primarily carbon, widely used in construction and other applications because of their high tensile strengths and low costs.

Amazon: sheet metal cutter - Cobalt Steel

Search results. 1-16 of 166 results for Cobalt Steel: "sheet metal cutter" Cobalt Steel: "sheet metal cutter"

High Carbon Blade Steels - Knife Steel - Mosaic Pins

An excellent forging steel for beginning and professional knifemakers. Forgiving to heat treating variances this steel is great for forging a hi carbon knife or making damascus by layering it with a contrast metal such as 15N20.

What Is Tool Steel ? (Six Groups With Details) - Otai ...

What is tool steel? Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion and deformation and their ability to hold a cutting edge at elevated temperatures.

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

3 Ways to Cut Steel - wikiHow

Aug 29, 2018· How to Cut Steel. Steel comes in many different forms and thicknesses. Steel thickness is referred to as "gauge." The smaller the number of gauge, the thicker the steel. Thin-gauge steel, like sheet metal, can be cut with a large variety...Views: 199K

Carbon Steel Product - Carbon Steel Sheet Manufacturer ...

Manufacturer of Carbon Steel Product - Carbon Steel Sheet, CS IS 2062 Sheet, CS API 5L Seamless Pipe and CS ASTM 106 ERW Pipe offered by Amanat Steels Private Limited, Mumbai, Maharashtra.

The Difference Between Carbon and Stainless Steel | Metal ...

Selecting an appropriate type of steel for a project is one of the most important decisions to make. However, before deciding between individual grades, you first have to decide what type of steel to use, such as carbon steel or stainless steel.To help, this article will discuss the difference between carbon and stainless steel.

Blade Steels - Axe & Knife

For instance, a piece of steel marked as AISI 1045 means that it has .45% carbon content and 1070 has .70% carbon content. Steel that has a carbon content ranging between .05% and .15% is considered Low Carbon Steel while .16% to .29% is deemed to be Mild Carbon Steel. Neither are suitable for making a functional blade.

The effects of steel composition on the laser cut edge ...

The effects of steel composition on the laser cut edge quality of carbon and C-Mn steels. ... Since then, approximately 20,000 commercial laser sheet metal cutting systems have been installed worldwide. At present, steel up to 12mm in thickness is routinely cut on a commercial basis, for applications in shipbuilding, structural steel work, off ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.