Tel: +86-371-86151827

mirror polished ss430 stainless steel sheet

Steel grade:mirror polished ss430 stainless steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

mirror polished ss430 stainless steel sheet Introduction

304 Stainless Steel Sheet #8 Mirror | Stainless Supply

304 stainless steel sheet #8 mirror has a non-directional finish that virtually looks like a mirror. 304 stainless steel sheet #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. 304 stainless steel sheet #8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.

430 Stainless Steel Sheet #8 Mirror | Stainless Supply

430 stainless steel sheet #8 mirror has a non-directional finish that virtually looks like a mirror. Although the 430 stainless steel #8 retains the same designation as the 304 stainless steel #8, the mirror quality may be slightly less than the 304 #8 mirror quality. 430 stainless steel sheet #8 mirror does not contain or have a coating or finishing material to give it reflectivity.

Stainless Steel sheet Products - Polished Sheet | Penn ...

Stainless Steel Polished Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet in a variety of finishes, including 2D, 2B, #4 Brush, and #8 Mirror finish. We also can supply specialty finishes per your exact requirements.

Stainless Steel Sheets, Stainless Steel Finishes, Mirror ...

304 Stainless Steel. 304 stainless steel is the most widely used commercial grade of stainless steel. 304 stainless steel sheet metal is a versatile, anti-rusting, heat resistant steel for general uses with food equipment, plumbing materials, kitchen sinks, and back splashes.

Polished Stainless Steel Sheets Suppliers in India, Brush ...

steelplates.in› Steel SheetsWe can supply polished stainless steel sheets with close tolerances and most reasonable prices in the industry. Metline has emerged as a one stop solution for all your ss sheets requirements. We are one of the largest exporters & distributors of SS 304 sheets, SS 430 sheets, SS 441 sheets, SS 439 sheets and SS 316L sheets.

Stainless Steel Mirror Sheet, Stainless Steel Mirror Sheet ...

Alibaba offers 35,966 stainless steel mirror sheet products. About 71% of these are stainless steel sheets, 1% are plastic sheets, and 1% are mirrors. A wide variety of stainless steel mirror sheet options are available to you, such as jis, aisi, and astm.

Stainless Steel Sheets, Stainless Steel Finishes, Mirror ...

304 Stainless Steel. 304 stainless steel is the most widely used commercial grade of stainless steel. 304 stainless steel sheet metal is a versatile, anti-rusting, heat resistant steel for general uses with food equipment, plumbing materials, kitchen sinks, and back splashes.

Best Polished Stainless Steel Plate Stainless Steel Mirror ...

We Specialized in polished stainless steel plate, stainless steel sheet metal cost, Check it! ... Home > PRODUCT > DECORATIVE SHEET > Stainless steel mirror plate > Mirrored coffee gold stainless steel mirror sheet . Mirrored coffee gold stainless steel mirror sheet ... SS430. SS201. SS304. SS316. Elong(10%) Above 22. 50-60. Above 40. 30MIN ...

Mirror Finish Stainless Steel Sheet - Mirror Finish SS ...

Find here Mirror Finish Stainless Steel Sheet, Mirror Finish SS Sheet manufacturers, suppliers & exporters in India. Get contact details & address of companies manufacturing and supplying Mirror Finish Stainless Steel Sheet, Mirror Finish SS Sheet across India.

STAINLESS STEEL SHEET METALS - Quick Ship Metals

Home > Stainless Steel Sheet Metals > No. 8 Mirror Finish Stainless Sheet STAINLESS STEEL SHEET METALS 22 GAUGE #8 MIRROR FINISH .030" …

316 mirror polished 6mm stainless steel sheet plate

316L Stainless Steel Sheet #8 Mirror - Stainless Supply. 316L stainless steel sheet #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. Steel Plates Suppliers, Stainless Steel Sheet/Plates, Coils

Amazon: stainless steel mirror

HOMI CHEF Mirror Polished NICKEL FREE Stainless Steel 6 QT(Quart) Stock Pot/Soup Pot with Glass Lid (No Toxic Non Stick Coating, Whole-Clad 3-Ply) - Cookware Pots And Pans Sets 10121. by Homichef. 5.0 out of 5 stars 5. $49.99 $ 49. 99. Get it as soon as …

China Ss 430 Stainless Steel Sheet Mirror Finish - China ...

Ss 430 Stainless Steel Sheet Mirror Finish 1) Types 430 stainless steels provide useful resistance to corrosion on a wide range of moderately oxidizing to moderately reducing environments. The alloys are used widely in equipment and utensils for processing and handling of food, beverages and dairy products.

430 Stainless Steel Sheet Suppliers | ASTM A240 Type 430 ...

Stockist, distributor of ASTM A240 Type 430, SS 430 Sheet, 430 Stainless Steel Sheet Suppliers, Polished Stainless Steel 430 Sheet, SS 430 Sheet Price Per kg in India, SS 430 perforated sheet, SS 430 Strips, SS 430 Coil, SS 430 Shim Sheet, SS 430 Perforated Sheet, SS 430 material suppliers

Buy Ss 430 Mirror Finished - w3s.in

Buy Mirror Finish 430 shanghai-BBN STEEL sale steel. Stainless Steel 430 Coils, Sheet Suppliers, Buy 430 - Steel Plates Feb 13, 2016 Suppliers of Stainless Steel 430 Coils, Sheets and Plates in India - SS 430 Trade Assurance 316l decorative mirror finish stainless steel sheet price per kg ss AISI 201 304 316 409 430 310 Super Mirror Stainless Steel Sheet / …

Mirror Polished 409 Stainless Steel Plate, Mirror Polished ...

Alibaba offers 315 mirror polished 409 stainless steel plate products. About 64% of these are stainless steel sheets. A wide variety of mirror polished 409 stainless steel plate options are available to you, such as astm, jis, and aisi.

Amazon: 430 stainless steel sheet

Amazon: 430 stainless steel sheet. From The Community. Try Prime All ... Our stainless steel baking sheet has superior mirror ... TeamFar Baking Sheet, Stainless Steel Baking Pan Cookie Sheet, Healthy & Non Toxic, Rust Free & Less Stick, Easy Clean & Dishwasher Safe. by TeamFar.

mirror ss steel sheet 430 - alibaba

Alibaba offers 1,489 mirror ss steel sheet 430 products. About 95% of these are stainless steel sheets, 3% are steel sheets, and 1% are steel strips. A wide variety of mirror ss steel sheet 430 options are available to you, such as astm, aisi, and din.

0.5 mm mirror finish ss sheet sus304 grade

Ss 304 /201 Hairline Finish 1220mm X 2440mm Stainless Steel Sheet. Thickness: 0.5mm,0.6mm,0.8mm,1.0mm,1.2mm 4. China Stainless Steel Sheet SUS304 Gold Color Mirror Finish Decoration Steel Sheet 4X8 Size · Foshan. China Hot Sale Stainless Steel Bronze Color Finish Mirror or

Stainless Steel Sheet: Metalworking Supplies | eBay

Find great deals on eBay for Stainless Steel Sheet in Metalworking Supplies. Shop with confidence. Skip to main content. ... Mirror Polished Stainless Steel Sheets. Stainless Steel Sheet 300. ... SS430 is a magnetic stainless steel grade. SS430 SHEET. We operate out of …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.