Tel: +86-371-86151827

hot dip d steel sheet to

Steel grade:hot dip d steel sheet to

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot dip d steel sheet to Introduction

hot dip steel sheet metal - hopkinsplasticsurgery

Continuously Hot-Dip Coated Steel Strip and Sheet · PDF The lay-out of a hot-dip coating line is shown in Fig. 1. Normally the flat steel strip is cleaned, re-crystallised or heated up in an annealing furnace and cooled down to the temperature of the molten metal in the coating pot.

Hot-dip galvanization - Wikipedia

Hot-dip galvanization. It is the process of coating iron and steel with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C). When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen ( O2) to form zinc oxide ( …

Hot Dipped Galvanized Steel Coil Sheet Supplier China ...

Galvanized Sheet is carbon steel sheet coated with zinc on two sides by a continuous hot-dip process. This method tightly adheres the coating to the steel with an iron-zinc alloy bonding layer formed by a diffusion process while the heated steel strip is in contact with the molten zinc.User rating: 4.5/5

Hot Dipped Galvanized Steel Sheet & Coil | Alliance Steel

alliancesteel.net› Products› Coated SteelHot dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment. The finish is applied by passing the steel through a molten bath of zinc at a high temperature. Alliance Steel’s hot dipped galvanized steel service capabilities include slitting, shearing, blanking ...

Galvanized Vs. Cold Rolled Steel | Hunker

Galvanizing. Hot-dip galvanized (HDG) steel is often just called galvanized steel, although the full name is more correct. HDG steel products are prepared by plunging a steel product into a vat of molten zinc. A thin coat of zinc adheres to the steel part and is quickly oxidized by the surrounding atmosphere.[PDF]

Hot-dip aluminum-coated steel sheets

The coating mass on our ALSHEET products is controlled using the wiping method, resulting in an even surface with a beautiful finish. The external appearance of ALSHEET at high temperature is much better than hot-dip galvanized steel sheet and cold-rolled steel …

Galvanized Steel | Cascadia Metals

Galvanized Steel. Galvanized Steel is created through the hot-dip galvanizing process whereby carbon steel coil is submerged in a bath of molten zinc. The steel coil emerges with a metallic coating of zinc on both sides of the strip. Galvanizing protects the carbon steel in …

Galvanized Iron And Steel: Characteristics, Uses And ...

Both of these methods employed a "hot dipping" process to coat sheet iron with zinc. Like tinplate, early galvanized metals were hand dipped. Today almost all galvanized iron and steel is electroplated. The following are the most common methods for applying protective coatings of zinc to iron and steel: Hot-dip …

A653 - Galvanized Steel Sheet - Online Metal Store

A653 Galvanized Steel Sheets offer excellent corrosion resistance due to its galvanized coating and zinc contents. Because of its high corrosion resistance, A653 is frequently found in outdoor hardware such as outdoor signage, garbage cans, heating and cooling systems, and electrical protection.

Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel ...

Manufacturer of Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel Coil, Galvalume Steel Coils, Galvanized Steel Strips and Galvanized Strip offered by J. K. Steel Strips LLP, Mumbai, Maharashtra.

Our hot-dip galvanized steel sheet business supporting ...

Sumitomo Corporation’s hot-dip galvanized steel sheet business began in 1993, when we established Eastern Steel Industry Corporation (ESIC) in Cambodia. In April 2002, we took over the steel trading arm of Nomura Trading, thereby succeeding to a galvanized steel sheet business dating back to the 1960s.[PDF]

Continuously Hot-Dip Coated Steel Strip and Sheet

processors of cont inuous hot-dip coated sheet metal shoul d know. This document provides informa-tion to users and processors of hot-dip coated strip and sheet about the curre nt state of availability. It is a compilation of the characteristic properties for hot-dip coated strip and sheet metal and should help to prevent misundersta ndings ...[PDF]

Galvanized (Hot Dipped) Sheet – Carbon Steel

Galvanized (Hot Dipped) Sheet – Carbon Steel 11 . Eyes : May cause eye irritation. Particles of iron or iron compounds, which become imbedded in the eye, may cause rust stains unless removed fairly promptly. Skin : May cause skin irritation upon contact. May cause sensitization by skin contact.[PDF]

Hot-dip aluminum-coated steel sheets

Hot-dip aluminum-coated steel sheets. 1 ... The external appearance of ALSHEET at high temperature is much better than hot-dip galvanized steel sheet and cold-rolled steel sheet, and the surface does not discolor up to 300~350°C. At higher temperature, the surface forms an Al-Fe alloy, of a different color, but this prevents the ...

Hot Dipped Galvanized – Rolled Steel Products « Rolled ...

Hot Dipped Galvanized – sheet or strip steel bathed in a molten solution containing not less than 98% pure zinc to uniformly coat for corrosion resistance. The coating is not intended to withstand outdoor exposure without chemical treatment or painting. Sheets are produced as commercial quality, drawing quality, drawing quality special killed, structural, physical quality, and are available ...[PDF]

Study of the Mechanical Properties of N. Coni the Hot …

Hot-dip-zinc-coated steel sheet, also called galvanized sheet, is by far the most widely used coated sheet product. For general applications, the galvanized sheets have 19 µm of zinc thickness per side. This corresponds to a two-side coating mass of 275 g/m2.Published in: Journal of The Brazilian Society of Mechanical Sciences and Engineering · 2009Authors: N Coni · M L Gipiela · Ana Sofia C M Doliveira · Paulo Victor Prestes MarcondesAffiliation: Federal University of Parana[PDF]

Hot-Dip GalvanizeD CoatinG appearanCe

It is possible for hot-dip galvanized structural steel coatings to also have a spangled appearance, but it is not nearly as common as in sheet metal coatings. The occurrence of spangle on hot-dip galvanized coatings is the result of minor bath additions enhancing the appearance of …

Hot-Dip Galvanizing to ASTM A123 Fact Sheet

Hot-Dip Galvanizing to ASTM A123 Fact Sheet Hot-dip galvanizing (HDG) is the process of dipping fabricated steel into a kettle or vat containing molten zinc. While the steel is in the kettle, the iron in the steel metallurgically reacts with the molten zinc to form a tightly-bonded alloy coating that provides superior corrosion protection to steel.

Galvanized Steel - Metals Depot

Galvanized Steel. Galvanized steel is the process of coating regular hot rolled steel with a zinc layer bydipping the shapes in a hot bath of pure zinc at nearly 860 degrees F. Once withdrawn from the tank the steel has metallurgical bond providing a tough and durable weather resistance layer of zinc carbonate which provides protection...[PDF]

Product Type & Applicable Specifications Description …

Description Hot-Dip Galvanized (HDG) Flat Steel (Coil/Strip/Sheet) Product Size & Form in Hot-Dip Galvanized Material 0.28 - 4.00 0.28 - 4.00 0.30 - 4.00 0.30 - 4.00 900 - 1500 650 - 1500 30 650 - 1500 Coil form / Sheet Coil form / Sheet Coil form / Sheet Coil form / Sheet Mill Edge Trimmed Edge Slitted Coil Trimmed Edge

dx51d z100 hot dip galvanized steel coil for roofing sheet ...

Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for dx51d z100 hot dip galvanized steel coil for roofing sheet, The product will supply to all over the world, such as: Cancun , Ukraine , Chile , Our company's main items are widely used all over ...[PDF]

Zinc Coatings - Court Galvanizing Inc

hot-dip lines in North America, each of which could apply at least one of the seven coatings listed above. Electrogalvanizing. Electrogalvanized coatings are applied to steel sheet and strip by electrodeposition. Electrogalvanizing is a continuous operation where the steel sheet or strip is fed through suitable entry

hot dipped galvanized sheet steel - alibaba

Alibaba offers 63,332 hot dipped galvanized sheet steel products. About 46% of these are steel sheets, 11% are metal building materials, and 1% are steel pipes. A wide variety of hot dipped galvanized sheet steel options are available to you, such as aisi, astm.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.