Tel: +86-371-86151827

a15b glue type stainless steel plate heat exchanger

Steel grade:a15b glue type stainless steel plate heat exchanger

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a15b glue type stainless steel plate heat exchanger Introduction

Heat Exchanger and Plates | Products | Rigil Marine

A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates.Connection Types: Range of industrial and hygienic connections

PHE Plates and Gaskets | Moody Heat Exchangers

304 & 316 Stainless Steel Titanium / Hastelloy Hastelloy C-276, C-22, B&C-2000 Avesta 254 SMO Nickel Monel Incoloy 825 Uranus B-6 Tantalum. To place an order or to request more information, please contact us.. We offer a next day delivery service in the UK on all plates and gaskets in stock, and within agreed times worldwide, and we offer 24 hours, 7 days a week access to our plates, gaskets ...

Heat Exchanger - Alfa Laval Gasketed Plate Heat Exchanger ...

A plate heat exchanger is a specific type of heat exchanger which consists of a number of thin, corrugated plates. These plates are pressed against each other in a frame, in which the edges of the plates are provided with a rubber gasket or welded together depending on the application of the heat exchanger.[PDF]

HISAKA Web-Simulator (HWS) Plate Heat Exchanger

HISAKA Web-Simulator (HWS) Plate Heat Exchanger This is the ˜rst plate heat exchanger design website opened on the Internet in the world. Access the URL below and click on the Web-Simulator icon. You can simulate the plate heat exchanger perfect for your needs, any time of the day, from anywhere.

Plate Heat Exchanger – Deltech Marine

deltechmarine› ProductsPlate Heat Exchanger. They are composed of a number of thin metal plates compressed together into a ‘plate pack’ by two pressure plates. Within a plate heat exchanger, the fluid paths alternate between plates allowing the two fluids to interact, but not mix, several times in a small area. Each plate is corrugated to increase the surface area and maximize heat transfer.

Heat Exchanger - Alfa Laval Plate Heat Exchanger Spares ...

Service Provider of Heat Exchanger - Alfa Laval Plate Heat Exchanger Spares, Sondex Plate Heat Exchanger, Alfa Laval M10 Heat Exchanger & Its Spares and Alfa Laval Am20 Bfm offered by YA Marine, Bhavnagar, Gujarat.

Equal with GEA Marine diesel boat engine heat exchanger ...

Equal with GEA Marine diesel boat engine heat exchanger, US $ 3 - 200 / Piece, Heat Exchanger, New, Beijing, China (Mainland).Source from Hofmann (Beijing) Engineering Technology Co., Ltd. on …

Gasket Glue For Heat Exchangers, Gasket Glue For Heat ...

Alibaba offers 699 gasket glue for heat exchangers products. About 49% of these are refrigeration & heat exchange parts, 37% are gaskets, and 1% are heat exchanger. A wide variety of gasket glue for heat exchangers options are available to you, such as free samples.

Plate Heat Exchanger – Deltech Marine

deltechmarine› ProductsPlate Heat Exchanger. They are composed of a number of thin metal plates compressed together into a ‘plate pack’ by two pressure plates. Within a plate heat exchanger, the fluid paths alternate between plates allowing the two fluids to interact, but not mix, several times in a small area. Each plate is corrugated to increase the surface area and maximize heat transfer.[PDF]

HISAKA Web-Simulator (HWS) Plate Heat Exchanger

HISAKA Web-Simulator (HWS) Plate Heat Exchanger This is the ˜rst plate heat exchanger design website opened on the Internet in the world. Access the URL below and click on the Web-Simulator icon. You can simulate the plate heat exchanger perfect for your needs, any time of the day, from anywhere.

Heat Exchanger - Alfa Laval Plate Heat Exchanger Spares ...

Service Provider of Heat Exchanger - Alfa Laval Plate Heat Exchanger Spares, Sondex Plate Heat Exchanger, Alfa Laval M10 Heat Exchanger & Its Spares and Alfa Laval Am20 Bfm offered by YA Marine, Bhavnagar, Gujarat.

China Thermowave TL50PP Plate Heat Exchanger Plate and ...

China Thermowave TL50PP Plate Heat Exchanger Plate and Gasket, Find details about China Heat Exchanger, Boiler Parts from Thermowave TL50PP Plate Heat Exchanger Plate and Gasket - Tianjin Dingda Mold Co., Ltd

Heat Exchanger Flat Plate - Alfa Lava - Stainless - New | eBay

ebay› …› HVAC› HVAC Parts› Heat ExchangersHeat Exchangers Email to friends Share on Facebook - opens in a new window or tab Share on Twitter - opens in a new window or tab Share on Pinterest - opens in a new window or tab Add to watch listSeller Rating: 100.0% positive

Stainless Steel/Ti Plates for Gasket Heat Exchanger (can ...

China Stainless Steel/Ti Plates for Gasket Heat Exchanger (can replace M15B/M15M), Find details about China Gasket Heat Exchanger, Heat Exchanger from Stainless Steel/Ti Plates for Gasket Heat Exchanger (can replace M15B/M15M) - Jiangyin 6Z Heat Exchanger Manufacturing Co., Ltd.

Plate Heat Exchanger | Products | Y.A. Marine - Dealers in ...

Typically a plate heat exchanger requires 20-40% less space than required by a shell & tube heat exchanger. Close Approach Temperature The same features that give the plate heat exchanger its high efficiency also makes it possible to reach close approach temperatures which is particularly important in heat recovery and regeneration applications.

Gaskets by Manufacturer | Titanium Marine Heat Exchangers

ALFA LAVAL: APV: Model: Fixing Method: Model: Fixing Method: Model: Fixing Method: Model: Fixing Method: M3: Clip on: A10B: Stick/Glued: SR2: Paraclip: TR9 AL ...

Equal with GEA Marine diesel boat engine heat exchanger ...

Equal with GEA Marine diesel boat engine heat exchanger, US $ 3 - 200 / Piece, Heat Exchanger, New, Beijing, China (Mainland).Source from Hofmann (Beijing) Engineering Technology Co., Ltd. on …

HeatExchangerSpares - Thermowave

HRS Group companies are specialist in heat transfer technology; design and manufacture corrugated tube, scraped surface and plate heat exchangers, piston pumps, process systems and aseptic fillers for industrial processes of different sectors.

Alfa Laval - Plate Heat Exchanger Gaskets | NEW ROC PHE ...

Models A=mm B=mm Assembling Type Material M3 375 60 Clip Lock EPDM/NBR/FKM M6 640 140 Clip Lock EPDM/NBR/FKM M6B 640 140 Clip Lock EPDM/NBR/FKM M10B 871 371

Semi-welded plate heat exchanger for industrial ...

Furthermore, each semi-welded plate cassette and fully assembled plate heat exchanger are thoroughly leak tested with helium before they leave the Danfoss factory. Availability. Our new line of Semi-welded plate heat exchangers is available now in Europe, Middle East and Africa. It will be available in the rest of the world during 2019.

HeatExchangerSpares - Stokvis - Stokvis Plate Heat ...

HRS Group companies are specialist in heat transfer technology; design and manufacture corrugated tube, scraped surface and plate heat exchangers, piston pumps, process systems and aseptic fillers for industrial processes of different sectors.

Save Money with Regular Plate and Frame Heat Exchanger ...

A plate-and-frame heat exchanger is a compressed pack of thin, vertically standing, corrugated metal plates usually made from stainless steel with open ports for the passage of two fluids between which the heat transfer will occur.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.