Tel: +86-371-86151827

hot dip alloy coated sheets

Steel grade:hot dip alloy coated sheets

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot dip alloy coated sheets Introduction

[PDF]

Hot-dip aluminum-coated steel sheets

We have been manufacturing hot-dip aluminum-coated steel sheets under the name “ALSHEETTM” since July 1961, and it has been widely adopted thanks to its superior features, such as for vehicle mufflers (silencers), toasters, and gas cookers. In recent years, there have been calls for the development of materials to succeed

Hot Dip Aluminium Coated Steel Sheet (AL COAT) — BARO …

Hot Dip Aluminium Coated Steel Sheet (AL-COAT) Product Features . Hot-dip aluminum coated steel sheet combines the mechanical properties of cold-rolled steel sheet with aluminum’s high resistance retention, heat reflection, and superior rust resistance.[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Electrolytic zinc-nickel alloy-coated steel sheet and strip Zn-Si-Ni alloy coated steel sheet and strip Nickel Coated Steel Sheet and strip Topcoat Base metal Zn Hot-dip zinc-aluminum-magnesium-silicon alloy coated steel sheet and strip Hot-dip 55% aluminum-zinc alloy-coated steel sheet and strip Sn-Zn layer Special film Intro-duction page ...[PDF]

HOT DIP GALVANIZED - AK Steel

HOT DIP GALVANIZED STEEL, known as ZINCGRIP ... Deep Drawing Steel, and Extra Deep Drawing Steel are designations described in the ASTM specifications for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot Dip Process A653/A653M. Each of the steel sheet designations is associated with unique requirements ...[PDF]

ZAM is a highly corrosion-resistant hot-dip coated steel ...

1 Nisshin Steel Quality Products ZAM® is a highly corrosion-resistant hot-dip Zinc-Aluminum-Magnesium alloy coated steel sheet that Nisshin Steel has succeeded in launching on the market for the first time in the world. Due to the effects of magnesium and aluminum, ZAM ® has excellent cor- rosion resistance, scratch resistance as well as formability, and can be[PDF]

Hot-Dip Zn-5% Al Alloy-coated Steel Sheets “JFE …

“Hot-dip zinc-5% aluminium alloy-coated steel sheet and strip,” and prepainted products of this material were standardized under JIG G 3118, “Prepainted hot-dip zinc-5% aluminium alloy-coated steel sheets and coils”. In addition to Zn and Al, these standards permit trace amounts of elements such as Mg and the rare earth ele-Authors: Fujisawa Hideshi · Ishikawa HiroshiAbout: Corrosion · Building material

Galvanized And Alloy Coated - russelmetals

protective coating because of its extremely slow oxidation rate and its protective sacrificial action which inhibits corrosion of the steel. Zinc coated steel sheets are produced on modern continuous hot dip or electro-galvanizing lines, and the finished product is excellent in appearance, formability, and the coatings’ adhesion and uniformity.[PDF]

Continuously Hot-Dip Coated Steel Strip and Sheet

processors of cont inuous hot-dip coated sheet metal shoul d know. This document provides informa-tion to users and processors of hot-dip coated strip and sheet about the curre nt state of availability. It is a compilation of the characteristic properties for hot-dip coated strip and sheet metal and should help to prevent misundersta ndings

aluminum zinc alloy coated steel sheet- Aluminum/Al foil ...

aluminum zinc alloy coated steel sheet . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

Standard Specification for Steel Sheet, Zinc-Coated ...

A568/A568M Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for. A902 Terminology Relating to Metallic Coated Steel Products. A924/A924M Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process. B6 Specification for Zinc

Hot dip Al zn Alloy Coated Coil - natural-elements-online

Hot Dip Al-Zn Alloy Coated SheetThis kind of hot dip Al-Zn coated sheet can be divided into two types according to different aluminum contents: coated galvalume sheet and coated galfan sheet. the coated galvalume sheet is mainly used in roofs, side walls, cars, household appliances, and painting work.

Coated Sheet,Galvanized Steel Sheet,Al-Zn alloy Coated ...

Hot Dip Al-Zn Alloy Coated SheetThis kind of hot dip Al-Zn coated sheet can be divided into two types according to different aluminum contents: coated galvalume sheet and coated galfan sheet. the coated galvalume sheet is mainly used in roofs, side walls, cars, household appliances, and painting work. Its coating consists of 55% aluminum, 43.4% ...[PDF]

1. Metallic-Coated Products and Specifications ...

GalvInfoNote Hot-Dip Coated Sheet Products 1.2 REV 1.2 AUG 2017 Introduction GalvInfoNote 2.1 describes the steel sheet hot-dip coating process, explaining how it is used to make seven different types of coated products. These products, and the specifications to which they are made, ... Hot-Dip Zinc-5% Aluminum Alloy Coated Steel Sheet (A875/A875M)

Hot-dip coated sheet - thyssenkrupp-materials-processing ...

Hot-dip coated sheet Depending on the application, different surface finishes are used for the hot-dip coating of sheet. The main priority for Z/GI, ZF, ZA, ZM, AZ coatings is the outstanding oxidation resistance based on zinc as well as the high-quality appearance combined with the strength of steel.

Hot Dipped Galvanized – Rolled Steel Products « Rolled ...

Galvanized / Galvannealed ASTM A-653 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. The material is available in several designations as follows: commercial steel, forming steel, deep drawing steel, extra deep drawing steel, structural ...

Hot Dip Al-Zn Alloy Coated Sheet - changsongsteel

Hot Dip Al-Zn Alloy Coated Sheet . Description: This kind of hot dip Al-Zn coated sheet can be divided into two types according to different aluminum contents: coated galvalume sheet and coated galfan sheet. The coated galvalume sheet is mainly used in roofs, …

ASTM A 792/A 792M—08 Specification for Steel Sheet, 55% ...

ASTM A 792/A 792M—08 Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated by the Hot-dip Process (PDF Download) Skip to the end of the images gallery ... This specification covers 55% aluminum-zinc alloy-coated steel sheets in coils and cut lengths for applications requiring corrosion resistance or heat resistance or both. The ...

Continuous hot-dip zinc-coated and zinc-iron alloy-coated ...

iso.org› …› Browse by ICS› 77› 77.140› 77.140.50ISO 4998:2014 specifies continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality. The product is intended for applications where resistance to corrosion is of prime importance. The steel sheet is produced in a number of grades, coating masses, ordering conditions, and surface treatments.

Hot dip Al zn Alloy Coated Coil - natural-elements-online

Hot Dip Al-Zn Alloy Coated SheetThis kind of hot dip Al-Zn coated sheet can be divided into two types according to different aluminum contents: coated galvalume sheet and coated galfan sheet. the coated galvalume sheet is mainly used in roofs, side walls, cars, household appliances, and painting work.

ASTM A755 / A755M - 18 Standard Specification for Steel ...

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.. ASTM Standards. A463/A463M Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process. A653/A653M Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip …[PDF]

ZINCALUME Steel Grade 33 Grade Data Sheet - …

ZINCALUME® Steel Grade 33 Grade Data Sheet General Description ZINCALUME® Steel Grade 33 - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 33 ksi with good ductility. Typical Uses Roll-formed roofing and siding.

ZAM® - Zinc, aluminum and magnesium alloy coated steel

Wheeling-Nisshin is proud to announce our newest product, ZAM ® - branded the "Corrosion protection of the 21 st Century". ZAM ® is a remarkably superior corrosion-resistant hot-dip Zinc-Aluminum-Magnesium alloy coated steel sheet product. Wheeling-Nisshin is the first company in the Americas to produce such a product.

Continuous Sheet Galvanizing | American Galvanizer's ...

Continuous sheet galvanizing is also a hot-dip process, but is only applied to steel sheet, strip, and wire. A coil-to-coil process, steel sheets from 0.010 to 1.70 inches (0.25 mm to 4.30 mm) thick and up to 72 inches (1,830 mm) wide is passed as a continuous ribbon through cleaning baths and molten zinc at speeds up to 600 feet per minute.[PDF]

ASTM COATING WEIGHT DESIGNATION OF COATED …

ASTM Coating Weight Designation of Coated Sheet Steel for Construction Applications 2 within the patent limits. Thus, the ASTM specifications, necessarily, reflect these patents’ ranges. Table 1. Construction Hot-Dipped Coatings Type of Coating ASTM Number Coating Designation ASTM-Specified Coating Pot (Bath) Chemistry A HDGB A 653 G30 G40 G60[PDF]

Study of the Mechanical Properties of N. Coni the Hot …

Galvalume® is the trade name of steel sheets coated with 55%Al-Zn alloy. It is applied by a continuous hot dip process similar to that of galvanized coatings. This coating combines the durability of aluminium and the galvanic protection of the zinc, resulting in a product …Published in: Journal of The Brazilian Society of Mechanical Sciences and Engineering · 2009Authors: N Coni · M L Gipiela · Ana Sofia C M Doliveira · Paulo Victor Prestes MarcondesAffiliation: Federal University of Parana

Comparison of properties with various types of coated ...

Comparison of properties with various types of coated steel sheets Corrosion resistance on flat parts ZAM ® has better resistance to red rust than galvanized and hot-dip zinc-5% aluminum alloy coated steel sheets.

Surface Finishing Tutorial | Technical Tutorial - MISUMI

Hot-dip galvanized steel sheets constitute more than 80% of the total production volume of hot-dip galvanized steel sheets. Since not many of them are used as-is, they are usually coated prior to use.For those that are adopted without the coatings, they used be treated with chromate in order to prevent generation of white rust after being plated.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.