Tel: +86-371-86151827

a633 grade e steel plate property

Steel grade:a633 grade e steel plate property

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a633 grade e steel plate property Introduction

ASTM A633-E, Grade A633-E, A633-E steel - BEBON STEEL

ASTM A633-E steel is a kind of material for boiler and pressure vessel steel. So, ASTM A633-E steel is used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. ASTM A633-E steel is widely used in shipping building, engineer construction and mechanical manufacturing.. About ASTM A633-E steel, we can offer the following A633-E steel plate specification:[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. A633 Grade E has a minimum yield strength of 60 ksi [415 MPa] and may be ordered with supplemental Charpy V-notch impact test requirements.

ASTM A633 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A633. The ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness.

ASTM A633 gr A,A633 gr C,A633 gr D steel for fine-grain ...

A steel plate/sheet supplier/Chinese supplier, A 633 Gr. A steel plate/sheet mechanical property, A 572 Gr. 42 steel plate/sheet price. ASTM A633 gr A,A633 gr C,A633 gr D steel plate steel equivalent grade: A 633 Gr. A steel plate/sheet is in ASTM - SAE standard, the grade number is 1.0491. The equivalent material of A 633 Gr.

ASTM A633 Marine & OffShore Steel Plate | BBN Steel

A633 is a normalized high-strength low-alloy structural steel plate. It is suited for service at low ambient temperatures of —50°F or higher where notch toughness better than expected is desired.

A633GrE,A633 Grade E,A633GrE PLATE - Mild steel plate ...

Low alloy high strength steel plate A633 Grade E is in steel standard ASTM A633/A633M.For the thickness above 75mm,low alloy steel plate A633Gr.E need to be done double normalized.For steel plate A633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel plates can reach 350mm with ...

ASTM A633 Grade D high strength low alloy steel plate ...

ASTM A633 Grade D high strength low alloy steel plates are main products of BBN steel. The manufacturing process of ASTM A633 Grade D high strength low alloy steel plate is: raw material inspection -raw material pickling - raw material cutting-raw material heating-perforation process-rolling-heat treatment- A633 Gr.D property checking-inspection- A633 Gr.D steel packing.

A633 Grade C,A633 Gr.C,A633GrC steel plate__Steel Supplier

Gangsteelis specialized in supplying ASTM A633 steel plate in Grade C.For more information of A633 Grade C steel plates, please check them in following: Chemical composition % of the Product analysis of grade A633 Grade C

ASTM A633 Grade C - Steel - Matmatch

ASTM A633 Grade C. Equivalent standard names. GOST 19281 Grade 15GF GOST ... AA Grade 6061 T651. AISI 314 annealed plate. AISI 348 soft tempered wire. AIR 9160 Grade 9160C211 solution annealed and stabilized (sheet) bar, sheet ... AIR 9160 Grade 9160C231 solution treated and tempered bar. Suggested reading. Carbon Steel: Properties, Production ...

Application of ASTM A633 Grade E steel plates steel plate ...

ASTM A633 Grade E steel plates belong to normalized high strength low alloy structural steel for welded, riveted, or bolted construction. A633 Grade E steel plates are mainly used in oil, chemical, power station, boiler and other industries, for the production of reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell ...

A633 Grade C,A633 Gr.C,A633GrC steel plate__Steel Supplier

Gangsteelis specialized in supplying ASTM A633 steel plate in Grade C.For more information of A633 Grade C steel plates, please check them in following: Chemical composition % of the Product analysis of grade A633 Grade C

ASTM A633 Grade A C D E for Sale - steelplatecuttingpart

ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates. ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade: ASTM A633Grade A,C,D,E (A633GRA, A633GRC, A633GRD, A633GRE)

a633 steel properties - w3s.in

ASTM A633 - SSAB high-strength steelThe ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E …

A633 Gr A property - pressure vessel steel plate grades

Anyway, if you want to find A633 Gr A property, pressure vessel steel plate grades plate/sheet supplier, A633 Gr A property, pressure vessel steel plate grades plate/sheet bar manufacturer, A633 Gr A property, pressure vessel steel plate grades plate/sheet bar exporter, please contact steel…

A633 Gr.D - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A633 Gr.D can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

A633 Grade C Low-Alloy High-Strength Steel--HENAN …

1. Henan Hzz Iron & Steel Co., Ltd can supply A633 Grade C normalized high-strength low-alloy structural steel plates for welded, riveted or bolted construction.. 2. Standard: A633 Grade C steel plate is according to ASTM A 633/A 633M. 3. Application: A633 covers normalized high-strength low-alloy structural steel plates for welded, riveted or bolted construction.

ASTM A 633 Gr. A,ASTM A 633 Gr. A steel plate,ASTM A 633 ...

A 633 Gr. A steel plate/sheet, ASTM - A 633 Gr. A steel plate/sheet, A 633 Gr. A steel plate/sheet supplier/Chinese supplier, A 633 Gr. A steel plate/sheet mechanical property, A 572 Gr. 42 steel plate/sheet price. ASTM - A 633 Gr. A steel equivalent grade: A 633 Gr. A steel plate/sheet is in ASTM - SAE standard, the grade number is 1.0491.

Delta Steel, Inc. - Plate

19% minimum in 2” (for plate 24” and wider) ASTM A633 GR E. A “normalized” high strength low alloy steel plate for construction. This product is suited for service at low ambient temperatures of -50oF (-45oC) and higher when notch toughness better than that expected in an “As-rolled” material of a comparable strength level is desired.

Bethlehem Steel ASTM A633 Grade C >2-1/2 to 4 in. thick ...

Bethlehem Steel ASTM A633 Grade C >2-1/2 to 4 in. thick, steel plate (discontinued **) Categories: Metal; Ferrous Metal; Alloy Steel; Low Alloy Steel; ASTM Steel. Material Notes: Particularly well suited for low-temperature use where notch toughness is a requirement and when strength/weight ratios must me maximum for the application.

A633 Grade E steel plate,A633 Grade E steel sheet - JOIN ...

ASTM A633 Grade E structural steel plate application : A633 Grade E steel plate is mainly used in oil, chemical, power station, boiler and other industries, for the production reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum Gas ...

supplier of a633 grade e,A36,Q235B,Q345B steel plate ...

Data Sheet 1 ASTM A633 Grade E - SSABASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. A633 Grade E has a minimum yield strength of 60 ksi [415 MPa] and may be

A633 Steel Plate - ASTM A633 Gr. C Supplier | Universal ...

universalsteelamerica› …› ASTM Structural PlatesUniversal Steel stock A633 Gr. C from ¼” to 4” thick. A633 is provided in the normalized condition, with additional Charpy testing (CVN). A633 is used in structural applications where notch toughness is critical, and it is suitable for environments with lower ambient temperatures.

ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36 Marine ...

ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36 are structural grades of steel plate utilized almost exclusively in the shipbuilding and offshore industries.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.