Tel: +86-371-86151827

seamless 30series cooling coils

Steel grade:seamless 30series cooling coils

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

seamless 30series cooling coils Introduction

Seamless 300 series heating and cooling coils - cafethuys.nl

[PDF] E2 FAN COILS - Krueger-HVAC. COILS All cooling and heating coils shall optimize rows to meet the specified capacity. Coils shall have seamless copper tubes and shall be mechanically expanded to provide an efficient, permanent bond between the tube and fin.

300 series seamless condenser coil - w3s.in

Seamless Coil Tube, Seamless Coil Tube Suppliers and ...A wide variety of seamless coil tube options are available to you, such as astm, aisi, and jis. You can also choose from iso, bv, and sgs. As well as from seamless, welded. And whether seamless coil tube is seamless, erw, or efw. There are 10,180 seamless coil tube suppliers, mainly located in Asia.

Lizheng Stainless Steel Tube & Coil Corp: Tube Coil ...

Lizheng Stainless Steel Tube & Coil Corp is specialized in manufacturing quality tube coil, including helical coil, cooling&heating coil and coil heat exchanger. Lizheng Stainless Steel Tube & Coil Corp is specialized in manufacturing quality tube coil, including helical coil, cooling&heating coil and coil …[PDF]

GENERAL SPECIFICATION FOR COILS - Thermal Corp

GENERAL SPECIFICATION FOR COILS A Division of Nailor International Inc. Thermal Corporation reserves the right to change any information concerning product or specification without notice or obligation. 4/06 Page 1 of 2 CPE UNITS Model CPE units are designed to accept coils up to a total of 8 rows deep. Coils are 1/2" OD seamless copper tube with

Amazon : 316/316L SS Tubing Coil - 3/8" OD x 50 ...

This advertised as 316 or 316L, one of the most corrosive resistance stainless steels but after two months using it in my salt water aquarium, one section of the tube was …User rating: 3.6/5[PDF]

Heating and Cooling Coils - Armstrong International

Heating and Cooling Coils 344 North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim armstronginternational Designs, materials, weights and performance ratings are approximate and subject to change without notice.[PDF]

Water Cooling and Evaporator Coils - daikinapplied

5W Water Cooling Coils – 3 through 12 Rows (12ʺ to 54ʺ FH)..... 26 5EF Evaporator Coils – 2 through 12 Rows (12ʺ to ... 4. Primary Surface - Round seamless copper tubes on 1-1/2" centers. Cupro-nickel tubes are recommended for applications where high acid or sand content tends to be corrosive or erosive. 5. Secondary Surface - HI-F or E ...

Evaporator Coils - DHTDHT

Evaporator Coils Features: OEM and Replacement Coils for Every Application Cross Reference All Major Brands Quick Response Field Measurement Available Competitive Prices Fast Turnaround: 24 hr, 48 hr, 5 Day and 10 Day Ship Available Standard Lead Time is 2 to 3 Weeks Primary Surface: Round seamless copper tubes are mechanically expanded into the fin […]Location: 439 Main Rd Rt 202, Towaco, 07082, NJ

Stainless Steel Condenser Tubes/ Condenser Coil suppliers ...

Stainless Steel Condenser Tubes/ Condenser Coil suppliers in India, A249 condenser tubes, condenser tubes in seamless, welded and welded redrawn formats suppliers in Singapore & Malaysia ... 304 stainless steel cooling condenser coil tube price FOB Price: US $1950-2150 / Ton; condenser stainless steel tube 1 Ton (Min. Order)

Amazon : 316/316L SS Tubing Coil - 3/8" OD x 50 ...

This advertised as 316 or 316L, one of the most corrosive resistance stainless steels but after two months using it in my salt water aquarium, one section of the tube was …User rating: 3.6/5[PDF]

Heating and Cooling Coils - Armstrong International

Heating and Cooling Coils 344 North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim armstronginternational Designs, materials, weights and performance ratings are approximate and subject to change without notice.

Evaporator Coils - DHTDHT

Evaporator Coils Features: OEM and Replacement Coils for Every Application Cross Reference All Major Brands Quick Response Field Measurement Available Competitive Prices Fast Turnaround: 24 hr, 48 hr, 5 Day and 10 Day Ship Available Standard Lead Time is 2 to 3 Weeks Primary Surface: Round seamless copper tubes are mechanically expanded into the fin […][DOC]

Section 23 82 16 - AIR COILS

· Web viewK. Vents and Drain: Coils that are not vented or drainable by the piping system shall have capped vent/drain connections extended through coil casing. L. Cooling Coil Condensate Drain Pan: Section 23 73 00, INDOOR CENTRAL-STATION AIR-HANDLING UNITS or Section 23 74 13, PACKAGED, OUTDOOR, CENTRAL-STATION AIR-HANDLING UNITS.

Stainless Steel Condenser Tubes/ Condenser Coil suppliers ...

Stainless Steel Condenser Tubes/ Condenser Coil suppliers in India, A249 condenser tubes, condenser tubes in seamless, welded and welded redrawn formats suppliers in Singapore & Malaysia ... 304 stainless steel cooling condenser coil tube price FOB Price: US $1950-2150 / Ton; condenser stainless steel tube 1 Ton (Min. Order)

Precision Coils - Coil Specifications

Condensing Coils (3/8" Coils) - 600 psig / 300° F Condensing Coils (1/2" & 5/8" Coils) - 300 psig / 300° F. Fins Coils shall be plate fin type construction providing uniform support for all coil tubes. Coils are to be manufactured with die-formed aluminum or copper fins with self spacing collars which completely cover the entire tube surface.

Stainless Steel Coils Suppliers - ThomasNet

thomasnet› Supplier DiscoveryDistributor of stainless steel coils. 301, 302/304, 17-7, 316-L, 321 and 347 grade stainless steel alloys are available in thicknesses from 0.0002 in. to 0.031 in. Quarter, half and full hard, tempered and annealed stainless steel materials are available.[PDF]

Sentry-Guard Freeze Proof Coils - USA Coil & Air

Chilled water coils can be 5 to 10 times as expensive to replace as heating coils due to increased rows, size, weight, etc. Many applications such as kitchens, health facilities and industrial applications require 100% exhaust. These systems work 365 days a year and any mechanical malfunction can cause heating or cooling coils to freeze.

Stainless Steel Tube Coils, Stainless Steel Tube Coils ...

A wide variety of stainless steel tube coils options are available to you, such as astm, aisi. You can also choose from iso, bv. As well as from seamless, welded. And whether stainless steel tube coils is erw, or spiral welded. There are 45,546 stainless steel tube coils suppliers, mainly located in Asia.[PDF]

WATER COOLING COILS 5/8” OD TUBE - Colmac Coil

5/8” Water Cooling Coils WATER COOLING COILS 5/8” OD TUBE ... † Seamless copper tube in accordance with ASTM B88. † Headers individually sized to coils to minimize water pressure drop. Coil Casing † Mill Galvanized sheet metal with full slotted flanges for convenient mounting.

China Heating and Cooling Coils, Stainless Steel - China ...

China Heating and Cooling Coils, Stainless Steel, Find details about China Heating and Cooling Coils, Annealed Stainless Steel Seamless from Heating and Cooling Coils, Stainless Steel - Zhangjiagang Channel Int′l Co., Ltd.[PDF]

Seamless or welded pipes? - BUTTING

The decision whether to use a seamless or welded pipe depends principally on the wall thickness / diameter ratio and the specified pipe tolerances. Availability For the manufacture of seamless hot rolled pipes, a limited number of alloys is available. By contrast, there is generally no shortage of steel plates and coils[PDF]

STEAM HEATING COILS HOT WATER CHILLED WATER …

COOLING COILS Chilled Water Air Cooling Coils for Air Conditioning and Process Cooling which can be used with ethylene or propylene glycol solutions for low temperature applications. Two tube and fin configurations are offered which enable coils to be manufactured in almost any size to suit Ducting, Plenums and Air Handling Units.

Pipe in sizes according to ANSI/ASME - Sandvik

Sandvik holds a large stock of seamless, stainless pipe in sizes according to ANSI/ASME. The pipe is delivered in random lengths or cut to fixed lengths.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.