Tel: +86-371-86151827

201 nickel steel plates 9 percent

Steel grade:201 nickel steel plates 9 percent

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

201 nickel steel plates 9 percent Introduction

[PDF]

9% Nickel Steel: For use at cryogenic temperatures

9% Nickel steel has been recognized by the ASME Code for cryogen-ic use since 1954 and has been widely used for storage of oxygen, nitrogen and other liquefied gases in competition with stainless steel, other austenitic alloys and aluminum. Specifications and Codes Material specifications for ArcelorMittal USA 9% Nickel plate (UNS

Properties and Composition of Type 201 Stainless Steel

201 stainless steel is an alloy that contains half the nickel and increased manganese and nitrogen of more popular steels. While it is less expensive than some other alloys (because of its low nickel content), it is not as easy to work or form.

Nickel 201 UNS N02201 Ni 99.6 C 0.02 Description - HPALLOY

Nickel 201 is the low carbon version of Nickel 200. It is preferred to Nickel 200 for applications involving exposure to temperatures above 600°F. With low base hardness and lower work-hardening rate, it is particularly suited for cold forming.

Nickel 200 & Nickel 201: Nickel Alloys and Nickel Copper ...

Nickel 200 & Nickel 201: Nickel Alloys and Nickel Copper Alloys Nickel 200 Alloy is a commercially pure nickel that exhibits good corrosion resistance and has rather low electrical resistivity. It’s used in caustic solutions, food handling equipment, and general corrosion-resistant parts and structures.

nickel steel plates 9% - hopkinsplasticsurgery

Steel Plates 9% Nickel Wholesale, Steel Suppliers - AlibabaSteel plates 9% nickel products are most popular in North America, Eastern Europe, and Western Europe. You can ensure product safety by selecting from certified suppliers, including 166 with ISO9001, 11 with Other, and 8 …[PDF]

Stainless 302, 304, 304L, 305 - Specialty Stainless Steel ...

Stainless 302, 304, 304L, 305 1 .888 282 3292 | UPMET.COM. Types 302 (S30200), 304(S30400), 304L (S30403), and 305 (S30500) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family.

Standard Specification for Pressure Vessel Plates, Alloy ...

A353/A353M - 04 Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered , alloy steel, alloy steel plate, pressure containing parts, pressure vessel steels, steel plates, steel plates for pressure vessel applications,[PDF]

ALLOY 200 201 DATA SHEET - JACQUET

commercially pure nickel. The alloys differ only in the maximum carbon level allowed by specification, 0.15 % maximum for Alloy 200 and 0.02 % maximum for Alloy 201.

US2982018A - Method of welding 9 percent nickel steel ...

METHOD oF WELDING 9%N1CKEL STEEL PLATES Filed Sept. 25, 1958 Hijo/weg. United States METHOD E WELDING 9 PERCENT NICKEL STEEL PLATES William L. Neely, Chadds Ford, Pa., assignor to Lukens Steel Company, Coatesville, Pa., a corporation of i Pennsylvania Filed sept. 2s, 195s, ser. No. 763,302 . s claims.Cited by: 4

201 Stainless Steel - NKS

Welding: Type 201 can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels. Filler metal of the conventional chromium-nickel analyses can be used. Like other austenitic stainless steels where carbon is not controlled below 0.03%, Type 201 is susceptible to intergranular corrosion in the weld heat affected zone.

what is the difference between 304 and 201 stainless steel

Difference between stainless steel 201 and 304 - BEBON . Specifications: used 201 stainless steel and 304 stainless steel plate is divided into two types, actually is the component different from 304 quality better, but expensive, 201 worse. 304 imported stainless steel plate 201 is made of stainless steel plate.

Nickel 201, Gilat, निकल - Pratap Steel, Mumbai | ID ...

With the assistance of our deft team of professionals, we are able to introduce a broad array of NICKEL 201. This 201 grade is manufactured using quality Nickel metal alloy and latest techniques. The materials used in making of 201 grades are available in fully annealed form with standard hardness.

supplier of stainless steel composition,A36,Q235B,Q345B ...

s355jr Boiler and Pressure Vessel Steel Plate. S355JR is a kind of low alloy steel under EN10025 standard. S355JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

what is the difference between 304 and 201 stainless steel

Difference between stainless steel 201 and 304 - BEBON . Specifications: used 201 stainless steel and 304 stainless steel plate is divided into two types, actually is the component different from 304 quality better, but expensive, 201 worse. 304 imported stainless steel plate 201 is made of stainless steel plate.

nickel steel plates 9% for LNG Sorage

Nickel Steel Plates 9% For Lng Sorage , Find Complete Details about Nickel Steel Plates 9% For Lng Sorage,Nickel Steel Plates 9%,Nickel Steel Plates 9%,9% Nickel Steel from Steel Sheets Supplier or Manufacturer-Tianjin Fajiu Metal Materials Co., Ltd. Design Codes - Plant - … GB T3274 Q345A low alloy steel plate Chemical composition[PDF]

Nickel 200 & 201 Web - Special Metals Corporation

Nickel 200 & 201 specialmetals Nickel °F 10-6 in/ †°F Btu†in/ft2†h†°F ohm•†circ mil/ft Commercially pure or low-alloy nickel has characteristics that are useful in several fields, notably chemical processing and electronics. Nickel is highly resistant to various reducing chemicals and is unexcelled in resistance to ...

GB 24510: 9 Percent Nickel steel plates for pressure ...

GB 24510: 9 Percent Nickel steel plates for pressure vessels with specified low temperature properties by Standardization Administration of China (SAC) Publication date 2009[PDF]

Nickel steel plates - Voestalpine

9% Nickel steel 5 mm 60 mm Width 1,600 mm 3,800 mm extra wide thin plates: up to 2,800 mm for 5 mm thick 9% Nickel steel plates Length 12,400 mm Weight per plate 10 mt. Year Application Destination 2011-2012 Ethylene cargo tank Shanghai 2007-2009 Ethylene cargo tank Italy 2006-2008 Ethylene cargo tank Romania

supplier of stainless steel composition,A36,Q235B,Q345B ...

s355jr Boiler and Pressure Vessel Steel Plate. S355JR is a kind of low alloy steel under EN10025 standard. S355JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.[PDF]

Special steel plates - industeel.arcelormittal

Plates in high thickness austenitic stainless steels or 9% nickel steel, for liquefaction vessels l 304N / 304LN / 316L / 316LN stainless steels l ®Thick CryElso 9Q plates l ®CryElso 3.5 high toughness nickel steels for compressors bodies LIQUEFIED GAS STORAGE Plates for large and small cylindrical, spherical and bullet shaped tanks[PDF]

Standard Specification for Pressure Vessel Plates, Alloy ...

Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered1 This standard is issued under the fixed designation A 353/A 353M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

Standard Specification for Pressure Vessel Plates, Alloy ...

1.1 This specification covers 8 and 9 % nickel alloy steel plates for use in the water quenched and tempered condition intended for the fabrication of welded pressure vessels. 1.2 Material under this specification is available in two types having different chemical composition as follows: 1.4 The ...

Stainless Steel Grade 202 (UNS S20200) - AZoM

Grade 202 stainless steel is a type of Cr-Ni-Mn stainless with similar properties to A240/SUS 302 stainless steel. The toughness of grade 202 at low temperatures is excellent.

Nickel Sheet / Plate - Online Metal Store

Nickel Sheet / Plate Nickel Alloy Sheet vary depending on alloy, yet are all frequently known for their moderately high- very high strength and corrosion resistance. Our selection of Nickel alloys includes 200, 400, 600, 718, C276, K500 and R405.[PDF]

Stainless Steel - Alro Steel

Stainless Steel 201 alloy is a high performance austenitic stainless steel formulated to have a lower and more stable cost due to the substitution of manganese for a portion of the nickel used in 300 series stainless steels such as Type 304. In addition, the chemical composition of alloy 201 provides higher annealed mechanical[PDF]

GB 24510: 9 Percent Nickel steel plates for pressure ...

ICS 77.140.50 H46 中华人民共和国国家标准 GB XXXX-200X 低温压力容器用9%Ni钢板 9%Nickel steel plates for pressure vessels with specified low temperature[PDF]

Welding liquid natural gas tanks and vessels in 5% and …

Welding liquid natural gas tanks and vessels in 5% and 9% nickel steels Table 1 There is growing interest in the ... anical properties for 9% nickel steel and nickel-based weld metal can be found in Table 2 A and B. Austenitic or nickelbased ... platform from the plates …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.