Tel: +86-371-86151827

eaf conductive arm of copper clad steel plate

Steel grade:eaf conductive arm of copper clad steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

eaf conductive arm of copper clad steel plate Introduction

EAF Current Conducting Arm products from China (Mainland ...

seekpart› …› Equipment Series› Other MachineryThe Current conductive arm is made with copper-clad steel plate to be as a rectangular hollow section (RHS) structure and widely used for steelmaking arc furnace, ladle refining furnace and electroslag remelter,etc.The outerCopper plate of arm has good conductive performance and the inner steel Plate has higher strength. The RHS arm is water cooled.

Copper clad steel plate for conductive cross arm_Henan ...

Copper clad steel plate conductive arm is one of the important parts of short network of secondary high current power supply system in steelmaking electric arc furnace and ladle refining furnace. It is a replacement of the old and traditional conductive copper tube arm with obvious cost.

China Electrical Arc Furnace Copper Steel Clad Plate ...

C11000 Clad Plate, Copper Clad Plate, Furnace Clad Plate manufacturer / supplier in China, offering Electrical Arc Furnace Copper Steel Clad Plate, Aluminium5083+Pure Aluminium+Steel Clad Transition Joints as Ship Parts, Aluminum Steel Explosive Welding Clad Block/Electrical Transition Joints and so …

Electrode Arms | Copper/Steel Electrode Arms | Aluminum ...

Current Conducting Copper/Steel Electrode Arms. Current conducting electrode arms are a melt shop proven design that provide efficient cooling as well as reduced electrical loss. The utilization of the copper clad (copper & steel) arms combines the high strength of steel with the high conductivity and current carrying ability of copper.

Conductive Arm for Electric Arc Furnace - Made-in-China

Electrode Arm, Conductive Arm, Conductive Arm for Electric Arc Furnace manufacturer / supplier in China, offering Conductive Arm for Electric Arc Furnace, Three Phase Iron Core Output Reactor, Circuit Breaker; Outdoor AC Hv Sf6 Circuit Breaker and so on.[PDF]

Advanced EAF technologies - Millennium Steel

Slag zone panelThe slag zone is the most critical area in an EAF due to erosion caused by oxidising slag and exothermic expansion of the refractory. The VAI FUCHS solution is a slag zone panel consisting of copper fins indirectly cooled from outside the furnace shell, as shown in Figure 4.

China Electrode Conductive Arm - China Electrode ...

Electrode Conductive Arm, Conductive Arm, Arm manufacturer / supplier in China, offering Electrode Conductive Arm, Hc-Qg-C Panel Cutting Machine, Qgs2 Series Common Type Double Piston Rod Air Cylinder/Pneumatic Cylinder and so on.[PDF]

Compact Modelling of Electric Arc Furnace Electrodes for ...

Compact Modelling of Electric Arc Furnace Electrodes 77 copper layer having a lower electrical resistivity, even helped by the skin effect. The internal structural steel plate is free from Joule heating, therefore it does not affect the EAF performance at all. Conductive arms are directly connected to the[PDF]

High productivity with ELECTRIC ARC FURNACES

Power-conducting electrode arms, made of copper-clad steel or aluminium fea-ture low impedance for high power input. Roof lifting arms The roof lifting arms are arranged in V-form for three-point roof lifting. One arm is shorter than the other, so that after automatic uncoupling of the roof lift hooks, the gantry with lifted arms

Customized Copper+Steel Clad Plate Used for Conductive …

Copper+Steel, Cladding Metal, Copper Clad Sheet manufacturer / supplier in China, offering Customized Copper+Steel Clad Plate Used for Conductive Arm in Steel Plant Suppliers in Dubai, Aluminium5083+Pure Aluminium+Steel Clad Transition Joints as Ship Parts, Aluminum Steel Explosive Welding Clad Block/Electrical Transition Joints and so on.

Electrode Arms | Copper/Steel Electrode Arms | Aluminum ...

Current Conducting Copper/Steel Electrode Arms. Current conducting electrode arms are a melt shop proven design that provide efficient cooling as well as reduced electrical loss. The utilization of the copper clad (copper & steel) arms combines the high strength of steel with the high conductivity and current carrying ability of copper.

Sell - electric arc furnace - Global Manufacturers

gmdu.net› …› Metallurgy Machinery3. Conductive electrode arm is made of copper clad steel plate, reactance can therefore be reduced 4.Furnace shell is consisted of upper shell and lower shell, and water cooled panels are assembled on shell frame and furnace roof frame; This structure is beneficial to replacement of furnace shell by crane with lower lifting capacity 5.

TYMEC - China Effective Power Conductive Arm for Furnace ...

If you are looking for reliable industrial Effective Power Conductive Arm for Furnace for steelmaking, steel industry, and for melting stell from China Effective Power Conductive Arm for Furnace manufacturers, suppliers and company, or if you are checking small Effective Power Conductive Arm for Furnace price, please feel free to contact TYMEC.

Conductive Cross Arms Manufacturers and Supplier ...

Conductive cross arm is made with copper-clad steel plate to be as a rectangular hollow section structure and widely used for steelmaking arc furnace, ladle refining furnace and electroslag remelter,etc. the structure of which is simpler than the type of copper pipe cause which is without lots of insulator between copper pipe, electrode holder and arm structure.

Electrode Arms | FLOHE GmbH & Co. KG

Electrode Arms Electrode arms for AC-EAF, DC-EAF and LF. A one stop shop for engineering, design, manufacturing and commissioning. … current conducting arms manufactured from copper / steel. For Ø 100-800 mm sized electrodes · low operating costs · minimal shutdown times · easy handling · optimum symmetry · highest efficiency level

Commercial Electric Arc Furnace Flexible Smelting ...

Quality Electric Arc Furnace manufacturers & exporter - buy Commercial Electric Arc Furnace Flexible Smelting Temperature With Water Cooled Roof from China manufacturer. Beijing Sino Steel Engineering & Equipment Co., Ltd.

Sell - Electric arc furnace - Global Manufacturers

gmdu.net› …› Other Electrical Equipment3. Conductive electrode arm is made of copper clad steel plate, reactance can therefore be reduced 4.Furnace shell is consisted of upper shell and lower shell, and water cooled panels are assembled on shell frame and furnace roof frame; This structure is beneficial to replacement of furnace shell by crane with lower lifting capacity 5.

Erie Copper Works, Inc. : eriecopperworks

These Copper Clad-Steel arms, fabricated at Erie Copper Works’ plant, are made from a carbon steel plate with explosion-bonded copper cladding. Aluminum conductive arms are fabricated from flat or formed plates of a specific aluminum alloy. In addition to the required mechanical and structural properties, the aluminum alloy must have chemical ...

EA Furnace Components - Hammers Industries

HAMMERS INDUSTRIES: EA FURNACE COMPONENTS. EAF Furnace Components. Click for gallery. LMF Furnaces. Click for gallery. ESR/VAR Furnaces. Click for gallery. ... Machining front of Copper Clad Arm for new face plate. Clamping force test new Copper Clad Arm. Finished Copper Clad Arm.

China Bimetal Copper-Stainless Steel Conductive/Electronic ...

Clad Grounding Electrode, Clad Electrode, Conduct Bar manufacturer / supplier in China, offering Bimetal Copper-Stainless Steel Conductive/Electronic Bar/Electrode, Aluminium5083+Pure Aluminium+Steel Clad Transition Joints as Ship Parts, Aluminum Steel Explosive Welding Clad Block/Electrical Transition Joints and so on.

Electric arc furnace - Wikipedia

An electric arc furnace (EAF) is a furnace that heats charged material by means of an electric arc. Industrial arc furnaces range in size from small units of approximately one ton capacity (used in foundries for producing cast iron products) up to about 400 ton units used for secondary steelmaking.[PDF]

ARC - E.ITEC® Asia

Steel making P49A · AC or DC electric arc furnace · Ladle furnace Main features Market : · Electrode conductive arms, based on a bimetallic copper/steel structure have more or less become a standard on the modern Electric Arc Furnaces. As a most important element of the electrical supply of the furnace, it has to be designed not

Electrode Conductive Arm - ec21

Graphite electrode holder is made of copper. Water cooled circle for the holder is made of stainless steel Electrode Conductive Arm for EAF, electric arc furnace Electrode Conductive Arm for LF ,ladle refining furnace We supply standard and non-standard graphite electrode conductive arm …

Application / electric industry_Henan Chalco Aluminium

The conductive arm is made of copper clad steel plate or aluminum-steel clad plate with rectangular cross-section and water cooling inside. It eliminates many insulation links between water-cooled conductive copper tube, electrode clamp and...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.