Tel: +86-371-86151827

co2 gas shielded flux to cored welding coil

Steel grade:co2 gas shielded flux to cored welding coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: []

co2 gas shielded flux to cored welding coil Introduction

Choosing a Shielding Gas for Flux-Cored Welding

lincolnelectric› Home› SupportChoosing a Shielding Gas for Flux-Cored Welding. It will either be "C" for 100% CO2 or “M” for mixed gas of 75 – 80% argon/ balance CO2 (for example, E71T-1C or E71T-1M). For a low alloy steel electrode, the shielding gas designator follows the deposit composition designator (for example, E81T1-Ni1C).Lincoln Electric · Welding Equipment

Flux Core -VS- Shielding Gas - Miller Welding Discussion ...

Self Shielded, flux-cored wires, the ones used with NO gas, are very susceptible to changes in procedures. This means arc and voltage changes and electrode stick-out changes. In general, they have a very small window for their parameters, compared to either dual shield, or solid wires.

CO2 Gas shielded flux to cored welding wire

Flux-Cored Arc Welding (FCAW) utilizes a continuously-fed tubular electrode, electrical power to melt the Gas-shielded flux-cored wires are used in operations such as shop fabrication, Shielding gas selection can be pure CO2 or C25.

Wodon Anti Wear Gas Shield Flux Cored 15kg Per Coil ...

Wodon Anti Wear Gas Shield Flux Cored 15kg Per Coil Package Co2 Welding Wire , Find Complete Details about Wodon Anti Wear Gas Shield Flux Cored 15kg Per Coil Package Co2 Welding Wire,15kg Per Coil Package Co2 Welding Wire,Gas Shield Flux Cored 15kg Per Coil Package Co2 Welding Wire,Anti Wear Gas Shield Flux Cored 15kg Per Coil Package Co2 Welding Wire from Welding …

flux core welding - Miller Welding Discussion Forums

Inner shield wire is a flux cored tubular wire. It needs no shielding gas, hence the term inner shield. Dual shield wire is a flux cored tubular wire that uses shielding gas. Outer shield wire is only shielded by the gas. I wish the random statements such as "dual shield gives better welds than flux core…

0.8mm co2 gas shielded coiled welding wire - alibaba

Alibaba offers 108 0.8mm co2 gas shielded coiled welding wire products. About 25% of these are welding wires. A wide variety of 0.8mm co2 gas shielded coiled welding wire options are available to you, such as copper / copper alloy, co2, and stainless steel.


Typically in Stock. ESAB® Dual Shield 7100 Ultra® Gas Shielded Flux Core Carbon Steel Tubular Welding Wire of 0.052" Dia efficiently operates in a wider parameter range and produces less welding fumes than much similar flux cored welding wires. The low spatter levels and easy slag removal reduces post weld cleanup.

Esab Dual Shield 7100 Ultra 248000101 E71t Gas Shielded ...

Detailed Description. ESAB® Dual Shield 7100 Ultra® 248000101 Mild Steel Flux-Cored Wire, Gas Shielded, Diameter: 1/16 Inch, Amperage: 195 - 382 amp, Package: 60 lb Coil, AWS Class: AWS A5.20: E71T-1CH8/T-9M-D, Tensile Strength: 85 ksi (As Welded CO2), Yield Strength: 75 ksi (As Welded CO2), Elongation in 2" (%): 26% (As Welded CO2),...

Flux Core -VS- Shielding Gas - Miller Welding Discussion ...

Flux Core -VS- Shielding Gas. They are not approved by any of the major auto manufactuerers for any stressed welding, including body panels. The ER71T-11, which is available in small diameters from some manufacturers, does offer an improvement, but still is not as good mechanically as …

CO2 Gas shielded flux to cored welding wire

Flux-Cored Arc Welding (FCAW) utilizes a continuously-fed tubular electrode, electrical power to melt the Gas-shielded flux-cored wires are used in operations such as shop fabrication, Shielding gas selection can be pure CO2 or C25.

Flux Cored vs Shielding Gas | Which MIG Welder is Best for …

The decision of using Flux Cored vs Shielding Gas welding is one you need to consider when shopping for a portable MIG Welder. Understanding the basic differences of Flux Cored vs Shielding Gas welding will help you make an educated decision on …

What is the Purpose of Flux and Shield Gas in the Welding ...

At the instant the arc is formed and throughout the welding process, both the solid flux and shield gas act to keep atmospheric gases away from the molten pool. Solid flux does this by creating CO2 gas the instant it is burned. This gas acts in the same manner as shield gas, performing the same functions.

Amazon: flux cored welding wire

Amazon: flux cored welding wire. From The Community. ... Titanium type CO2 gas-shielded flux-cored welding wire. Thermadyne 1440-0236 Firepower E71T-GS 10-Pound Spool Metal Inert Gas Wire Flux Cored. by Thermadyne. $69.00 $ 69 00 + $13.78 shipping. Only 1 left in stock - order soon.

Fluxcore with gas ? - Weld Talk Message Boards

weldtalk.hobartwelders› …› Welding ProcessesAlso , all electrode manufacturers have more variety in gas shieled flux cored wires than they do in self shieled. Typical sizes are for all position .045 , .045 and 1/16 . Typical sizes for flat postion is 1/16, 5/64 and 3/32 . You can also find gas shielded flux cores in .035 Typical gases are pure CO2 , 75Ar/25C02 .

Unibraze Smoothcor 81T1-Ni1 Gas Shielded Flux-Cored ...

Detailed Description. Smoothcor 81T1-Ni1 is a low alloy steel electrode for flux cored arc welding with external gas shielding. This electrode is intended for single and multiple pass welding, in all positions, on carbon and low alloy steels requiring good charpy v-notch toughness at subzero temperatures.

Getting the best results in gas-shielded FCAW

thefabricator› Article› Arc WeldingThe demand for flux cored arc welding (FCAW) has grown significantly over the past 10 years. Manufacturers who weld carbon, stainless, low-alloy, and high-alloy steel are turning to this process primarily because: Before you can obtain the best results with gas-shielded FCAW, you must understand ...

Gas-Shielded Flux-Cored Wires (FCAW) | Welding …

Dual Shield B6 is an all-position flux cored electrode designed for using with 75% Ar / 25% CO2 or 100% CO2 shielding gas. Dual Shield B6 is intended for use on pipe and plate steels having a nominal 5% chromium - 0.5% ...

China co2 gas flux cored wire wholesale 🇨🇳 - Alibaba

Wholesale factory price CO2 gas shield solder wire e71t-gs flux cored welding wire e71tgs Description The welding wire is a gasless self-shielding flux cored wire for all-positions and multilayer welding with smooth stable arc,low spatter,easy slag revoval and excellent apperance. 1kg/spool or 5kg/spool or 15kg/spool; Spool+plastic film+color box+pallet; Guaranteed of aluminum arc welding rods ...

Lincoln ED029205 .052 Outershield 71 Elite Flux-Cored Gas ...

Shop our line of Lincoln ED029205 .052 Outershield 71 Elite Flux-Cored Gas-Shielded Wire (60lb Coil). Call us @ 641-201-1352 with any questions.

China Welding Rods, Welding Wire, Welding Flux - China ...

Welding Wire, CO2 Gas Shielded Wire, MIG/ Mag Welding Wire manufacturer / supplier in China, offering Welding Rods, Welding Wire, Welding Flux, Toko E309 Stainless Steel Welding Electrods 2.5/3.2/4.0mm, Toko Brand E71t-1c Flux Cored Welding Wire in Size of 1.2mm and so on.

Flux Core Welding Wire | eBay

ebay› …› Welding Rods & WiresE71T-GS flux core MIG (GMAW) welding wire for mild steel is a self-shielded mild steel all position flux cored MIG welding wire. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel.

Flux-Cored Wires (Gas) - Hobart Brothers Performance ...

Flux-Cored Wires (Gas) Flux-Cored Wires (Self) MEGAFIL® Seamless Wire; Hardfacing; Metal-Cored Wires (Gas) ... All position gas shielded flux cored designed... FabCO® 811N1 A5.29: E81T1-Ni1CJ H4/-Ni1 MJ H4 ... All position wire designed for 100% CO2 gas.... FabCO® 101K3 E100T1-K3C Offers excellent properties on many higher st... FabCO® 105D2

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
0.3-3.0 mm
coil or as per requirement.
coil or as per requirement.
No.1 or 1D
GB/T4237-2015 ASTM A240/A240M JIS G4304
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.


Please send your processing requirement/ the drawings to or leave a message below. Our professional after-sales personnel will response you in 24 hours.