Tel: +86-371-86151827

a633 gr a steel plate specification

Steel grade:a633 gr a steel plate specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a633 gr a steel plate specification Introduction

ASTM A633 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A633. The ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness.

A633 Steel Plate - ASTM A633 Gr. C Supplier | Universal ...

universalsteelamerica› …› ASTM Structural PlatesUniversal Steel stock A633 Gr. C from ¼” to 4” thick. A633 is provided in the normalized condition, with additional Charpy testing (CVN). A633 is used in structural applications where notch toughness is critical, and it is suitable for environments with lower ambient temperatures.

ASTM A633 Marine & OffShore Steel Plate | BBN Steel

A633 is a normalized high-strength low-alloy structural steel plate. It is suited for service at low ambient temperatures of —50°F or higher where notch toughness better than expected is desired.[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. A633 Grade E has a minimum yield strength of 60 ksi [415 MPa] and may be ordered with supplemental Charpy V-notch impact test requirements.

Application of ASTM A633 Grade E steel plates steel plate ...

ASTM A633 Grade E steel plates belong to normalized high strength low alloy structural steel for welded, riveted, or bolted construction. A633 Grade E steel plates are mainly used in oil, chemical, power station, boiler and other industries, for the production of reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell ...

ASTM A633 / A633M - 18 Standard Specification for ...

A633 / A633M-18 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates welded construction~ bolted construction~ riveted construction~ HSLA steel~ steel plates~

a633 steel equivalent - steelsheetplate

leecosteel› …› Offshore and Marine Steel PlateA633 steel plate is a normalized high-strength low-alloy structural steel plates for welded, riveted or bolted construction. A633 plate steel can be used for low ambient temperatures where the desired notch toughness is better than in as-rolled materials of comparable strength level.

A633 Gr.C Standard Specification - Find Steel

Provides A633 Gr.C standard specification, A633 Gr.C datasheet, A633 Gr.C chemical composition , A633 Gr.C mechanical properties, technical specifications of A633 Gr.C steel material properties. A633 Gr.C performance specifications. I am Joy shen,If you have any requirement for steel, please feel free to contact with me at any time.

ASTM A633-E, Grade A633-E, A633-E steel - BEBON STEEL

ASTM A633-E steel is a kind of material for boiler and pressure vessel steel. So, ASTM A633-E steel is used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. ASTM A633-E steel is widely used in shipping building, engineer construction and mechanical manufacturing.. About ASTM A633-E steel, we can offer the following A633-E steel plate specification:

Steel Plate Products - Alloy & Carbon Steel Plates ...

Each plate is received with a high level of scrutiny and accompanied with a Metallurgical Test Report (MTR) from time of receipt through production and final shipment to the customer. Steel plate specifications include, but are not limited to pressure vessel quality (PVQ), chrome-moly, API, ABS, AISI & ASTM from 3/16” up to 12” thick ...[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;

A633 Gr.C - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A633 Gr.C can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

A633 Gr.A - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A633 Gr.A can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

ASTM A633 Steel Plate__Steel Supplier

ASTM A633 specification is normalized low alloy high strength steel plates A633 Grade A, A633 Grade C,A633 Grade D,A633 Grade E.A633 Gr.A|A633 Gr.C|A6. English Chinese Espanol. ... Gangsteelis specialized in supplying ASTM A633 steel plate in Grade C A633 Grade C,A633 Gr.C,A633GrC steel plat.

A633 Gr.D - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A633 Gr.D can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

A633 Grade C,A633GrC,A633 Gr.C steel plate--Xin Steel ...

ASTM A633 Grade C structural quality steel plate meets specifications covering normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction; it is the standard specification for normalized high-strength low-alloy structural steel plates.

ASTM A633 - SSAB

ASTM A633. The ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness.

a633 steel equivalent - steelsheetplate

leecosteel› …› Offshore and Marine Steel PlateA633 steel plate is a normalized high-strength low-alloy structural steel plates for welded, riveted or bolted construction. A633 plate steel can be used for low ambient temperatures where the desired notch toughness is better than in as-rolled materials of comparable strength level.

A633 Gr.C Standard Specification - Find Steel

Provides A633 Gr.C standard specification, A633 Gr.C datasheet, A633 Gr.C chemical composition , A633 Gr.C mechanical properties, technical specifications of A633 Gr.C steel material properties. A633 Gr.C performance specifications. I am Joy shen,If you have any requirement for steel, please feel free to contact with me at any time.

ASTM-A633 | Standard Specification for Normalized High ...

This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. This material is suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level.

Astm A633 Steel Plate - indiamart

Aesteiron Steels LLP - offering ASTM A633 Steel Plate, 0-1 Mm, 1-2 Mm, 2-3 Mm, 3-4 Mm, 4-5 Mm, >5 Mm in Mumbai, Maharashtra. Read about company and get contact details and address. | …

A633 Grade C,A633 Gr.C,A633GrC steel plate__Steel Supplier

Gangsteelis specialized in supplying ASTM A633 steel plate in Grade C.For more information of A633 Grade C steel plates, please check them in following: Chemical composition % of the Product analysis of grade A633 Grade C

ASTM A 633 Gr. A,ASTM A 633 Gr. A steel plate,ASTM A 633 ...

ASTM - A 633 Gr. A steel mechanical property: ASTM A633Gr.A steel plate/sheet, ASTM A633Gr.A steel plate/sheet, under ASTM standard, we can regard A633Gr.A steel plate/sheet for Fine-grain structural steels, thermomechanically rolled steel.

ASTM A633/A633M-18 - techstreet

ASTM A633/A633M-18 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates ... 1.3 Four grades, designated Grades A, C, D, and E are covered by this specification. Grade A provides a minimum yield point of 42 ksi [290 MPa]. Grades C and D provide a minimum yield point of 50 ksi [345 MPa] in thicknesses up to 2.50 ...

Alloy Steel Plates, Plate Sheets, Plate Sheets Exporter

astm a633 (standard specification for normalized high strength low alloy structural steel plates) astm a633 grade a astm a633 grade c astm a633 grade d astm a633 grade e astm a645 (standard specification for pressure vessel plates, 5% and 5½% nickel alooy steels specially heat treated ) astm a645 grade a astm a645 grade b

ASTM A633 Grade C/A633 Gr.C steel plates - BBN Steel

As leading ASTM A633 Grade C/A633 Gr.C steel plates supplier and exporter, BBN steel can not only provide you good price A633 Gr.C steel plates with guaranteed quality, but also has built professional technical team, and can give your answers for all kinds of questions about ASTM A633 Grade C/A633 Gr.C steel plates.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.