Tel: +86-371-86151827

cold rolled 55 percent alloy coated steel sheets

Steel grade:cold rolled 55 percent alloy coated steel sheets

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled 55 percent alloy coated steel sheets Introduction

[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Hot-dip 55% aluminum-zinc alloy-coated steel sheet and strip ALSHEETTM Hot-dip aluminum-coated steel sheet and strip ... Coated Steel Sheets of Nippon Steel & Sumitomo Metal Corporation weldability, paintability, and various other properties as ... sheets are higher than those for cold-rolled steel sheets. •Example of Appropriate Welding ...

Metal Types | Metal Coaters

The Galvannealed surface has a non-spangled matte finish appearing similar to uncoated cold rolled steel. Galvalume: A metal substrate consisting of cold rolled steel coated with a metallic coating of 55 percent aluminum and 43.5 percent zinc.[PDF]

PROPERTIES FOR STEEL SHEETS – COLD ROLLED & HOT …

INDUSTRY PROPERTIES FOR STEEL SHEETS – COLD ROLLED & HOT DIPPED ZINC COATED Typical Ranges For Mechanical Properties – Yield And Elongation Are Nonmandatory Cold Rolled C% Mn% P% S% Al% Hardness¹ Yield ksi Elong% r-value n-value CS Type A 0.10 max 0.60 max 0.030 max 0.035 max * B65 max 20-40 30 min – –

55% Aluminum-Zinc Coated Steel | Cascadia Metals

55% Aluminum-Zinc Alloy Coated Steel is cold-rolled carbon steel with a metallic coating composed of Aluminum (55%), Zinc (43.4%) and Silicon (1.6%). The generic product reference is 55% Aluminum-Zinc Alloy Coated Steel, although there are trademarked names for the same product.

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc ...

A90/A90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings. A568/A568M Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for. A902 Terminology Relating to Metallic Coated Steel …

Aluminum- Zinc alloy Coated Steel Sheet (ALCOAT) - SASCO

Aluminum-Zinc Alloy Coated Steel Sheet - Galvalume. The alloy coating comprises about 55% aluminum, 43.4% zinc and 1.6% silicon. This coating combines the superior corrosion resistance of aluminum with the cut edge protection of zinc.

Carbon Steel - Flat Rolled - samuel

Galvalume Carbon Steel. Galvalume product is an aluminum-zinc alloy coated steel with enhanced corrosion protection. The product is produced with a continuous hot-dip process resulting in approximately 55% aluminum, 43.4% zinc and 1.6% silicon by weight. The product offers both corrosion and heat resistance.

ASTM Standards for Flat-Rolled Steel

For cold-rolled products, the consolidated standard was designated as A 1008/A 1008M, Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability. This consolidated product standard included all or parts of the following:

Cold Roll - Online Metal Store

Cold Roll is limited to a few shapes but comes in many finishes and offers superior strength and machinability. Our cold roll steel material selection offers an extensive assortment of shapes, finishes and alloys, which can be cut-to-size for just the amount you need. View the "Alloy Steel Guide" for grades, shapes & various properties.

Cold-formed steel - Wikipedia

Cold-worked steel products, such as cold-rolled steel (CRS) bar stock and sheet, are commonly used in all areas of manufacturing of durable goods, such as appliances or automobiles, but the phrase cold-formed steel is most prevalently used to describe construction materials. The use of cold-formed steel construction materials has become more ...History·

Coated steel News, Coated Steel Prices & Analysis | Metal ...

The latest global coated steel news, coated steel prices and expert market analysis. ... US cold-rolled, coated steel prices unchanged by mill increases. Chicago Feb 8, 2019 @ 22:13 ... US steel sheet import prices slip; buyers wary. Chicago Jan 10, 2019 @ 23:17 ...

MetalsDepot® - Buy Steel Sheet Online - Any Quantity, Any ...

C1008/1010 CRS Steel Sheet - (ASTM A366) Cold Rolled Steel Sheets are rolled to a close thickness tolerance and possess a fine, smooth surface providing a excellent base for painting . CRS Steel Sheets are easy to weld, form, drill.

Hot Rolled Carbon – Olympic Steel

olysteel› ProductsOlympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ASTM and AISI standards, as well as branded products COR-TEN®, DOMEX ™, EX-TEN®, FREMAX® steel products and more.[PDF]

PROPERTIES FOR STEEL SHEETS – COLD ROLLED & …

INDUSTRY PROPERTIES FOR STEEL SHEETS – COLD ROLLED & HOT DIPPED ZINC COATED Typical Ranges For Mechanical Properties – Yield And Elongation Are Nonmandatory Cold Rolled C% Mn% P% S% Al% Hardness¹ Yield ksi Elong% r-value n-value CS Type A 0.10 max 0.60 max 0.030 max 0.035 max * B65 max 20-40 30 min – –

ASTM A792 G550 Az150 55 percent Al Steel Coil - w3s.in

ASTM A792 G550 Az150 55 percent Al Steel CoilA wide variety of 55% aluminum-zinc alloy coated steel sheet options are available to you, such as din, jis, and astm. Commercial Cold Galvanizing Paint, Commercial Cold ... Commercial Steel - ASTM A792 Hot Dip 55% Al-Zn Coated Steel Coil Steel Sheet .

Metal Types | Metal Coaters

The Galvannealed surface has a non-spangled matte finish appearing similar to uncoated cold rolled steel. Galvalume: A metal substrate consisting of cold rolled steel coated with a metallic coating of 55 percent aluminum and 43.5 percent zinc.[PDF]

55% ALUMINUM-ZINC COATED STEEL - Cascadia Metals

55%. Aluminum-Zinc Alloy Coated Steel is cold-rolled carbon steel with a metallic coating composed of. Aluminum (55%), Zinc (43.4%) and Silicon (1.6%). The generic product reference is 55% Aluminum-Zinc. Alloy Coated Steel, although there are trademarked names for the same product such as Galvalume ®.

Steel Dynamics, Inc. - Galvalume® Steel Sheet

Galvalume® steel sheet offers excellent corrosion protection in many applications through the combination of the sacrificial protection of conventional zinc coatings with …[PDF]

2 Materials Used in Cold-Formed Steel Construction

2 Materials Used in Cold-Formed Steel Construction ... Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy with Improved Formability ASTM A792 (Grades 33, 37, 40, and 50A), Steel Sheet, 55% Aluminum– Zinc Alloy-Coated by the Hot-Dip Process ASTM A847, Cold-Formed Welded and Seamless High-Strength, Low-[PDF]

Unpainted GalvalumeTM Steel Fact Sheet - berridge

Galvalume coating is an alloy composed of 55% aluminum and approximately 45% zinc by weight. It is applied on both sides of cold-rolled steel sheet using a precise continuous hot dip process. The result is a highly corrosion resistant coated steel that combines the barrier protection and extended durability of aluminum with the

Cold Rolled Steel - Metal Supermarkets

Metal Supermarkets – Steel, Aluminum, Stainless, Hot-Rolled, Cold-Rolled, Alloy, Carbon, Galvanized, Brass, Bronze, Copper Over 80 locations in North America offering instant access to a wide variety of metal types, shapes, sizes and grades.

Standards - Continental Steel & Tube Company

Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled (Withdrawn 2000) Replaced by A1008 and A1011/A1011M A611 Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

Metal Sheet - Pre-Painted Aluminum - Zinc Alloy Coated ...

Wholesale Trader of Metal Sheet - Pre-Painted Aluminum - Zinc Alloy Coated Steel (PPGL) Sheet, Metal Roofing Sheets, Bare Galvalume Sheets offered …

Carbon Steel - Flat Rolled

Electrogalv product is produced from Cold Rolled sheet steel that is electrolytically coated with zinc or zinc-alloy. Electrogalv product is available in coating weights up to 100 grams / square meter per side. Product can be ordered to minimum or nominal thicknesses.

aluminum zinc alloy coated steel China Al-Zn 5-55% PPGL ...

aluminum zinc alloy coated steel Al-Zn 5-55% PPGL Shandong Gengxiang Import and Export Trade Co.,Ltd is one of the leading China al-zn 5-55% ppgl manufacturers, and with professional factory we are able to provide you cheap al-zn 55% ppgl, al-zn 50% ppgl with good quality.[PDF]

An Evaluation of Acrylic Coated 55% Al-Zn Alloy Coated ...

An Evaluation of Acrylic Coated 55% Al-Zn Alloy Coated Sheet Steel Roofing Material to Determine Whether it Meets the Requirements of the EPA Energy Star® Program for …

What’s the Difference Between Hot and Cold Rolled Steel ...

One key distinction among prefabricated steel products is the difference between hot rolled versus cold rolled steel. ... carbon and other alloy steels. Hot Rolled Steel. ... rolled steel sheets.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.