Tel: +86-371-86151827

sus 630 stainless steel plate

Steel grade:sus 630 stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sus 630 stainless steel plate Introduction

Japan JIS SUS 630, Precipitation-Hardening steel, G 4305 ...

This page cover the Mechanical Properties, Chemical Element, Cross Reference of Japan JIS SUS 630 steel grade, Application Cold-rolled stainless steel plate, sheet and strip, Related specifications G …

JIS G4304 SUS 630 SHEETS|SUS630 Stainless Steel Plate ...

JIS G4304 STAINLESS STEEL JIS G4304 SUS 630 SHEETS|SUS630 Stainless Steel Plate . JIS G4304 standard specification for chromium and chromium-nickel stainless steel plate, sheet, ... Gangsteel is specialized in supplying JIS G4304 stainless steel plates, including SUS301J1 SUS 301/304/309S/310 ...

JIS G4304 630, SUS 630, SS 630 Plate, TP630-SA240 316L ...

JIS G4304 630, SUS 630, SS 630 Plate, TP630 . Unitedsteel Stainless Factory is the large manufacturer to supply JIS G4304 630, SUS630,SS 630 Stainless plate,SUS 630 ASTM, ASME, JIS , EN, UNS Stainless plate and sheet. We have about 3000tons each thickness and size stainless plates …[PDF]

Atlas Grade datasheet 630 rev May 2008 July 2010

Grade Data Sheet 630 (17-4PH) Revised January 2008 Page 1 of 2 atlassteels.au Grade 630 martensitic precipitation hardening stainless steel has a combination of high hardness and strength after suitable heat treatment. It also has similar corrosion and heat resistance to Grade 304. The terms "Type 630" and "17-4PH" refer to the same grade.

JIS G4305 630, SUS 630, SS 630 Plate, TP630-SA240 316L ...

JIS G4305 630, SUS 630, SS 630 Plate, TP630 . Unitedsteel Stainless Factory is the large manufacturer to supply JIS G4305 630, SUS630,SS 630 Stainless plate,SUS 630 ASTM, ASME, JIS , EN, UNS Stainless plate and sheet. We have about 3000tons each thickness and size stainless plates …

Sus 630 Plate, Sus 630 Plate Suppliers and Manufacturers ...

Alibaba offers 218 sus 630 plate products. About 34% of these are stainless steel sheets, 3% are steel sheets. A wide variety of sus 630 plate options are available to you, such as aisi, astm, and jis.

SUS630 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SUS630 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Stainless Steel Sus 630, Stainless Steel Sus 630 Suppliers ...

Alibaba offers 439 stainless steel sus 630 products. About 18% of these are stainless steel sheets, 7% are stainless steel pipes, and 1% are stainless steel wire. A wide variety of stainless steel sus 630 options are available to you, such as astm, aisi, and jis.

Japan JIS SUS 630, Precipitation-Hardening steel, G 4305 ...

This page cover the Mechanical Properties, Chemical Element, Cross Reference of Japan JIS SUS 630 steel grade, Application Cold-rolled stainless steel plate, sheet and strip, Related specifications G …

SUS 630 Precipitation Hardening Stainless Steel - JIS G4303

SUS 630 grade has got a high resistance to stainless steel as compare to SUS 304 Stainless Steel Austenite Grades. They show advance resistance to stress corrosion cracking, if aged at five hundred and fifty degree Celsius or more. But, SUS 630 steels offer reduced resistant to Condition A solution treated, and therefore these steels, also with ...

630 Stainless Steel

Stainless Steel - Grade 630 - AZoM. Nov 7, 2001 Grade 630 stainless steels are martensitic stainless steels that are These steel achieve high strength and hardness following heat treatment.

China Stainless Steel Plate SUS 630, En 1.4546 Stainless ...

China Stainless Steel Plate SUS 630, En 1.4546 Stainless Steel Supplier in Stock, Find details about China Stainless Steel Coil SUS 630, Stainless Steel Plate SUS 630 from Stainless Steel Plate SUS 630, En 1.4546 Stainless Steel Supplier in Stock - Tianjin Yitejia Steel Sales Co., Ltd.

sus 630 stainless steel plate, View sus 630 stainless ...

sus 630 stainless steel plate, US $ 1 - 5 / Kilogram, 600 Series, ASTM, AISI, DIN, EN, GB, JIS, 2m,2.44m,3m,5.8m,6m etc.Source from Tianjin Tiangang Weiye Steel Tube Co., Ltd. on Alibaba. ... 630. Type: Plate. Application: Boiler Heat Exchange Food and Machenical Industries ECT. ... stainless steel 347h plate sus sheet 1.4301 sus304 ...

SUS 630 Stainless Steel round bar - lhtg.en.alibaba

SUS 630 Stainless Steel round bar, US $ 3,500 - 4,800 / Ton, AISI, ASTM, DIN, EN, GB, JIS, Other, Sichuan, China (Mainland).Source from Jiangyou Longhai Special Steel Co., Ltd. on Alibaba. ... Production flow sheet for stainless steel bar Production flow sheet for forged bar and forgings ...[PDF]

North American Stainless

North American Stainless . Long Products Stainless Steel Grade Sheet . AISI 630 . UNS S17400 . EN 1.4542 . INTRODUCTION . Type 630is commonly referred to as 17 4 and is a precipitation- …

sus631 steel - Carbon steel,Alloy steel,Spring steel ...

630 (17-4) Precipitation Hardening Stainless Steel Bar ... 630 is a 17-4 PH martensitic precipitation hardening stainless steel with a unique combination of high strength and good corrosive resistance. ASTM SUS 631 Stainless Steel sheet. SUS631,JIS G4304 SUS 631|SUS631 Stainless Steel - …

17-4 Stainless Steel | 630 Alloy - Specialty Steel Supply

17-4 Precipitation Hardening also known as Type 630 is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees …

630 (17-4) Precipitation Hardening Stainless Steel Bar ...

630 (17-4) Precipitation Hardening Stainless Steel Bar 630 is a 17-4 PH martensitic precipitation hardening stainless steel with a unique combination of high strength and good corrosive resistance. Supplied in either the H1075 (H580) aged condition with a tensile strength of 1000 Mpa minimum (HB 311 min.), or the H1150 (H620) double aged ...

Sus630 stainless steel bar Manufacturers & Suppliers ...

sus630 stainless steel bar manufacturer/supplier, China sus630 stainless steel bar manufacturer & factory list, find qualified Chinese sus630 stainless steel bar manufacturers, suppliers, factories, exporters & wholesalers quickly on Made-in-China.

Alloy 17-4 PH Precipitation Hardening - Sandmeyer Steel

Sandmeyer Steel Company stocks a large inventory of 17-4PH stainless steel plate ready to be processed and shipped your specific requirements. Sandmeyer Steel Company stocks a large inventory of 17-4PH stainless steel plate ready to be processed and shipped your specific requirements. ... Alloy 17-4PH (UNS S17400), Type 630, is a chromium ...

sus 630 steel - carbon-steeltube

stainless steel - 630 / 17-4ph related specifications: germany w.nr 1.4542 x5crnicunb17-4 japan jis g4303 sus 630 usa aisi 630 astm a564-630 uns s17400 description: Stainless Steel - Grade 630 - AZoM Grade 630 stainless steels are martensitic stainless steels that are precipitation hardened to achieve excellent mechanical properties.[PDF]

STAINLESS STEEL - 630 / 17-4PH

STAINLESS STEEL - 630 / 17-4PH RELATED SPECIFICATIONS: Germany W.Nr 1.4542 X5CrNiCuNb17-4 Japan JIS G4303 SUS 630 USA AISI 630 ASTM A564-630 UNS S17400 DESCRIPTION: 630 is a martensitic precipitation hardening, chromium, nickel, copper stainless steel. The steel …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.