Tel: +86-371-86151827

a633 gr e steel data sheet

Steel grade:a633 gr e steel data sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a633 gr e steel data sheet Introduction

[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, ... Thickness, width, and length tolerances for A633 Grade E steel plate are in accordance with the requirements of ASTM A6. The flatness tolerance for as supplied product is ½ ASTM A6. ... ASTM A633 Gr E data sheet 2012 04 01.docx

ASTM A633 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A633. The ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness.

ASTM A633 Grade E steel sheet data sheet - braunjp

Data Sheet 1 ASTM A633 Grade E - SSAB. Heat-Treated (Normalized) Structural Steel Product Data Sheet 2012 04 01 Page | 1 ssab ASTM A633 Grade E Normalized High-Strength Low-Alloy Structural Steel. ASTM A633 gr A,A633 gr C,A633 gr D steel for fine-grain ... ASTM A633 gr A,A633 gr C,A633 gr D steel for fine-grain structural can be offered by ...

A633 Gr.E steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A633 Gr.E can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Application of ASTM A633 Grade E steel plates steel plate ...

ASTM A633 Grade E steel plates belong to normalized high strength low alloy structural steel for welded, riveted, or bolted construction. A633 Grade E steel plates are mainly used in oil, chemical, power station, boiler and other industries, for the production of reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell ...

ASTM A633 Gr A low alloy steel sheet equivalent - braunjp

ASTM A633 gr A,A633 gr C,A633 gr D steel for fine-grain structural can be offered by BEBON steel ,if you need ASTM A633 gr A,A633 gr C,A633 gr D steel for …[PDF] Data Sheet 1 ASTM A633 Grade E - SSAB. ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior ...

a633 steel equivalent - steelsheetplate

Data Sheet 1 ASTM A633 Grade E - SSAB. ... A633 Gr.D - Steel grades, Properties and Global Standards. This page provides A633 Gr.D datasheet download, these include A633 Gr.D mechanical properties, chemical element A633 Gr.D, technical specifications of A633 Gr.D steel material properties. A633 Gr.D performance specifications.

BBN Steel Supply sa633 grade e data sheet,A36,A283 Grade …

[PDF] Data Sheet 1 ASTM A633 Grade E - SSAB. ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures.

a633 - steel grade steel material - shelter-partners.org

Data Sheet 1 ASTM A633 Grade E - SSAB. ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. ... Universal Steel stock A633 Gr. C from ¼” to 4” thick. A633 is provided in the normalized condition ...

BBN Steel Supply astm a633 gr d steel data sheet,A36,A283 ...

A steel plate/sheet mechanical property, A 572 Gr. 42 steel plate/sheet price. ASTM A633 Gr A low alloy steel sheet equivalent - braunjp. ASTM A633 gr A,A633 gr C,A633 gr D steel for fine-grain structural can be offered by BEBON steel ,if you need ASTM A633 gr A,A633 gr C,A633 gr D steel for …[PDF] Data Sheet 1 ASTM A633 Grade E - SSAB.

ASTM A633 Grade D high strength low alloy steel plate ...

ASTM A633 Grade D high strength low alloy steel plates are main products of BBN steel. The manufacturing process of ASTM A633 Grade D high strength low alloy steel plate is: raw material inspection -raw material pickling - raw material cutting-raw material heating-perforation process-rolling-heat treatment- A633 Gr.D property checking-inspection- A633 Gr.D steel packing.

SA633 Gr.D steel coil data sheet-Bebon Steel top steel ...

SA633 Gr.D steel coil data sheet: SA633 Gr.D steel coil data sheet also can be called as alloy structural steel. Alloy steel means this kind of grade contains some special alloy composition. Alloy steel plate application is very wide, as : Machine, pressure vessel, construction and so on .

a633 - steel grade steel material - shelter-partners.org

Data Sheet 1 ASTM A633 Grade E - SSAB. ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. ... Universal Steel stock A633 Gr. C from ¼” to 4” thick. A633 is provided in the normalized condition ...

Professional ASTM A633 GR E alloy steel plate

Professional ASTM A633 GR E alloy steel plate. Professional ASTM A633 GR E alloy steel plate. We are mainly engaged in R&D and production of steel product and steel machining,the Professional ASTM A633 GR E alloy steel plate and services have covered in more than 100 countries around the world,provide the steel procurement One-Stop solutions ...

ASTM A633 Gr C low alloy steel sheet ... - braunjp

ASTM A633 Gr E Data Sheet 2012 04 01 | Structural Steel ... Apr 01, 2012· ASTM A633 Gr E Data Sheet 2012 04 01 - Download as PDF File (.pdf), Text File (.txt) or read online. Material A633 ... Normalized High-Strength Low-Alloy Structural Steel ... Charpy V-Notch Impact Toughness requirements are not included in the basic specification, but ...

A633 Alloy Steel Sheet - gmatindia.in

[PDF] Data Sheet 1 ASTM A633 Grade E - SSAB. ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures.

astm a633 steel properties steel supplier katalor

Steel sheet SKD11 plate; ASTM A633 Gr A low alloy heat ... Pressure vessel steel of P690QH ...2017-11-6. E 24 grade steel plate_steelmaterial. Basic properties· A514 Steel Plate ... Data Sheet 1 ASTM A633 Grade E - SSAB - SSAB Start page ... Steel Plate Supplier, Steel Plate Company, ...2017-11-3. equivalent astm material for s275jr | China …

A633 Gr.E Valve,A633 Gr.E flanges,A633 Gr.E Pipe Fitting ...

A633 Gr.E angle bars, A633 Gr.E flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control A633 Gr.E chemical composition and A633 Gr.E mechanical properties.

ASTM A633 Marine & OffShore Steel Plate | BBN Steel

A633 is a normalized high-strength low-alloy structural steel plate. It is suited for service at low ambient temperatures of —50°F or higher where notch toughness better than expected is desired.

astm a633 steel plate sheet - srilankasports.org

Data Sheet 1 ASTM A633 Grade E . ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures.

A633 Gr.A - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A633 Gr.A can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

ASTM A633 HSLA Steel Grade D, Thickness 65 mm (2.5 in.)

They can be considered to be microalloyed steel and are designed for mechanical rather than compositional specs. ASTM A633 is ... ASTM A633 HSLA Steel Grade D, Thickness ; 65 mm (2.5 in.) ... This page displays only the text of a material data sheet.

A633 gr C material equivalent ASTM - Mild Cold Rolled ...

Shear burrs and heat-affected zones of thermal cut edges on or near the bend axis as well as sharp corners ASTM A633 Gr E data sheet 2012 04 01.docx. ASTM A633 Marine & OffShore Steel Plate | BBN Steel. BBN Steel's A633 is a normalized high-strength low-alloy structural steel plate. Marine & OffShore Steel Plate. ASTM A633.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.