Tel: +86-371-86151827

305 stainless steel plate

Steel grade:305 stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

305 stainless steel plate Introduction

[PDF]

305 STAINLESS STEEL - aksteel

Type 305 is an austenitic chromium-nickel stainless steel that can be spun and deep drawn more easily due to an increased nickel content that decreases work hardening. It is nonmagnetic and cannot be hardened by heat treatment. Typical uses include appliances, kitchen utensils, tank covers and other deep drawn parts. DATA SHEET 305 STAINLESS STEEL[PDF]

Stainless 302, 304, 304L, 305 - Specialty Stainless Steel ...

Minimum mechanical properties for annealed Types 302, 304, 304L, and 305 austenitic stainless steel plate, sheet and strip as required by ASTM specifications A 240 and …

305 Stainless Steel Strip - 305 SS | Precision Steel ...

precisionsteel› Stainless SteelType 305 stainless steel is widely used for the production of parts by free spinning and cold heading operations, and it is particularly suitable for severe cold drawing, especially where the part can be completely formed in two draws.

304 Stainless Steel Plate | Midwest Steel & Aluminum

304 Stainless Steel Plate. 304 Stainless Plate, the most widely used of the stainless and heat resisting steels. 304 stainless plate offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments Typical specifications for 304 Plate and 304L Stainless Steel Plate are ASTM A-240, ASME SA -240 and A666.

305 Stainless Steel - NKS

Description: Type 305 Stainless Steel is an austenitic chromium nickel stainless steel that can be cold worked and deep drawn more readably than Type 302 and Type 304 due to an increased nickel content that decreases the work hardening rate of the material. It is nonmagnetic and cannot be hardened by thermal treatment. Product Forms: Sheet, Strip ...

305 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 305 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

A240 SS305,ASTM A240 305 (S30500) stainless steel plate ...

ASTM A240 305 (S30500) stainless steel plate ASTM A240 standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications

MetalsDepot® - 304 Stainless Plate | Buy Stainless Plate ...

304 Stainless Steel Plate, is the most popular and economical of the stainless steels. 304 Stainless Plate offers good corrosion resistance to many chemicals as well as industrial atmospheres and marine environments. 304 Stainless Plate may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning ...

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Penn Stainless Products is a supplier and processer of stainless steel plate in over 30 grades, including 304/L,316/L,309/S, 310/S, duplex, 330 and many more.

Discount Steel – 304 Stainless Steel Sheet and Plate – Buy ...

Buy Metal Online – 304 Stainless Steel Sheet and Plate – Order Large or Small Quantity Online – Cut to Size Stainless Sheet and Plate – No Minimum Order

305 Stainless Steel UNS 30500 | Ulbrich

Description

305 Stainless Steel, annealed, plate - matweb

305 Stainless Steel, annealed, plate Categories: Metal; Ferrous Metal; Heat Resisting; Stainless Steel; T 300 Series Stainless Steel. Material Notes: Same corrosion resistance and Type 302, but much lower rate of work hardening. Excellent cold formability, good free spinning and cold heading properties, recommended for severe cold drawing.

305 Stainless Steel, annealed, plate - matweb

305 Stainless Steel, annealed, plate Categories: Metal; Ferrous Metal; Heat Resisting; Stainless Steel; T 300 Series Stainless Steel. Material Notes: Same corrosion resistance and Type 302, but much lower rate of work hardening. Excellent cold formability, good free spinning and cold heading properties, recommended for severe cold drawing.

Stainless Steel Type 305 - Rolled Metal Products

Rolled Metal Products is one of the steel industry’s most respected service centers with facilities across North America. We stock Stainless Steel, Nickel Alloys, Aluminum and other Specialty Metals in coil form and also offer toll processing of various metals including: Stainless Steel, Nickel Alloys, Titanium, Aluminum, Brass, Copper, Carbon Steel, and other Specialty Metals.

305 Stainless Steel Sheet Price Per Kg, Wholesale ...

Looking for affordable 305 stainless steel sheet price per kg? 36 low price 305 stainless steel sheet kg products from 36 trustworthy 305 stainless steel sheet kg suppliers on Alibaba. Reach out to suppliers directly and ask for the lowest price, discount, and small shipping fees.[PDF]

305 Stainless Steel, UNS S30500 - Ulbrich

305 Stainless Steel, UNS S30500 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire AMS 5514, ASTM A240, QQ-S-766 305 Alloy Description Alloy 305 Stainless Steel is an austenitic chromium nickel stainless steel with a low rate of work hardening. The alloy is non-magnetic

ASTM A959 305 (S30500) stainless steel plate__Steel Supplier

ASTM A959 305 (S30500) stainless steel plate. ASTM A959 standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. Gangsteel is specialized in supplying ASTM A959 steel plate in A959 305. Our BBN Steel have min 600Tons stock size for each size stainless ...[PDF]

Brown Metals Company Alloy ... - Stainless Steel Sheet

Alloy Technical Data Sheet Types 302 (S30200), 304 (S30400), 304L (S30403), 305 (S30500) Stainless Steels GENERAL PROPERTIES Types 302, 304, 304L, and 305 stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family.

305 Stainless Steel, 305 Stainless Steel ... - Alibaba

Alibaba offers 9,183 305 stainless steel products. About 6% of these are stainless steel sheets, 5% are stainless steel pipes, and 4% are stainless steel bars. A wide variety of 305 stainless steel options are available to you, such as astm, jis.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

Alloy 2205 Duplex Stainless Steel Plate - Sandmeyer Steel

Alloy 2205 (UNS S32305/S31803) is a 22% chromium, 3% molybdenum, 5-6% nickel, nitrogen alloyed duplex stainless steel plate with high general, localized, and stress corrosion resistance properties in addition to high strength and excellent impact toughness.

305 steel in Turkey - MS Plates - napmr.org

Stainless Steel Bars 305 Wholesale, Stainless Steel . There are 1,013 stainless steel bars 305 suppliers, mainly located in Asia. The top supplying countries are China (Mainland), India, and Turkey, which supply 99%, 1%, and 1% of stainless steel bars 305 respectively.[PDF]

MATERIAL SAFETY DATA SHEET Stainless Steel (301, …

MATERIAL SAFETY DATA SHEET Zapp – Stainless Steel (301, 302, 304, 304L, 305, 309, 310, 310S, 316, 316L, 321, 347, 350, 430, 17-7PH, 18SR) Version Date: January 25, 2011 Page 3 of 8 4. FIRST - AID MEASURES First Aid – Skin Seek medical help for serious cuts or lacerations or if irritation from contact with dusts persists.

305 steel in Slovakia - MS Plates - napmr.org

305 steel in Slovakia, steel,Hot sell 305 steel in Slovakia, MS Plates stock in China,China 305 steel in Slovakia, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled 305 steel in Slovakia, MS Plates in stock each month.

305 Stainless Steel, annealed, wire - MatWeb

Property Data; This page displays only the text of a material data sheet. To see MatWeb's complete data sheet for this material (including material property data, metal compositions, material suppliers, etc), please click the button below.

Raw Material Stainless Steel Plate – Hollinbrow Precision ...

Stainless Steel Plate Standard Sizes or Cut to Size. Stainless Steel Plate. Standard Sizes or Cut to you Requirement. ... Types 302, 304, 304L, and 305 stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.