Tel: +86-371-86151827

standard stainless steel shim plate for structural building

Steel grade:standard stainless steel shim plate for structural building

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

standard stainless steel shim plate for structural building Introduction

[PDF]

Modern Steel Construction steel questions or comments …

For a single-story steel moment frame building with CMU non-load-bearing walls, what requirements control ... Steel shim packs approximately 4 in. wide are set at the four edges of the base plate. The areas of the shim stacks are ... structural steel design or construction, Modern Steel Construction’s

Getting the Most Out of Slotted Steel Shim Packs

For the record, a flat shim with no slots is referred to as a shim plate. In structural steel erecting, the steel shim often requires a slot to fit around a bolt. These are referred to as slotted shims. If the steel shim is a single piece with more than one slot, it is called a multiple slotted shim. Examples of both a shim plate and a steel ...

Steel Standards - ASTM International

The steels can be of the carbon, structural, stainless, ferritic, austenitic, and alloy types. These steel standards are helpful in guiding metallurgical laboratories and refineries, product manufacturers, and other end-users of steel and its variants in their proper processing and application procedures to ensure quality towards safe use.

Shims – Steel vs. Plastic

We have isolated a stock shim below for the purposes of this review. Whether stock or made to order, The Steel Supply company can provide any shim required for you project in either carbon steel, stainless steel, aluminum or plastic. The data below is taken from a standard A-36 Coil Steel Mill Certification; Tensile Strength - 58,000 psi[PDF]

ASCE Design Standard for Stainless Steel Structures

ASCE DESIGN STANDARD FOR STAINLESS STEEL STRUCTURES by Shin-Hua Lin1, Wei-Wen Yu2, and Theodore V. Galambos3 I. INTRODUCTION Cold-formed stainless steel sections have gained increasing use in architectural and structural applications in recent years due to their

Standard Thickness of Steel Plate - stainless steel sheets ...

Steel Plates - Size & WeightSize & weight of steel plates - thickness ranging 3/16 - 10 inches - metric units. ... Filter for standard steel, galvanized steel, stainless steel, zinc, or birmingham (or gage) sizes are numbers that indicate the thickness of a piece of sheet metal, ... 304 Stainless Steel Shim Stock. Stainless Steel Railing Systems.

Steel Structural Shapes - Industrial Metal Supply

There are a variety of products that fall into the “steel structural shape” category, and numerous uses for each different shape. Industrial Metal Supply offers a full line of durable, long-lasting, and versatile steel structural shapes, including steel channel, steel angle, steel beams, and steel tees.[PDF]

SPECIFICATIONS FOR ERECTION OF STRUCTURAL STEEL

SPECIFICATIONS FOR ERECTION OF STRUCTURAL STEEL 1.0 DESCRIPTION ... The stainless steel surface of the bearings, the Teflon coated bearing ... bearings shall be set accurately on galvanized steel shims, and grouted as detailed on the Drawings, after the girder erection has been completed. The shims must be located so that a[PDF]

AISI STANDARD - steel.org

Steel Framing Alliance and the Canadian Sheet Steel Building Institute. iv AISI S220-11 ... Canada (NBCC), shall be considered structural members. This standard does not preclude the use of other materials, assemblies, structures, or ... blanks sheared from sheets or cut length of coils or plates, or by (2) continuous roll forming

Standard Thickness of Steel Plate - stainless steel sheets ...

Steel Plates - Size & WeightSize & weight of steel plates - thickness ranging 3/16 - 10 inches - metric units. ... Filter for standard steel, galvanized steel, stainless steel, zinc, or birmingham (or gage) sizes are numbers that indicate the thickness of a piece of sheet metal, ... 304 Stainless Steel Shim Stock. Stainless Steel Railing Systems.[PDF]

ASCE Design Standard for Stainless Steel Structures

ASCE DESIGN STANDARD FOR STAINLESS STEEL STRUCTURES by Shin-Hua Lin1, Wei-Wen Yu2, and Theodore V. Galambos3 I. INTRODUCTION Cold-formed stainless steel sections have gained increasing use in architectural and structural applications in recent years due to their[PDF]

STRUCTURAL STEEL TERMS/ LAYOUT AND …

STRUCTURAL STEEL TERMS/ LAYOUT AND FABRICATION OF STEEL AND PIPE ... structural members made up of standard structural ... Steel PLATE is a structural shape whose cross

Stainless Steel Sheet & Plate | Stainless Steel | Sheet ...

304 Stainless Steel Sheet & Plate Stainless steel sheet and plate 304 is the ideal choice due to its tensile strength, high resistance to rust, and high fabrication ability. Cost-effective and versatile material, 304 sheet is suitable for most applications where durable support and corrosion resistance are required.[PDF]

SPECIFICATIONS FOR ERECTION OF STRUCTURAL STEEL

SPECIFICATIONS FOR ERECTION OF STRUCTURAL STEEL 1.0 DESCRIPTION ... The stainless steel surface of the bearings, the Teflon coated bearing ... bearings shall be set accurately on galvanized steel shims, and grouted as detailed on the Drawings, after the girder erection has been completed. The shims must be located so that a

Stainless Steel Custom Shims - American Metals Co.

Stainless steels are engineering materials with good corrosion resistance, strength, and fabrication characteristics. American Metals stock many thicknesses of the standard grades of stainless steel, please contact us for a custom quote of your shims requirements.

Stainless Steel Structural Products | Stainless Structural ...

The structural chemical composition, size and shape of structural products are regulated in most industrialized countries. Products like stainless steel beams, sometimes referred to as I-beams, channels and angles are used as main building components to strengthen the structure while offering a high resistance to corrosion.[PDF]

Structural Design of Stainless Steel

Since there is no British Standard for designing structural stainless steel, this guide is based on the new version of BS 5950-1, Code of Practice for design in simple and continuous construction, published by BSI in 2000. The guidance provided is an extension of the code as appropriate to the design of stainless steel structures. Where the

Stainless Sheet, Plate, Bar, Structural, Pipe & Tubes ...

Penn Stainless Products is a full line supplier and processer of stainless steel sheet, plate, bar, structural, pipe and tubular products. We stock over 30 grades of stainless steel, including 300 and 400 series stainless, duplex steels, 17-4PH, and high temperature grades, for shipments worldwide.

Shim Stock - Online Metal Store

Aluminum Shim Stock Blue Tempered Shim Stock Brass Shim Stock Brass Shim Stock (metric) Copper Shim Stock Nickel Shim Stock Plastic Shim Stock Stainless Shim Stock Stainless Shim Stock (metric) Steel Shim Stock Steel Shim Stock (metric)

Steel Plate Shims | Products & Suppliers | Engineering360

globalspec› PRODUCTS & SERVICESFind Steel Plate Shims related suppliers, manufacturers, products and specifications on GlobalSpec - a trusted source of Steel Plate Shims information. ... Interaction between cladding and structural frame observed in a full‐scale steel building test. ... As the mechanical stiffness of the PVF2 thin lamina is much smaller than that of a ...

Structural Stainless Steel in Houston TX | Steel Supply, L.P.

We stock a large selection of structural stainless steel pipe, angels, beams, channels and more at our two locations in Houston, TX.

Stainless steel beams: sizes and ... - Stainless Structurals

We produce and distribute hot rolled and laser fused stainless steel beams throughout the world in both imperial and metric sizes. Please select the catalog for your region below to view a list of available standard size beams.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.