Tel: +86-371-86151827

thermal conductivity of steel sheet

Steel grade:thermal conductivity of steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: []

thermal conductivity of steel sheet Introduction

Thermal Properties of Metals, Conductivity, Thermal ...

31 rows· Engineering Thermal Properties of Metals, Conductivity, Thermal Expansion, Specific Heat Data - Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming under stress without cleaving.MATERIALTHERMAL CONDUCTIVITY BTU / (…DENSITY (LBS/IN3)SPECIFIC HEAT (BTU…Aluminum1360.0980.24Brass (Yellow)69.330.3060.096Copper2310.3220.095Gold1830.6980.032See all 31 rows on engineersedge

Thermal Conductivity of common Materials and Gases

Thermal conductivity is a material property that describes ability to conduct heat.Thermal conductivity can be defined as "the quantity of heat transmitted through a unit thickness of a material - in a direction normal to a surface of unit area - due to a unit temperature gradient under steady state conditions"Conductive Heat Transfer · Ceramic Materials Properties · Thermal Conductivity of Metals · Plastics

Sheet Metal Thermal Conductivity | Products & Suppliers ...

globalspec› PRODUCTS & SERVICESDescription: 1.1 This practice is intended to determine the thermal conductivity of a sheet material. This practice is not limited to leather, but may be used for any poorly conductive material such as rubber, textile and cork associated with the construction of shoes. 1.2 A constant heat

Aluminum Vs. Steel Conductivity | Sciencing

Conductivity in Stainless Steel. Stainless steel has a much lower conductivity than carbon steel: a thermal conductivity of about 15 watts per kelvin per meter, and an electrical conductivity (at room temperature) of about 1.4 million siemens per meter.

Solved: The Thermal Conductivity Of A Sheet Of Rigid Insul ...

The thermal conductivity of a sheet of rigid insulation is reported to be 0.029 W/mK. The temperature difference across a 20 mm thick sheet of insulation is 10?C. (a) What is the heat flux through a 2m x 2m sheet of this insulation (in W/m 2)? (b) What is the total rate of heat transfer through the sheet (in W)?[PDF]

Galvanized Steel Stainless Steel - Thermally Broken Steel …

Steel sheet, plate, and strip for general purposes EN 10088 - (1) Stainless Steel - Material Standard for Stainless Steel semi-finished products, bars, rods, and sections for ... Thermal Conductivity at 20⁰ C (W/m⁰K) 60.0000 Specific Heat Capacity at 20⁰ C (cal/g) 0.0900

Thermal Conductivity Of Galvanized Steel Sheet, Thermal ...

And whether thermal conductivity of galvanized steel sheet is steel plate, or steel coil. There are 185 thermal conductivity of galvanized steel sheet suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of thermal conductivity of galvanized steel sheet respectively.

thermal conductivity galvanized steel pipe

Metals in general have high electrical conductivity, high thermal conductivity, and Sheets of metal beyond a few micrometres in thickness appear opaque, but . Thermal Conductivity - HyperPhysics. Thermal Conductivity. Material, Thermal conductivity (cal/sec)/(cm2 C/cm).Thermal conductivity (W/m K)* 79.5. Steel 50.2. Lead. 0.083. 34.7. Mercury 8.3.

Stainless Steel Thermal Conductivity

A description of the properties of 410 Stainless Steel. Thermal conductivity is improved and thermal expansion reduced relative to austentic stainless grades. SS 304 Seamless Pipe | 304 Stainless Steel Welded Pipe. Jain Steel Corporation is popular in the sector of premium quality stainless steel 304 pipe manufacturing, dealing and supplying.

What is the thermal conductivity of galvanized sheet?

answers› Categories› Science› ChemistryThe thermal conductivity of galvanized steel is 17 to 19 Wm-1K-1.Galvanized steel sheet is frequently used in refrigerators, washingmachines, microwaves, and ventilating ducts.[PDF]

Galvanized Steel Stainless Steel - Thermally Broken Steel …

Steel sheet, plate, and strip for general purposes EN 10088 - (1) Stainless Steel - Material Standard for Stainless Steel semi-finished products, bars, rods, and sections for ... Thermal Conductivity at 20⁰ C (W/m⁰K) 60.0000 Specific Heat Capacity at 20⁰ C (cal/g) 0.0900

Which Metals Conduct Heat Best? | Metal Supermarkets ...

Which metals conduct heat best. As you can see, out of the more common metals, copper and aluminum have the highest thermal conductivity while steel and bronze have the lowest. Heat conductivity is a very important property when deciding which metal to use for a specific application. As copper is an excellent conductor of heat,...

galvanized steel thermal conductivity datasheet ...

galvanized steel thermal conductivity datasheet, cross reference, circuit and application notes in pdf format. The Datasheet Archive. Search. Browse by Manufacturer Get instant insight into any electronic component. Try Findchips PRO for galvanized steel thermal conductivity. Top Results (6) Part ...

thermal conductivity of steel sheet - alibaba

Alibaba offers 244 thermal conductivity of steel sheet products. About 1% of these are other analysis instruments, 1% are insulation materials & elements, and 1% are ph meters. A wide variety of thermal conductivity of steel sheet options are available to you, such as free samples.[PDF]

Specification Sheet: Alloy 347/347H - Sandmeyer Steel

The alloy has good oxidation resistance and creep strength to 1500°F (816°C). It also possesses good low temperature toughness. Alloy 347H (UNS S3409) is the higher carbon (0.04 – 0.10) version of the alloy. It was developed for enhanced creep resistance and …

Thermal conductive sheet|Dexerials

Thermal conductive sheet Carbon fiber type. EX10000F7 series / EX20000C7 series / EX20000C4S series; This thermal conductive sheet has an extremely high thermal conductivity in the direction perpendicular to the sheet plane and is best for heat dissipation of devices that have a high heat generation density such as LSIs.

Thermal Conductivity | Ask The Experts Forum | Metal ...

May 24, 2015· Thermal Conductivity. I suppose that the material used in roof products is not pure steel and that the coatings may also have an influence in the conductivity. The conductivity of the metal layer is usually not significant when there is a layer of thermal insulation (polystyrene, polyurethane, etc), but is not the same for cases with no insulation.[PDF]

321 STAINLESS STEEL - clevelandmetal

Type 321 is a stabilized austenitic stainless steel similar to Type 304 but with a titanium addition of at least five times the carbon content. This titanium addition reduces or prevents carbide precipitation during welding and in 800 – 1500 °F (427 – 816 °C) service. It also improves the elevated temperature properties of the alloy.

List of thermal conductivities - Wikipedia

Very high thermal conductivity measurements up to 22,600 w m-1 K-1 were reported by Fenton, E.W., Rogers, J.S. and Woods, S.D. in some journal of Physics which has its name blurred up in reference 570 on page 1458, 41, 2026-33, 1963. The data is listed on pages 6 through 8 and graphed on page 1 where Fenton and company are on curves 63 and 64.Sortable List·

thermal conductivity of galvanized steel sheet, View ...

1) thermal conductivity of galvanized steel sheet is manufactured to have a long durability, strong corrosion resistance and shiny surface. 2) thermal conductivity of galvanized steel sheet features excellent forming properties, paintability, weldability, and …[PDF]

Prediction of thermal conductivity of steel - Harry …

The thermal conductivity of steel alloys diverge as temperature is decreased, pure iron having the highest thermal conductivity, followed by carbon steels, alloy steels and then by high–alloy steels. High–alloy steels having lower thermal conductivity at normal ambient temperatures than at high temperatures.

thermal conductivity aluminium- Aluminum/Al foil,plate ...

Thermal conductivity of gases, insulation products, aluminum, asphalt, brass, copper, steel and other common materials. Chat NowSend Inquiry. Aluminium - Wikipedia, the free encyclopedia Thermal conductivity: 237 W/(m·K) Electrical resistivity: 28.2 nΩ·m (at 20 °C) Magnetic ordering: ... Aluminium is a good thermal and electrical conductor, ...

Thermal Conductivity - HyperPhysics Concepts

Their calculation for freon filled polyurethane of density 1.99 lb/ft 3 at 20°C gives a thermal conductivity of 0.022 W/mK. The calculation for CO 2 filled polyurethane of density 2.00 lb/ft 3 gives 0.035 W/mK .

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
0.3-3.0 mm
coil or as per requirement.
coil or as per requirement.
No.1 or 1D
GB/T4237-2015 ASTM A240/A240M JIS G4304
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.


Please send your processing requirement/ the drawings to or leave a message below. Our professional after-sales personnel will response you in 24 hours.