Tel: +86-371-86151827

cold work tool steel d2 punch mold steel plate

Steel grade:cold work tool steel d2 punch mold steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold work tool steel d2 punch mold steel plate Introduction

D2 Tool Steel | 1.2379 | X153CrMo12 | Cr12MoV | SKD11

D2 Tool Steel | 1.2379 | X153CrMo12 | Cr12MoV | SKD11. SAE D2 tool steel is a high carbon (1.4-1.6% C), high chromium Cold tool steel (11-13% chrome), and with Very high wear resisting properties, heat treatment can be reached to 60-62 HRc. D2 steel have very wear resistant property but not as tough as lower alloy steel.

Cold Work Tool Steel - Otai Special Steel

ASTM A681, Cold Work Tool Steel, DIN EN ISO 4957, Hot Work Tool Steel, Plastic Mold Steel AISI S7 tool steel is a shock-resistant air hardening steel. AISI S7 steel has exceptional impact properties plus the highest hardenability of shock resisting grades of tool steel.

A-2, D-2, 0 Die, S-7 - Alloy Tool Steel Inc.

A-2 Tool Steel. A-2 is an air hardening (cold work) tool steel with wear properties between 0-1 oil hardening and 0-2 air hardening. A-2 offers good toughness with medium wear resistance along with relatively easy machining. A-2 also has excellent non-deforming properties. These characteristics have made A-2 a very popular and widely used material.

Tool Steel Products list | DAIDO STEEL

Tool steel is ranked among our major products and we have a wide variety of products for cold work tool steels, hot work tool steels, high-speed tool steels, and plastic mold steels.

Cold Work Tool Steel | DAIDO STEEL

Tool steel is ranked among our major products and we have a wide variety of products for cold work tool steels, hot work tool steels, high-speed tool steels, and plastic mold steels.

DF2 Steel | AISI O1 | 1.2510 | SKS3 | 9CrWMn Cold Work ...

Applications of DF2 steel material. DF2 steel is a typical alloy Tool steel, Its Cold work Mechanical Properties is very nice. DF2 steel with high abrasion resistance, micro deformation of cold work die steel, the wind hard tool steel, carbon content as high as …

ASTM A681, for Tool Steels Alloy - Otai Special Steel

P20 Steel Plate | 1.2311 | 3Cr2Mo | Plastic Mold Tool Steel. AISI D2 tool steel is a high carbon, high chromium tool steel (12% chrome) with extremely high wear resisting properties, heat treatable to 60-62 Rc. D2 is very wear resistant but not as tough as lower alloyed steels.[PDF]

General Catalog of TOOL STEELS - 日立金属株式会社

High-performance cold work tool steel attaining both extended die life and easy die fabrication. Cold work dies for high-tensile steels, SUS, mass production, and general use. Cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Cold work dies for general use, forming roll, shear ...

Cold Work Tool Steel - Tool Steel-High Speed Steel China ...

Cold Work Tool Steel. Cold work tool steel place extra emphasis on hardness, wear resistance. High carbon content, alloying elements to increase the hardenability and enhance the wear resistance. Cold work die steel including manufacturing blanking die, blanking punching die and trimming die, punch, scissors) die, cold heading and cold extrusion die,...

A2 Cold Work Tool Mold Steel Plate Aisi A2 Steel ,helical ...

Tool steels are those steels which are used to form, cut, shear and mold metals and other materials. Cold work tool steels (D2, D7, A2, O1, S7, S5) are used for roll . Tool Steels Associated Steel Corporation. D2 tool steel, O1 tool steel, A2 tool steel, H13 tool steel, S7 tool steel. 4330 alloy steel (modified). Decarb free.

A2 Cold Work Tool mold plate Steel Plate Aisi A2 Steel ...

Tool steels are those steels which are used to form, cut, shear and mold metals and other materials. Cold work tool steels (D2, D7, A2, O1, S7, S5) are used for roll . Tool Steels Associated Steel Corporation. D2 tool steel, O1 tool steel, A2 tool steel, H13 tool steel, S7 tool steel. 4330 alloy steel (modified). Decarb free.

A-2, D-2, 0 Die, S-7 - Alloy Tool Steel Inc.

A-2 Tool Steel. A-2 is an air hardening (cold work) tool steel with wear properties between 0-1 oil hardening and 0-2 air hardening. A-2 offers good toughness with medium wear resistance along with relatively easy machining. A-2 also has excellent non-deforming properties. These characteristics have made A-2 a very popular and widely used material.

DF2 Steel | AISI O1 | 1.2510 | SKS3 | 9CrWMn Cold Work ...

Applications of DF2 steel material. DF2 steel is a typical alloy Tool steel, Its Cold work Mechanical Properties is very nice. DF2 steel with high abrasion resistance, micro deformation of cold work die steel, the wind hard tool steel, carbon content as high as 0.95%, the …[PDF]

General Catalog of TOOL STEELS - 日立金属株式会社

Dies for printed circuit board, die plates, stripper plates. Cold work die steel with superior machinability for general use; Special care is required for quenching large-size dies or wire electric discharge machining. Dies for deep drawing, gauges. Carbon tool steel for small production to be quenched in oil.

Tool Steel | LescoWearl | LescoWear Technical Data

Lescowear™ Cold Work Tool Steel. Lescowear cold work tool steel is a versatile medium-chromium, air-hardening tool steel that is characterized by a very good combination of toughness and wear resistance. It is available primarily in round bar forms for cold work tooling applications which demand better toughness but comparable wear resistance compared to D2 cold work tool steel and M2 high ...

jis standard high speed tool steel punch die

DC53 steel is a new general purpose cold work die and mold steel whose strength and toughness approach those of high-speed steels. DC53 steel, is an improvement over alloy tool steel D2 specified in Standard (JIS) G4404. Learn more

Cr12 Steel-GB/T 1229 Cold Work Tool Steel Material ...

Its Cold work Mechanical Properties is very nice. Cr12 steel with high abrasion resistance, micro deformation of cold work die steel, the wind hard tool steel, carbon content as high as 1.5%, chromium content as high as 11.5%, the heat treatment hardness can …

China Tool Steel Plate D2/SKD11 GB Cr12MOV - China Steel ...

Steel Plate, Steel Sheet, SKD 11tool Steel Plate manufacturer / supplier in China, offering Tool Steel Plate D2/SKD11 GB Cr12MOV, Good Quality ASTM Standard 2017 Aluminium Alloy Coil, 3105 Blank Circle Plate for Cooking Ware Utensils and so on.

Cold Work Mold Steel, Cold Work Mold Steel Suppliers …

There are 2,557 cold work mold steel suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Taiwan, and United States, which supply 90%, 9%, and 1% of cold work mold steel respectively. Cold work mold steel products are most popular in Southeast Asia, North America, and Domestic Market.

Cold work steel - Shenzhen Haoyuan Special Steel Co., Ltd ...

China Cold work steel catalog of Cold Work Steel 1.2379 D2 Tool Steel Alloy Steel Bar, Steel Bar Cold Work Steel 1.2379 D2 Tool Steel Supplier provided by China manufacturer - Shenzhen Haoyuan Special Steel Co., Ltd., page1.

Distributor and Supplier of Tool Steel in India, Daido Steel.

We are the Best supplier of DHA-WORLD, DC53, NAK80, DCMX Products in India are finally here. We also provide Daido Steel in India. We are also Distributor and Supplier of Tool Steel in India.

Cold work steel, Hot work steel from China Manufacturers ...

China Cold work steel, Hot work steel, Plastic mold steel, offered by China manufacturer & supplier -Shenzhen Haoyuan Special Steel Co., Ltd., page1 ... Cold Work Steel 1.2379 D2 Tool Steel Alloy Steel Bar. FOB Price: US $800-2,500 / Ton. Min. Order: 5 Tons. ... Cold Work D3 1.2080 Tool Steel Plate Bar Alloy Steel Cold Work. FOB Price: US $800 ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.