Tel: +86-371-86151827

astm a517 grade q steel plate

Steel grade:astm a517 grade q steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a517 grade q steel plate Introduction

ASTM A517 Grade Q|A517 Gr.Q|A517GrQ|STEEL PLATE__Steel ...

ASTM A517 Steel Plates ASTM A517 Grade Q|A517 Gr.Q|A517GrQ|STEEL PLATE . ASTM A517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. The steel shall be killed and shall conform to the fine austenitic grain …

ASTM A517 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

ASTM A517 Grade Q,A517 Grade Q,A517 Grade Q,steel plate ...

A517 Grade Q steel plate A517 Grade Q is a high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels.

ASTM A517 Grade Q,A517GrQ steel plate--Xin Steel ...

Alloy structural steel plate A517 Grade Q is under American steel standard ASTM A 517/A 517M.Till now Xinsteel can offer the maximum thickness for high strength steel plate A517Gr.Q reaching to 350 millimeters with heat treatment of quenched and tempered.

ASTM A517/ A517M Grade Q Pressure Vessel Steel Plate

TJC Steel( owned by TJC Iron&Steel (Group) Co., Limited) is the most competitive manufacture and supplier of ASTM A517/ A517M Grade Q Pressure Vessel Steel Plate in China. For more details, please contact us freely. Click Here to See PDF Details for ASTM A517/ A517M Grade Q Pressure Vessel Steel Plate[PDF]

Plate - ArcelorMittal

Available Grades ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical ...

ASTM A517 Grade F|A517 Gr.F|A517GrF|STEEL PLATE__Steel ...

ASTM A517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. The steel shall be killed and shall conform to the fine austenitic grain size requirement of Specification A20/A20M.

A517 Grade A|B|E|F|H|P|Q|S quenched and tempered alloy ...

Adopt Standard: ASTM A 517/A517M Grade: SA517 Grade A | SA517 grade B | SA517 grade E | SA517 grade F | SA517 grade H | SA517 grade P | SA517 grade Q | SA517 grade S Application: SA517 specification covers high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The maximum thickness of plate: grade A and grade B 32mm, Grade …

Standard Specification for Pressure Vessel Plates, Alloy ...

A517 / A517M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered Charpy V-Notch impact test~ pressure vessels~ high-strength steel~ steel plates~

A514 Grade Q,ASTM ,A514 Grade Q steel plate …

Adopt Standard: ASTM A517 . steel grade: A514 GRA,A514 GRB,A514 GRC,A514 GRE,A514 GRF,A514 GRH,A514 GRJ,A514 GRK,A514 GRM,A514 GRP,A514 GRQ,A514 GR R,A514 GRS,A514 GRT,. A514 Grade Q is for high yield strength, quenched and tempered alloy steel plate of structural quality in thickness of 150mm and under intended primarily for use in welded bridges and other …

A517 Grade Q,A517GrQ,A517GrQ PLATE - Mild steel plate ...

Quenched and tempered alloy steel plate A517 Grade Q belongs to high yield and tensile strength steel plate.Rolling steel grade A517GrQ furnished under ASTM A517/A517M shall conform to the requirements of the current edition of specification A 20/A 20M,for the ordered materials of steel A517 Gr.Q,unless a conflict exists in which case this ...

ASTM A517 - EPC Steel and Processing Co., Ltd.

epcsteel› Steel Plate› Pressure Vessel Steel PlateASTM A517 steel plate is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and pressure vessels. ... ASTM A516 Grade 70. ASTM A516 Grade 70. June 11th, 2017. ASTM A387. ASTM A387. June 11th, 2017. ASTM A285. ASTM A285. June 11th, 2017. Search the keyword.

supplier of a517 grade q steel plate,A36,Q235B,Q345B steel ...

Plate - usa.arcelormittalArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical Applications

ASTM A517Gr.Q quenched and tempered steel plates supplier

Related keywords: ASTM A517Gr.Q, ASTM A517 Grade Q, ASTM A517GrQ, ASTM A517 Gr.Q. Adopt Standard: ASTM A517. A517 Grade Q steel plate A517 Grade Q is a high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The maximum thickness of plate,

ASTM A517 - SSAB

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

ASTM A514 Grade Q steel plate - tjganghua.en.alibaba

ASTM A514 grade Q alloy steel plate . Product Show. 1. Product Pictures of ASTM A514 GRQ alloy steel plate . 2. Product Description of ASTM A662 GRC alloy steel plate . Commodity. ASTM A662 GrC alloy steel plate. Grade. ASTM A662 GrA/GrB/GrC. ASTM A737 GrA/GrB/GrC steel. ASTM A36.

ASTM A514 Alloy & Abrasion Resistant Steel Plate | Chapel ...

Alloy & Abrasion Resistant Steel Plate. ASTM A514. ... ASTM A131 A&B / ABS A&B ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36 API 2H Grade 50 ASTM A633. PVQ Steel Plate . ASTM A516/ ASME SA516 ASTM A537/ ASME SA537 ASTM A283/ ASME SA283 ASTM A285/ ASME SA285. Armor & Ballistic Steel Plate .

ASTM-A514 - SSAB high-strength steel - sheet, plate, coil ...

Grades: A514 GR B, A514 GR H, A514 GR E, A514 GR F, A514 GR Q, A514 GR S. ASTM A514. The ASTM A514 specification is the Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding used in applications where Yield Strengths of ≥ 100 ksi are required for plates up to 2-1/2" thick, inclusive.

ASTM A514 Grade Q Steel Plate - Made-in-China

Tianjin TEDA Ganghua Trade Co., Ltd. ASTM A514, A514, A514 Grade Q manufacturer / supplier in China, offering ASTM A514 Grade Q Steel Plate, Bulk Micron Thickness Aluminum Foil, Micron Aluminum Foil and so on.

A514 steel - Wikipedia

A514 is a particular type of high strength steel, which is quenched and tempered alloy steel, with a yield strength of 100,000 psi (100 ksi or approximately 700 MPa).The ArcelorMittal trademarked name is T-1. A514 is primarily used as a structural steel for building construction. A517 is a closely related alloy that is used for the production of high-strength pressure vessels.Specifications· [PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;

Astm A517 Grade A Steel Plate, Astm A517 Grade A Steel ...

Alibaba offers 133 astm a517 grade a steel plate products. About 38% of these are steel sheets, 1% are stainless steel sheets. A wide variety of astm a517 grade a steel plate options are available to you, such as astm, aisi, and jis.

ASTM A514 / A514M - 18 Standard Specification for High ...

ASTM A514 / A514M-18, Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding, ASTM International, West Conshohocken, PA, 2018, astm…

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.