Tel: +86-371-86151827

flat 20 gauge cold reduced steel sheet mechanical

Steel grade:flat 20 gauge cold reduced steel sheet mechanical

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

flat 20 gauge cold reduced steel sheet mechanical Introduction

Sheet Metal Gauge Chart | Metal Supermarkets - Steel ...

When working with sheet metal, it is common for the term “gauge” to be used.Someone unfamiliar with the gauge system may not understand what is meant by 18 gauge steel, for example. To help, this blog will explain the gauge system and features a sheet metal gauge chart.Metals · What Is White Rust · Store Locator

Steel Cold Rolled Sheet 20 Gauge (Grade CQ - Commercial ...

Buy Small Quantities of Steel Cold Rolled Sheet 20 Gauge (Grade CQ - Commercial Quality) at the Allmetalsinc Online Metals Store. Toll Free 888.METAL17 [email protected] ... Commercial Quality (CQ) sheet and plates are made from low carbon steel and possess a matte finish. CQ sheets and plates are used in a variety of structural applications and can ...

.0359" (20 GA) COLD ROLL STEEL SHEET ASTM-A366/1008 ...

0.0359" (20 GA) A-366/1008 Cold Roll Sheet is commonly referred as the “commercial quality” of cold rolled steel sheets. It offers very good formability and comparatively high strength. Its surface finish makes it a better alternative to hot rolled steel. View our "Guide to Mild Steel" for available grades, shapes and additional information.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Extra-low-carbon Cold-Rolled Steel Sheets and Coils with excellent deep-drawing workability. Automobile oil pans, high roofs, extra deep drawn parts 2. Special-Purpose Cold-Rolled Steel Sheets and Coils Nippon Steel & Sumitomo Metal’s High-Strength Cold-Rolled Steel Sheets and Coils are classified into the following six

0.060" (16 GA) ASTM A1011 Hot Rolled STEEL SHEET - Online ...

Hot Rolled Steel Sheet A1011 (0.060" - 16 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization, it can resist corrosion well.

Steel Solutions | Hascall Steel Company

COLD ROLLED (CR) is hot rolled carbon steel that is reduced in gauge, annealed, and then temper passed to improve the surface and flatness. It then becomes a base metal for other steel types, or sold “as is”. ALUMINIZED (ALMZ) is hot or cold rolled carbon steel that is coated with an aluminum-silicon alloy by the hot-dip process.

20 Gauge Steel Thickness - stainless steel sheets ...

18-Gauge Vs. 20-Gauge Stainless Steel Sinks | eHow. Thickness. The fundamental difference between an 18-gauge stainless steel sink and a 20-gauge sink is the thickness of the steel used. With stainless steel…

Carbon Steel || Sheet Steel || Rolledsteel « Rolled ...

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.

Steel Sheet: Metals & Alloys | eBay

For DIYers who prefer an old-world charm for their homes, achieving an attractive country look is possible by cutting the centers out of kitchen cabinet doors and replacing the wood with glass or a perforated steel sheet, as rust-resistant steel is more durable than traditional punched tin is.

Cold Rolled Steel Sheet and Plat|AllMetalsInc

At AllMetalsInc, we have a wide variety of cold rolled steel sheet options. No matter what gauge you are looking for, we have it in stock and ready to ship. This selection of steel sheets and plates is cold rolled, meaning these products have improved surfaces, greater uniformity in thickness, and better mechanical properties than hot ...[PDF]

Cold Rolled Steel Sheet for Drawing and Forming EN …

Cold rolled steel sheet for drawing and forming applications is produced in a broad spectrum of grades ... Cold Rolled Steel Sheet for Drawing and Forming EN 10130 DC01 – DC06 . For further information, contact: ... When the thickness t is 0.5mm < t ≤ 0.7mm the minimum value for the elongation is reduced …

Steel Solutions | Hascall Steel Company

COLD ROLLED (CR) is hot rolled carbon steel that is reduced in gauge, annealed, and then temper passed to improve the surface and flatness. It then becomes a base metal for other steel types, or sold “as is”. ALUMINIZED (ALMZ) is hot or cold rolled carbon steel that is coated with an aluminum-silicon alloy by the hot-dip process.

Carbon Steel || Sheet Steel || Rolledsteel « Rolled ...

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.

20 Gauge 1008 Cold Rolled Steel Sheet (.0359")

035" x 12" x 24" 1008 Cold Rolled Steel Sheet 20 Ga $7.75.035" x 12" x 24"-Long 1008 Cold Rolled Steel Sheet 20 Gauge 1008 Cold Rolled Steel Sheet ASTM A 1008

ASTM A1008 Cold Rolled Sheet - Discount Steel

ASTM A1008 Cold Rolled Sheet – Order Large or Small Quantity Online – Cut to Size Cold Rolled Sheet – No Minimum Order ... ASTM A1008 (Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability and Solution Hardened) Alloy: Commercial Quality/1008 ...

Cold Roll - Online Metal Store

“Cold Roll” is the nickname for steel that is produced in the “cold rolling” method, processed at close to normal room temperatures. Cold Roll is limited to a few shapes but comes in many finishes and offers superior strength and machinability.

Coyote Steel & Co. | Eugene, Oregon

Sizes and products are for reference only. We do not carry or supply all sizes or items shown. Please contact us to inquire about product availability.[PDF]

FLAT ROLLED PRODUCTS - ussteel

20. SHEET PRODUCTS CLAIMS POLICY 24. TIN MILL PRODUCTS 27. TIN MILL PRODUCTS ETCS ... (“USS” or “U. S. Steel”) publication covers Flat Rolled Products produced in North America and shipped to any customer location. Included in this publication is our Claims Policy for both Sheet and Tin Mill products. ... Cold Rolled Sheet Steel Cold ...

Harvard Steel

Steel Sheet Designations. Commercial Steel – CS (Hot Rolled, Cold Rolled, and Galvanized) ... SAE J2340 High-Strength Low Alloy Required Mechanical Properties. SAE J2340 supersedes SAE J1392 ... This test can be helpful as an indicator of ductility but should be used as a reference only. Domestic steel producers of flat rolled products do not ...

MetalsDepot® - 1018 Cold Finished Steel Flat Bar

C1018 Cold Finished Flat, aka CRS Flat or Cold Roll Flat Bar is a steel product with closer dimensional accuracy, tolerances, and smoother surface finish than hot rolled bar.C1018 Cold Finish Flat is a general purpose low carbon steel with good case hardening qualities and is especially suited for cold …[PDF]

CHATHAMSTEELCORPORATION 25 HOT ROLLED …

CHATHAMSTEELCORPORATION 25 HOT ROLLED BLACK SHEETS COMMERCIALQUALITYA-569 Size(In.) Nom.Thickness WeightPerSheet ... COLD ROLLED BLACK SHEETS CLASSACOMMERCIALQUALITY Size(In.) Nom.Thickness WeightPerSheet ... of Per Thick.in. of Per Thick.in Gauge Square Fractions Gauge Square Fractions Foot ofaninch Foot ofaninch 7 7.5 3 ...

Steel Metal Sheets & Flat Stocks | eBay

ebay› …› Metals & Alloys› Metal Sheets & Flat StockSave on Steel Metal Sheets & Flat Stocks. Trending price is based on prices over last 90 days. ... CUT VERY NICELY WITH THE RIGHT TOOLS. STAINLESS, ALUM, COLD ROLLED, COPPER, BRONZE AND ZINC. NEED A DIFFERENT SIZE OR GAUGE 26, 24, 22, 20, 18 AND 16 JUST ASK. $6.05. Material: Steel. $6.95 shipping ... Steel Sheet Metal Cold Rolled18 gauge thick ...[PDF]

IS 513 (2008): Cold reduced low carbon steel sheets …

AMENDMENT NO. 1 JULY 2010 TO IS 513 : 2008 COLD REDUCED LOW CARBON STEEL SHEET AND STRIP ( Fifth Revision ) (Page 1, clause 3) ― Insert ‘CR0’, before ‘CR1’.(Page 1, clause 4.3) ― Substitute the following for the existing first para: ‘Sheets and strips of CR2, CR3, CR4 and CR5 grade shall be supplied in annealed and skin passed condition.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.