Tel: +86-371-86151827

ss304 2b finish surface stainless steel sheet

Steel grade:ss304 2b finish surface stainless steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ss304 2b finish surface stainless steel sheet Introduction

304 Stainless Steel 2B Finish | Stainless Supply

304 stainless steel 2B finish is a mill finish, which is smooth and NOT the brushed finish commonly seen on kitchen appliances. 304 stainless steel 2B finish is light gray in color. 304 stainless steel 2B finish may or may not have a protective film on one side to prevent scratching.

2B, 2D and BA Cold Rolled Finishes

What Are Cold Rolled finishes?[PDF]

Guide to Stainless Steel Finishes

GUIDE TO STAINLESS STEEL FINISHES 2G A uniform uni-directional surface that has low reflectivity. The coarse finish restricts it to internal applications. The profiled stainless steel sheet clad counters of this Bank in Flensburg, Germany, were ground to provide a lively contrast to the smooth wooden surfaces. Mechanically applied finishes may ...

Ss 304 2b Finish Stainless Steel Sheet, Ss 304 2b Finish ...

Alibaba offers 1,740 ss 304 2b finish stainless steel sheet products. About 92% of these are stainless steel sheets, 3% are steel sheets. A wide variety of ss 304 2b finish stainless steel sheet options are available to you, such as astm, aisi, and jis.

No. 2B Mill Finish Stainless Steel & Plate | Penn ...

No. 2B Mill Finish Stainless Steel & Plate. No. 2B Finish is a bright cold rolled finish, produced very similarly to the No. 2D finish.. The difference in the production lies in the final light cold rolling pass of a No 2B Finish, that is is done using polished rolls.

2B vs. No. 4 Stainless Steel Finish | All Metals Fabrication

Corrosion resistance is a determining factor for a stainless steel finish. Generally, the rougher the surface finish, the lower the corrosion resistance. The most common stainless steel finish is 2B. This method is cold rolled, heat-treated, pickled and pinch-passed, resulting a slightly reflective surface similar to a cloudy mirror.

Ss304 Hl Surface Finish Stainless Steel Sheet, Ss304 Hl ...

Alibaba offers 112 ss304 hl surface finish stainless steel sheet products. About 26% of these are stainless steel sheets. A wide variety of ss304 hl surface finish stainless steel sheet options are available to you, such as astm, aisi, and jis.[PDF]

Roughness measurements of stainless steel surfaces

5 ROUGHNESS MEASUREMENTS OF STAINLESS STEEL SURFACES Summary Although Ra values are commonly used to describe surfaces, the limits of this indicator should not be forgotten. Also the notation is important: “Ra ≤ 0.5 µm”, for instance, does not have the same meaning as “Ra max 0.5 µm”.Surface designations such as “2B”[PDF]

Stainless Steel – Surface Finishes - Stealth 316

Stainless Steel – Surface Finishes Introduction Surface finish is an important element in any specification of stainless steel regardless of the intended use. For those applications where appearance is important, finish is a design element and must be specified. In non-decorative applications the surface finish …

SSINA: Stainless Steel: Finishes

After these processing steps, the surface has a dark non-uniform appearance called “scale”. Surface chromium has been lost during the previous processing steps, and, without removal of the scale, the stainless steel would not provide the expected level of corrosion resistance.

No. 2B Mill Finish Stainless Steel & Plate | Penn ...

No. 2B Mill Finish Stainless Steel & Plate. No. 2B Finish is a bright cold rolled finish, produced very similarly to the No. 2D finish.. The difference in the production lies in the final light cold rolling pass of a No 2B Finish, that is is done using polished rolls.

ss304 2b finish surface stainless steel sheet

ss304 2B finish stainless steel sheet with pvc films The chromium content of the steel allows the formation of an invisible corrosion resistant chromium oxide film on the steel surface. ss304 2B finish stainless steel sheet with pvc films Stainless steel plate is used for a huge variety of applications in many diverse industries including ...

Ss 304 2b Mill Surface Finish Stainless Steel Sheet Garnet ...

Ss 304 2b Mill Surface Finish Stainless Steel Sheet Garnet Blasting Matte Finish Stainless Steel Sheet , Find Complete Details about Ss 304 2b Mill Surface Finish Stainless Steel Sheet Garnet Blasting Matte Finish Stainless Steel Sheet,Ss 304 2b Mill Surface Finish Stainless Steel Sheet,Ss 304 2b Finish Blasting Stainless Steel,Matte Finish Stainless Steel Sheet from Supplier or …

Stainless Steel 2B Finish Sheets - girnarstainless

Engaged as a manufacturer and supplier, we are engrossed in offering Stainless Steel 304L 2B Finish Sheets. These sheets are manufactured using high-grade stainless steel that is sourced from authentic vendors of the industry.

Surface 2B Finished 321 Stainless Steel Sheet

2b Surface Stainless Steel Sheet, 2b Surface Stainless ...Alibaba offers 3,401 2b surface stainless steel sheet products. About 92% of these are stainless steel sheets, 2% are steel sheets. A wide variety of 2b surface stainless steel sheet options are available to you, such as aisi, jis, and astm.

304 Stainless Steel Sheets - 304 Matt Finish SS Sheets ...

304 Matt Finish SS Sheets Surface Finishes for Stainless Steel Sheet are as follows: BA Finish Stainless Steel Sheet: Bright annealed finish; processed with bright heat treatment after cold rolling 2B Finish Stainless Steel Sheet: Cold rolled annealed and pickled and skin passed Matte Finish Stainless Steel Sheet: Cold rolled annealed and pickled and polished with 150 to 180 grit

Stainless Steel 2B & 2D Sheet - Penn Stainless Products

Stainless Steel 2B & 2D Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet. Besides standard 304, 304/L and 316/L, aerospace stainless grades such as 321, 347, 17-4Ph and 17-7Ph are stocked.[PDF]

Stainless Steel – Surface Finishes - Stealth 316

Stainless Steel – Surface Finishes Introduction Surface finish is an important element in any specification of stainless steel regardless of the intended use. For those applications where appearance is important, finish is a design element and must be specified. In non-decorative applications the surface finish …

What surface finishes are available on stainless steels?

What surface finishes are available on stainless steels? There are many different types of surface finish on stainless steel. Some of these originate from the mill but many are applied later during processing, for example polished, brushed, blasted, etched and coloured finishes.

Stainless Steel Surface Finishes - askzn.co.za

The Standard Mill Surface Finished are laid down in Specifications (BS 1449, Part 4, and the Committee of Stainless Steel Producers, American Iron & Steel Institute). The finished are designated by a system of numbers, and these are broadly described hereunder relative to the finishing operations employed.

316L Stainless Steel Sheet 2B Mill Finish | Stainless Supply

316L stainless steel sheet 2B finish has a mill finish, which is smooth and NOT the brushed finish commonly seen on kitchen appliances. Our 316L stainless steel sheet 2B finish will not have a protective film to prevent scratching, so the 316L stainless steel will commonly have scratching (not gouging) from when it is cut to size, fabricated, shipped, etc.

No 4: The Workhorse Finish - Australian Stainless Steel ...

No 4: The Workhorse Finish . No 4 finish stainless steel is the workhorse of the light fabrication industry. The easiest of the finishes to maintain, No 4 finish is used for work surfaces, handrails and where appearance is important. ... Figure 2: Surface trace of a typical 2B finish

Stainless Steel Sheets – 304, 430 Cold Rolled, 2B Finish ...

304 Stainless Steel sheets and plates are available in several finishes, but the most common are 2B (milled) finish, #4 finish (brushed) and Chrome #8 (mirror finish) is also readily available. 2B is a milled finish that is dull grey and semi-smooth to the touch.

Buy Ss304 2b Finish Stainless Steel Plate sheet - w3s.in

SS304 2B finish stainless steel sheet. We are mainly engaged in R&D and production of steel product and steel machining,the SS304 2B finish stainless steel sheet and services have covered in more than 100 countries around the world,provide the steel procurement One-Stop solutions for customers.With decades' development,During the past 18 years ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.