Tel: +86-371-86151827

high strength aluminum zinc alloy coated steel sheet coil

Steel grade:high strength aluminum zinc alloy coated steel sheet coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

high strength aluminum zinc alloy coated steel sheet coil Introduction

Aluminum zinc alloy coated Steel Sheet

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated …· PDF Designation: A 792/A 792M – 09 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process1 This standard is issued under the fixed designationA792/A792M; the number immediately following the designation indicates the ...

zinc coating steel coil in steel sheets

Aluminum Zinc (aluzinc) Alloy Coated Steel Coils/Sheets. Steel Coil, Aluminum Alloy, Aluminum Alloy Roofing Sheet manufacturer / supplier in China, offering Aluminum Zinc (aluzinc) Alloy Coated Steel Coils/Sheets, 970 EPS Polystyrene Sandwich Panel Light Weight, Prepainted Steel Roofing Sheet Color Coated Tile and so on. Learn more

Aluminium Zinc Coated Steel - China Supplier, Wholesale

SGLCC SGLCD Aluminum Zinc Alloy Coated Steel Acid Proof 0.15mm - 0.8mm Thickness. Corrosion Resistanc Aluminium Zinc Coated Steel Sheet Coil 800mm To 1250mm Width. ... High Strength Aluminum Zinc Cold Rolled Steel Coil GL With SGS Approvals.

AS1397 G550 high strength steel sheet in coil

G550 Cold Rolled Zinc Coated Steel Strip. Steel Coil and Steel Sheet Manufacturers and Suppliers - Steel Coil . Color Coated PPGI Coil PPGL Prepainted Galvanized Steel Coil for Roofing High Strength Full Hard G350 G550 GL Zinc Aluminized Sheet Galvalume Steel Coil CRC Coils Bright Finished Cold Rolled Steel Sheet and Cold Rolled Strips.

7068 aluminum sheet - aluminum-alloy

AN ALUMINIUM ALLOY WITH THE STRENGTH OF STEEL. 7068 alloy is a 7000 series aluminium-zinc alloy registered with the US Aluminium Association and produced to AMS 4331 (chemical composition and mechanical properties) Chat Now Send Inquiry; Aluminum 7068-T6; 7068-T6511 Rod & Bar -...

Fasteners | Bolt Grades, Strength & Materials

Alloy steel, aluminum, brass, silicon bronze, and stainless steel are just some of the materials that fasteners are manufactured in. The combination of material, treatment, hardening, and coating (aka plating) are essential to determining the strength and appropriate application for each fastener.

Aluminum Sheet & Coil - Continental Steel & Tube Company

Browse Aluminum Sheet & Coil in the Continental Steel & Tube Co. catalog including Aluminum Sheet and Coil - Series 1100-0,Aluminum Sheet and Coil - Series 1100-H14,Aluminum Sheet - Series 2024-T3 Alclad,Aluminum Sheet - Series 2024-T3 Bare,Aluminum

aluminum alloy strength chart- Aluminum/Al foil,plate ...

aluminum alloy strength chart . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

High Strength Aluminum Alloys, High Strength Aluminum ...

A wide variety of high strength aluminum alloys options are available to you, such as coil, plate. You can also choose from 2000 series, 6000 series, and 1000 series. As well as from is alloy, non-alloy. And whether high strength aluminum alloys is coated, embossed, or anodizing.[PDF]

SECTION 076200 - SHEET METAL FLASHING AND TRIM …

SHEET METAL FLASHING AND TRIM 076200 - 3 1. Zinc-Coated (Galvanized) Steel Sheet: ASTM A 653/A 653M, G90 (Z275) coating designation; structural quality. 2. Aluminum-Zinc Alloy-Coated Steel Sheet: ASTM A 792/A 792M, Class AZ50 coating designation, Grade 40 (Class AZM150 coating designation, Grade 275); structural quality. 3.

Aluminium Zinc Coated Steel - China Supplier, Wholesale

SGLCC SGLCD Aluminum Zinc Alloy Coated Steel Acid Proof 0.15mm - 0.8mm Thickness. Corrosion Resistanc Aluminium Zinc Coated Steel Sheet Coil 800mm To 1250mm Width. ... High Strength Aluminum Zinc Cold Rolled Steel Coil GL With SGS Approvals.

Steel Aluminum Alloy Sheet Coils - natural-elements …

Zinc Aluminum-Magnesium Coated Steel Conception. This Zinc Aluminum-Magnesium Coated Steel Sheet in Coils which is also called ZAM coated steel is our mill newly developed with coating layers of 100-450g +/-10g which owns very strong corrosion-resistant ability. Aluminized steel - Wikipedia. Aluminized steel maintains the strength of high-alloy ...

High Tensile Color Coated Steel Ppgi Coil

High Tensile Color Coated Steel Ppgi Coil Wholesale, Coil ...High tensile color coated steel ppgi coil products are most popular in Africa, South America, and Mid East. You can ensure product safety by selecting from certified suppliers, including 26 with ISO9001, 16 with Other, and 4 …

Grades Classification Of Aluminum And Their Application ...

Brand of 5052.5005.5083 and 5A05 .The 5000 series aluminum plate belongs to the commonly used alloy aluminum plate series, the main element is magnesium, containing magnesium content between 3-5%.Also known as aluminum magnesium alloy.Its main features are low density, high tensile strength and high elongation.Aluminum and magnesium alloys ...

Zinc Aluminium Alloy Plate - hopkinsplasticsurgery

ZAM® - Zinc, aluminum and magnesium alloy coated steel. ZAM ® (Zinc, 6% Aluminum, 3% Magnesium Alloy Coated Steel) ... ZAM ® is a remarkably superior corrosion-resistant hot-dip Zinc-Aluminum-Magnesium alloy coated steel sheet product. Wheeling-Nisshin is the first company in the Americas to produce such a product. Learn more

Plate Steel, Sheet Steel & Aluminum Sheets | Owen Industries

Galvanized – A653 – CS Type B – This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hotdip process in coils and cut lengths. Galvannealed – A653 –A653M-16 – The galvanization is made through the hot-dipping (hot-dip galvanizing) process and an immediate in-line annealing ...

Coated Surface Treatment and High strength

Galvannealed zinc-iron alloy coating (ZF) ... Complete Details about Coated Surface Treatment And High-strength Aluminum Rolls Special Use Colour Coated Coil,Color Coated Aluminum Coil,Cold Rolled Aluminum Coil,Embossed Aluminum Roofing Coil from Aluminum Coils Supplier or Manufacturer-Linyi Jinhu Color Coating Aluminum Industry Co., Ltd ...

High Strength Aluminum Alloys, High Strength Aluminum ...

A wide variety of high strength aluminum alloys options are available to you, such as coil, plate. You can also choose from 2000 series, 6000 series, and 1000 series. As well as from is alloy, non-alloy. And whether high strength aluminum alloys is coated, embossed, or anodizing.

Zinc Caoted Steel Coil, Zinc Caoted Steel Coil Suppliers ...

Alibaba offers 288 zinc caoted steel coil products. About 98% of these are steel sheets. A wide variety of zinc caoted steel coil options are available to you, such as free samples.

Aluminum Profile, Aluminum Rod, Coil, Wire, Aluminum Sheet ...

These coated coils with high impact offer weather proof operations to the user with ease of installations. In addition, at aluminum sheet suppliers you can also find high strength aluminum sheet in or stock to use in building materials, shoes, automotive products and tens eyes. Being heat treatable in nature, sheets made from aluminum are ...

The Strength of Aluminum | The Aluminum Association

Pure aluminum is mixed with other elements to create high-strength alloys. Common additives used to increase the strength and formability of aluminum include silicon, magnesium and copper. Aluminum-zinc alloys are some of the strongest alloys available today and are commonly used by the automotive and aerospace industries.

Item # 2024-T3A-050-144, Aluminum Sheet - Series 2024-T3 ...

Browse Item # 2024-T3A-050-144, Aluminum Sheet - Series 2024-T3 Alclad in the Continental Steel & Tube Co. catalog including Item #,Item Name,Description,Material,Shapeform,Series,Grade,Preparation,Temper,Thickness,Size,Width,Length,Sheet Weight …

aluminum alloy strength chart- Aluminum/Al foil,plate ...

aluminum alloy strength chart . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

High strength gi coil steel coil and cold rolled zinc sheet

High strength Steel Coil Z275 supplier - gofschools.org. Hot DIP Galvanised Steel Sheet in Coil JIS G3302, Galvanized Steel Coil/Sheet, Galvanised Plain Sheet manufacturer / supplier in China, offering Hot DIP Galvanized High-Strength Strips From China /Z275 Gi Steel Coil, Print PPGI PPGL Steel Coils Manufacturer Supplier, Prepainted Galvanized Steel Coil Cold Rolled Steel and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.