Tel: +86-371-86151827

alfa laval m10 titanium heat exchanger plate

Steel grade:alfa laval m10 titanium heat exchanger plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

alfa laval m10 titanium heat exchanger plate Introduction

[PDF]

Alfa Laval M10

with a large selection of plate and gasket types. In addition to normal single plate configuration, this model is ... Flexible configuration heat transfer area can be modified ... Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB.

Alfa Laval M10-BFM Plate Heat Exchanger, PHE Machine ...

M10-BFM Heat Exchanger, Alfa Laval Plate Heat Exchanger, Alfa Laval M10-BFM Plate Heat Exchanger, PHE Machine, +91 98252 08590 [email protected] Open 9AM - 8PM Twitter Facebook Google Plus Pinterest LinkedIn Youtube[PDF]

Alfa Laval M10-BW

Alfa Laval M10-BW Gasketed plate-and-frame heat exchanger M10-BW. Applications Heating and cooling of aggressive media. Duties in refrigeration installations. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place.

Alfa Laval M-Series Gasketed Plate Heat Exchanger

An Alfa Laval M Series plate heat exchanger is an efficient solution for general heating and cooling duties in hygienic applications. In addition, the series is a perfect alternative for heating and cooling service media, including portable water, glycol, and chilled water tempering.

M10 - Alfa Laval - PDF Catalogs | Technical Documentation ...

pdf.directindustry› Alfa LavalM10 M10-BFG Flow principle of a plate heat exchanger Plate heat exchanger Applications General heating and cooling duties. Heating by means of steam. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place.

Alfa Laval - Gasketed plate heat exchangers

The heat transfer area of a gasketed plate-and-frame heat exchanger consists of a series of corrugated plates, assembled between the frame and pressure plates, which retain the design pressure. For the highest thermal performance and to enable a very close temperature approach, fluids normally run counter-currently through the heat exchanger.

M3, M6, M10, M15 Series Plate Heat Exchanger - Alfa Laval ...

pdf.directindustry› Alfa LavalApplications For your utility heating and cooling duties the industrial plate heat exchangers of Alfa Laval can be used . These are detailed in the following product sheets. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will ...

Alfa Laval - Industrial semi-welded line

Alfa Laval Industrial semi-welded line is used when gaskets are not suitable for one of the process media. Also, the semi-welded line can take a higher design pressure compared to fully gasketed plate-and-frame heat exchangers.

M10 - Alfa Laval - PDF Catalogs | Technical Documentation ...

pdf.directindustry› Alfa LavalM10 M10-BFG Flow principle of a plate heat exchanger Plate heat exchanger Applications General heating and cooling duties. Heating by means of steam. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place.

Alfa Laval Plate Heat Exchanger Models M10 Titanium Heat ...

Alfa Laval Plate Heat Exchanger Models M10 Titanium Heat Exchanger Sanitary Gaskets In gasketed plate Heat Exchanger design,plate gasket is the core part that attaches to the heating plate inside the plate type exchangers to allocate the flow path and play an important role of sealing the liquid to prevent it from leaking to the outside.[PDF]

Plate heat exchanger - Alfalaval - Giaflex

M10 M10-BFG Flow principle of a plate heat exchanger Plate heat exchanger Applications General heating and cooling duties. Heating by means of steam. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place.

M3, M6, M10, M15 Series Plate Heat Exchanger - Alfa Laval ...

pdf.directindustry› Alfa LavalApplications For your utility heating and cooling duties the industrial plate heat exchangers of Alfa Laval can be used . These are detailed in the following product sheets. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will ...

Alfa Laval Plates | Alfa Laval Plate Exchanger | Heat ...

Grano is a global leading plate heat exchanger manufacturing, provides PHE plates including welded Heat Exchangers and alfa laval plate exchanger and gasketed plate heat exchangers.[PDF]

Alfa Laval plate heat exchangers

Alfa Laval gasketed heat exchangers Alfa Laval plate heat exchangers (PHEs) are the most cost-efficient solution available for your comfort heating and cooling needs. The result of decades of development and testing, our PHEs utilise well-proven materials and advanced designs that optimise performance and reduce your operating costs.[PDF]

Alfa Laval M10 - oshbv.nl

Alfa Laval M10 Gasketed plate-and-frame heat exchanger M10-BFG. Applications General heating and cooling duties. Heating by means of steam. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place.

alfa laval plate | eBay

2000yr alfa laval plate type heat exchanger m10-mfg 4" inlet 4" outlet 55 plates see more like this Used- Alfa Laval Plate Heat Exchanger, Type AM20-FG, 739.8 Square Feet. Approxim[PDF]

Plate heat exchanger M10-MFHC - Harco Enterprises

M10-MFHC Plate heat exchanger Basic unit Plates Stainless steel AISI 316, titanium or SMO. Gaskets Nitrile-FDA, Nitrile-Brewery, EPDM or EPDM-FDA. Clip-On design. Frame Frame plate and pressure plate of mild steel, clad with stainless steel in glass blasted finish. Nuts of chromium plated brass. All other parts of stainless steel. Technical ...

Plate Heat Exchanger/Plate Heat Exchanger ... - hfm …

HFM supplies plate heat exchanger, plate and frame heat exchanger, brazed plate heat exchanger, welded plate heat exchanger and other types of heat exchanger for various applications and industries. Also HFM provides plate heat exchanger gaskets & plates replacement for most makes and models, including Alfa Laval, GEA, APV, Tranter, Sondex, SWEP, Sigma, ITT, Funke, etc.

Alfa Laval Replacement Gaskets - WCRUK

WCR UK offers plates and gaskets for all Alfa Laval Plate Heat Exchanger models. Call 01246 856396 for a quote

alfa laval heat exchanger | eBay

ALFA LAVAL HEAT EXCHANGER PRO 3 FLOW GASKET SNAP IN NBR, 3" PORT; ... Used Alfa Laval 871 Square Foot Titanium Compabloc Heat Exchanger. Pre-Owned. $21,500.00. or Best Offer. ... ALFA LAVAL M6-M HEAT EXCHANGER CHANNEL PLATE GASKET, 8588, 323301414-6, 3" PORT. $150.00. or Best Offer +$14.00 shipping.

Alfa Laval Heat Exchanger Plates & Gaskets | WCR

Alfa Laval APV GEA Mueller Tranter Sigma (Schmidt-Bretten, API) Sondex SWEP ITT Standard Bell & Gossett Vicarb WCR Services & Support Heat Exchanger Cleaning Leak Detection Full Service Re-Gasketing Plate Exchange Programs Inventory Management On-Site Assistance Plate Frame Handling Re-Pressing of Plates Spanner Wrenches Shell & Tube Refurbishment[PDF]

M6-MW - Thermal Transfer Systems Incorporated

M10-BW M10-BW Semi-welded plate heat exchanger Applications Heating and cooling of aggressive media. Duties in refrigeration installations. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.