Tel: +86-371-86151827

s355k2 steel hr plate

Steel grade:s355k2 steel hr plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s355k2 steel hr plate Introduction

Beverly Steel - S355K2+N Steel Plate

S355K2+N High Tensile Steel Plates S355 – offers high yield and rx health drugs tensile strength with a minimum yield strength of 355 N/mm² , a structural grade steel which is widely used in engineering and construction industries, can be supplied with a variety of treatments and test options to ensure that it is a highly usable steel in ...

S355K2 Structural Steel & Steel Plate | Murray Steel Products

S355K2 steel plate and structural steel is available in a wide range of sizes from Murray Steel Products, along with associated processing services, including profiling, cutting and drilling.

S355K2+N Steel Plate Suppliers | Plate S355K2 | S355K2 ...

Triton Alloys Inc. is S355K2+N Steel Plate suppliers, delivering to the whole of the world. we are ISO 9001:2008 accredited and supplies S355K2+N Steel Plate to internationally approved quality standards for applications. S355K2+N Steel Plate have excellent quality to fully satisfy customer’s requirements.

EN 10025-2 S355K2 high strength structural steel plate ...

EN 10025-2 S355K2 High Yield Strength Structural Steel Plate. S355K2+N and S355K2G3 are the same steel grades as both grades delivery condition are normalized. S symbol for Structural Steel. JR symbol 20 temperature impact test. J0 syambol 0 temperature impact test. J2 symbol -20 temperature impact test

S355K2 steel plate -- Shanghai Royal Industry

S355K2 steel is a kind of common carbon steel material. We also call S355K2 steel as common structural steel. The equal material of S355K2 steel are : DIN-ST52-3, JIS-SS540, ASTM - A572GR60. The standard of S355K2 is EN 10025. EN 10025 S355K2 steel plate grade usually used into the industries like Construction, crane, equipment , Crusher ...

S355K2 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S355K2 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

hot rolled steel plate s355k2 - alibaba

Alibaba offers 165 hot rolled steel plate s355k2 products. About 52% of these are steel sheets. A wide variety of hot rolled steel plate s355k2 options are available to you, such as free samples.

s355j2-steel-plate - S355J2,S355J2G3,S355K4,S355K2 ...

Unitedsteel Stainless Factory; Unitedsteel Plate Factory are specialized in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill. Our stock warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy steel plates.

S355K4 Stock, EN 10025-2 S355K4, S355K4 Steel Plate ...

Unitedsteel Stainless Factory; Unitedsteel Plate Factory are specialized in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill. Our stock warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy steel plates.[PDF]

Hot Rolled Steel Sheets & Plates - Star Global

Hot Rolled Steel Sheets & Plates Our long association with Tier 1 Mills in Europe, CIS, Asia and Far East gives us distinctive advantage to service a wide spectrum of HR Plate requirements in Project Sector. The team has rich experience in supplying Plates to meet various project applications viz., Tank

EN 10025-2 S355K2 high strength structural steel plate ...

EN 10025-2 S355K2 High Yield Strength Structural Steel Plate. S355K2+N and S355K2G3 are the same steel grades as both grades delivery condition are normalized. S symbol for Structural Steel. JR symbol 20 temperature impact test. J0 syambol 0 temperature impact test. J2 symbol -20 temperature impact test

S355K2 steel plate -- Shanghai Royal Industry

S355K2 steel is a kind of common carbon steel material. We also call S355K2 steel as common structural steel. The equal material of S355K2 steel are : DIN-ST52-3, JIS-SS540, ASTM - A572GR60. The standard of S355K2 is EN 10025. EN 10025 S355K2 steel plate grade usually used into the industries like Construction, crane, equipment , Crusher ...

Steel Plate S355k2, Steel Plate S355k2 Suppliers and ...

Alibaba offers 89 steel plate s355k2 products. About 98% of these are steel sheets. A wide variety of steel plate s355k2 options are available to you, such as free samples. There are 85 steel plate s355k2 suppliers, mainly located in Asia.

s355k2 n factory,A36 mild steel,astm a572 a36 grade 50 ...

S355K2 Low Alloy High Strength Steel Plate. Unitedsteel Plate Factory are specialized in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill. S355K2+N Steel Plate Suppliers | Plate S355K2 | S355K2 ...

S355K2+N – Steel Plates– Alsider

They are the properties of grade S355K2 at room temperature in the normalized state. (+ N) The S355K2 + N together with the steel S355J2 + N are two of the qualities of thicker steels whose strength is found in plates of more than 100 mm (taking into account that the lowest thicknesses are up to 50 mm). S355K2+N - Dimensions

S355k2 Alloy Steel Plate - w3s.in

s355j2-steel-plate - S355J2,S355J2G3,S355K4,S355K2 ...Unitedsteel Stainless Factory; Unitedsteel Plate Factory are specialized in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill.Sa240-316L · S355nl, En 10025-3 · S235jrg2,S235j2g3, S355j2g3

S355JR, S355J2, S355K2, S450J0 hot rolled steel plate ...

S355J0 steel plate. S355J0 steel is a more yield and tensile strength steel grade than S235JR and S275JR in 0 degree temperature impact test. It is used to be in in riveted, bolted, or welded construction of bridges and buildings. D elivery condition is hot rolled or c old rolled. If super thick steel plate…

S355j2 Carbon Steel Plates, S355j2 Carbon Steel Plates ...

Alibaba offers 316 s355j2 carbon steel plates products. About 96% of these are steel sheets, 1% are stainless steel sheets. A wide variety of s355j2 carbon steel plates options are available to you, such as aisi, astm, and gb.

EN10025 2 Specification-S235-S275-S355 Steel Plate

S275 Hot Rolled Steel Plate S355 Rectangular Steel Pipe AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties.

S355 Structural Steel Plate | Leeco Steel, LLC

leecosteel› …› EN Standard Steel PlateS355 structural steel plates are high strength, low alloy steel plates that cover 4 of 6 categories under the EN 10025:2004 European standard. S355 has excellent usability & is used in almost every facet of structural fabrication. Request a quote today!

Buy S355jr S355j0 S355j2 S355k2 Alloy Steel - w3s.in

Steel Sheet, Steel Products, Steel manufacturer / supplier in China, offering En10025 S355j0/S355j2/S355K2 Wind Power Hot Rolled Steel Plates, A572/A633 /A709 High Quality Engineering Alloy Structural Steel Plate, A588/A242/S355/Corten a/B Weather Resistant Steel Pipe Corten Plate and so on. Learn more. Buy S355j2 Steel Plate En10025 - aipmt2.in.

s355jr en10025-2 s355jr steel plate s355jr material-S355J2 ...

S355JR steel plate . S355JR steel is a more yield and tensile strength steel grade than S235JR and S275JR. it is used to be in in riveted, bolted, or welded construction of bridges and buildings. S355JR mean that the delivery station is hot rolled or control rolled.

supplier of s355k2 n factory,A36,Q235B,Q345B steel plate ...

China EN10025 2 S355K2 HR plate sheet sale Carbon Steel . EN10025_2 S355JR steel plate which is intended for manufacture the plants of factory ,the common constructure and construction machinery and equipment. Usually this grade would be signed as S355JR+N or S355JR N,it means these plates shall be need Normalized delivery condition.[PDF]

HOT ROLLED STEEL PLATES - dsssteel

HOT ROLLED STEEL PLATES Boiler / Pressure Vessels Ship Building Grades - ABS Offshore Commercial Grades - ASTM / ASME 60 /65/70 (Normalized / NAC Grade A / B / C / AH32 / AH36 / EH 36 Grades - S355J2 / S355K2 / API2H50 Grades - ASTM A36 / S275JR / S355JR / S355JO Width: 2m /2.5m /3.05 HOT ROLLED STEEL PLATES Length: 6m /8m /10m /12m Thickness ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.