Tel: +86-371-86151827

hot dipped iron sheet steel plate with test report

Steel grade:hot dipped iron sheet steel plate with test report

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot dipped iron sheet steel plate with test report Introduction

[PDF]

INSPECTION - galvanizeit.org

most commonly used in Europe. In all cases, the inspection of hot-dip galvanized steel is conducted at the galvanizing plant prior to shipment of the product. The requirements for hot-dip galvanized coatings are found in three ASTM specifications; • A123/A123M Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products[PDF]

JIS H 0401 : 2007 Test methods for hot dip galvanized …

Test methods for hot dip galvanized ... Rolled steelsRolled steels such as steel sheet, section, flat bar, steel bar and others 3) Prefabricated steel productsPrefabricated steel products such as iron tower members, bridge members, steel frame members, metal fittings for shipbuilding, fine hardware, tank and ...

A653 - Galvanized Steel Sheet - Online Metal Store

A653 - Galvanized Steel Sheet. A653 Galvanized Steel Sheets offer excellent corrosion resistance due to its galvanized coating and zinc contents. Because of its high corrosion resistance, A653 is frequently found in outdoor hardware such as outdoor signage, garbage cans, heating and cooling systems, and electrical protection.

Galvanized Iron And Steel: Characteristics, Uses And ...

The process of galvanizing sheet iron was developed simultaneously in France and England in 1837. Both of these methods employed a "hot dipping" process to coat sheet iron with zinc. Like tinplate, early galvanized metals were hand dipped. Today almost all galvanized iron and steel is electroplated.[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Coated Steel Sheets Hot-dip Galvanized Sheets, Electrogalvanized Sheets and Precoated Sheets ... Deck plate Office equipment AV equipment Copying machine Office equipment Washing machine Copying ... Assessment test : After drawing grid pattern Erichsen stretch forming, cellophane[PDF]

Hot-Dip Galvanizing to ASTM A123 Fact Sheet

Hot-Dip Galvanizing to ASTM A123 Fact Sheet Hot-dip galvanizing (HDG) is the process of dipping fabricated steel into a kettle or vat containing molten zinc. While the steel is in the kettle, the iron in the steel metallurgically reacts with the molten zinc to form a tightly-bonded alloy coating that provides superior corrosion protection to steel.

hot dip steel sheet metal - hopkinsplasticsurgery

Continuously Hot-Dip Coated Steel Strip and Sheet· PDF The lay-out of a hot-dip coating line is shown in Fig. 1. Normally the flat steel strip is cleaned, re-crystallised or heated up in an annealing furnace and cooled down to the temperature of the molten metal in the coating pot. There it is hot-dip …[PDF]

FLAT ROLLED PRODUCTS - ussteel

Hot Rolled Sheet Steel Hot Rolled Sheet Steel is an unprocessed, mill edge coiled product and does not include any processing such as temper rolling, tension leveling, pickling, oiling or side trimming. Hot Rolled products are produced to ASTM Specifications A1011, A659, A635 or …

hot dip steel sheet metal - hopkinsplasticsurgery

Continuously Hot-Dip Coated Steel Strip and Sheet· PDF The lay-out of a hot-dip coating line is shown in Fig. 1. Normally the flat steel strip is cleaned, re-crystallised or heated up in an annealing furnace and cooled down to the temperature of the molten metal in the coating pot. There it is hot-dip …

A653 - Galvanized Steel Sheet - Online Metal Store

A653 - Galvanized Steel Sheet. A653 Galvanized Steel Sheets offer excellent corrosion resistance due to its galvanized coating and zinc contents. Because of its high corrosion resistance, A653 is frequently found in outdoor hardware such as outdoor signage, garbage cans, heating and cooling systems, and electrical protection.[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Coated Steel Sheets Hot-dip Galvanized Sheets, Electrogalvanized Sheets and Precoated Sheets ... Deck plate Office equipment AV equipment Copying machine Office equipment Washing machine Copying ... Assessment test : After drawing grid pattern Erichsen stretch forming, cellophane

The Heat of Galvanizing and Potential Warping of Steel ...

The most common type of heat related warpage is with solid sheet material, perforated plate, wire mesh, and expanded metal. These all have a high surface area to mass and will expand quite a lot at galvanizing temperature. If these materials are done in loose sheets, their expansion and contraction will …[PDF]

Study of the Mechanical Properties of N. Coni the Hot …

during forming. Aluminium reacts preferentially with the steel to form a thin iron-aluminium intermetallic layer which acts as a barrier and delays the growth of the zinc-iron intermetallic layer. Galvalume® is the trade name of steel sheets coated with 55%Al-Zn alloy. It is applied by a continuous hot dip processPublished in: Journal of The Brazilian Society of Mechanical Sciences and Engineering · 2009Authors: N Coni · M L Gipiela · Ana Sofia C M Doliveira · Paulo Victor Prestes MarcondesAffiliation: Federal University of Parana

Galvanized Steel, 90 Galvanized Steel Sheets, G90 Steel ...

Galvanized Steel. Galvanized steel sheets are continuously hot dip coated with a durable protective coating of zinc. Can be formed without flaking or peeling. Stamping, cold drawing, double seaming and brake or roll forming will not impair their protective qualities. Can be welded and soldered. Coatings are G90 (minimum .90 oz. per foot).

Thick Galvanized Coatings, How to Get, What is Maximum

letter 45732, "Thickness of hot dip galvanizing vs. salt spray test results" Q. I am trying to find information on the relationship between the quality of the hot-dipped zinc coating on light gauge non-structural sheet steel and the thickness of the steel.

Galvanized steel hardness - Sunny Steel

Galvanized steel hardness Galvanized Steel are those steel that has been covered with a layer of zinc metal. Galvanized steel in terms of hardness test is a Brinell hardness, Rockwell hardness, Vickers hardness, Shore hardness, micro-hardness and high-temperature hardness, etc.,

Hot-dip galvanization - Wikipedia

Hot-dip galvanization is a form of galvanization.It is the process of coating iron and steel with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C). When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen (O 2) to form zinc oxide (), which further reacts with carbon dioxide (CO 2 ...Process·

hot dip steel sheet with price - w3s.in

Price hot dipped steel coil sheet plate. Hot DIP Galvanized Steel Sheet / Coil, Price Hot Dipped Galvanized Steel Coil/, Galvanized Steel Coil (zinc coated) manufacturer / supplier in China, offering Zinc Steel Coil, Print PPGI PPGL Steel Coils Manufacturer Supplier, Prepainted Galvanized Steel Coil Cold Rolled Steel and so on. Learn more[PDF]

HOT DIP GALVANIZED COATING PROCEDURE

HOT DIP GALVANIZED COATING PROCEDURE Certified ISO 9001:2008 By ... Sangchareon Hot Dip Galvanize is the second factory. It was established in year 2005 with the ... thin, flat steel plate or other flat material such as wire mesh. The cause of this is differential thermal expansion and contrac-[PDF]

Safety Data Sheet for STEEL - Hanna Steel

Safety Data Sheet for STEEL Section 1 – Identification Variations: Galvanized Steel, Hot/Cold Rolled Steel, Carbon Steel, Structural Steel, High Strength Low Alloy Steel Recommended Use: Construction, machine parts and finished goods ... Iron and steel founding, but not iron or iron oxide, has been listed as carcinogenic (Group 1) by IARC. ...[PDF]

Designation:A 653/A 653M–08 ... - United Metal Products

Designation:A 653/A 653M–08 Designation: A 653/A 653M – 09 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process1 This standard is issued under the fixed designationA653/A653M; the number immediately following the designation indicates the year[PDF]

Standard Specification for Pipe, Steel, Black and Hot ...

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless1 This standard is issued under the fixed designation A53/A53M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.