Tel: +86-371-86151827

low alloy plate s275j0

Steel grade:low alloy plate s275j0

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

low alloy plate s275j0 Introduction

Low Alloy Steel S275j0 - hopkinsplasticsurgery

S275J0, EN 10025-2 S275J0, S275J0 Steel Plate, S275J0 steel factory Unitedsteel Carbon Plate Factory are specialized in producing and exporting Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill at Unitedsteel Group.

S275j0 Low Alloy High Strength Steel Plates, S275j0 Low ...

There are 43 s275j0 low alloy high strength steel plates suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of s275j0 low alloy high strength steel plates respectively. S275j0 low alloy high strength steel plates products are most popular in Domestic Market, North America, and Mid East.

S275J0,S275J0 STEEL,S275J0 PLATE - Mild steel plate ...

S275J0. S275J0 steel is a kind steel grade under steel standard EN 10025-2.S275J0 steel plate is mainly used for steel structural buildings,frames and other steel body.S275J0 steel plate,J0 is for low temperature impacting test under zero centigree. In chinese steel standard GB,these is …

Carbon and low alloy steel steel plate - steel-plate-sheet

Low alloy high strength steel also can be called common low alloy steel,low alloy structural steel. Low alloy structural steel's total alloy content usually is not more then 3% .Except for Si and Mn, there is V,Ti,Nb,Al,Cr,Ni,Re,N and so on.

Alloy Steel - S275J0, S275J2, S235JR, S235J0, S235J2 ...

In low alloy steel plate, the main function of the alloying elements is to increase hardenability in order to optimize mechanical properties and toughness after heat treatment. The increased strength of this low alloy steel plate means that equipment can be built stronger but lighter, with less steel.

S275J0 - myco-com.biz

S275J0 steel is a kind steel grade under steel standard EN 10025-2. S275J0 steel plate is mainly used for steel structural buildings,frames and other steelbody.S275J0 steel plate,J0 is for low temperature impacting test under zero centigree.

S275j0 Alloy Steel Plate, S275j0 Alloy Steel Plate ...

About 36% of these are steel sheets. A wide variety of s275j0 alloy steel plate options are available to you, such as free samples. There are 44 s275j0 alloy steel plate suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of s275j0 alloy steel plate respectively.

S275j0 Low Alloy High Strength Steel - China Steel Plate ...

China S275j0 Low Alloy High Strength Steel, Find details about China Steel Plate, Steel Sheet from S275j0 Low Alloy High Strength Steel - WUGANG CHANG YU …

EN 10025-2 S275J0 high strength structural steel plate ...

S275J0 is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties. The plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.

EN 10025-2 S275J0 high strength structural steel plate ...

S275J0 is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties. The plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.

s275j0+n low alloy steel plate//s275j0 by Xinsteel Company ...

s275j0+n low alloy steel plate//s275j0; Xinsteel Company Sell Offers . s275j0+n low alloy steel plate//s275j0 - Sell offer Click to View Original Image. Product Name: s275j0+n //S275J0 low alloy plate ...

S275J0,S275J0+N Structural steel plate--Xin Steel ...

S275J0 steel is a kind steel grade under steel standard EN 10025-2. S275J0 steel plate is mainly used for steel structural buildings,frames and other steelbody.S275J0 steel plate,J0 is for low temperature impacting test under zero centigree. In chinese steel standard GB,these is also one steel grade is the same as S275J0,it is Q275C.These two...

EN10025-2 S275J0 1.0143 non-alloy structural steel plates ...

EN10025-2 S275J0 1.0143 non-alloy structural steel plates are low carbon high tensile strength steel, which can be readily welded to other weldable steel. With low carbon equivalent, S275J0 steel possesses good cold-forming properties.

S275j2 Low Alloy Steel Plate - w3s.in

S275J2,S275J2+N low alloy steel plate--Xin Steel ...Under EN 10025-2,there are three different steel grade for S275,it is S275J2,S275J0 and S275JR.S275j2 steel plate need to be done low temperature impacting test under minus 20 centigree,S275J0 done under zero centigree and S275JR steel plate done this impacting test under room temperature.

S275J2,EN 10025-2 S275J0,S275J0 steel plate,S275J2 ...

Home > Products > Low Alloy High Strength Steel > EN 10025-2 Steel Plate > EN 10025-2 Steel Plate S275J2,EN 10025-2 S275J0,S275J0 steel plate,S275J2 Supplier ... Gangsteel is specialized in supplying EN10025-2 steel plate in S275J0. For more information of S275J0 steel plates, please check them in following: Chemical composition % of the ...

EN 10025 S275J0 steel,EN 10025 S275J0 steel steel plate…

EN 10025 S275J0 steel. EN 10025 S275J0 steel mechanical property: S275J0 steel plate is one mainly of low alloy steel, S275J0 alloy steel plate is equal to DIN:St44-3U,NFA:E28-3,BS:43C and UNI:Fe430C.The tensile strength of S275Jo is 430-580MPa when its thickness is less than 3mm.

supplier of s275j0 steel plate,A36,Q235B,Q345B steel plate ...

Low Alloy Steel S275j0 - pond-pro. S275J0 steel is a kind steel grade under steel standard EN 10025-2.S275J0 steel plate is mainly used for steel structural buildings,frames and other steelbody.S275J0 steel plate,J0 is for low temperature impacting test under zero centigree.

High Strength Low Alloy Steel Plate, High Strength Low ...

Alibaba offers 2,701 high strength low alloy steel plate products. About 91% of these are steel sheets. A wide variety of high strength low alloy steel plate options are …

S275J0 S275J2 S275JR alloy steel plate - myco-com.biz

S275j0 Alloy Steel Plate, S275j0 Alloy Steel Plate . Alibaba offers 45 s275j0 alloy steel plate products. About 100% of these are steel sheets. A wide variety of s275j0 alloy steel plate options are available to you, such as aisi, astm, and gb.

EN10025(93) S275J0 steel, EN10025(93) S275J0 low alloy ...

EN10025(93) S275J0 low alloy high strength steel's total alloy content usually is not more then 3% . Except for Si and Mn, there is V,Ti,Nb,Al,Cr,Ni,Re,N and so on. EN10025(93) S275J0 low alloy high strength steel mechanical properties at ambient temperature for quenched and tempered steel plate:

EN10025 S275J0 S275J2 S275NL alloy steel plate

EN10025,S275J0,S275J2 STEEL PLATE--HENAN HZZ IRON The low alloy high strength steel plates of S275J0 and S275J2 could be supplied normalized or in an equivalent condition obtained by normalizing rolling. The maximum carbon equivalent values shall be increased as follows:

15mnv Alloy Steel Plate - pond-pro

S275nl Alloy Steel Plate sheet China SupplierKatalor is a professional A572 Gr50 A709 A633D St52 S355JO S355JR S275NL 16Mn 15MnV low alloy steel plate/sheet supplier in China. Alloy Steel Plate - steels-supplier. 16 mn is a major steel grade of high strength low alloy steel plate in most industries, The consumption of this type is very large.

Low-alloy Steel Plate(id:9666235). Buy China low alloy ...

Low-alloy and High-strength Steel Plate - Furui Steel Group Product Name: Low-alloy Steel Plate, High-strength Steel Plate, Carbon Steel Plate, Mild Steel Plate Application: Drilling rig, electric shovel, powered wheel, tipper, mining vehicles, excavators, loaders, bulldozers, industrial blowers ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.