Tel: +86-371-86151827

ss304 stainless sheet

Steel grade:ss304 stainless sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ss304 stainless sheet Introduction

304 / 304L Stainless Steel Sheet - T304 / T304L Sheet | O ...

onealsteel› Stainless Steel› Sheet304 / 304L Sheet Characteristics. 304 / 304L stainless steel sheet is used to manufacture stamped and machined parts for parts and products in corrosive and high heat applications. The stainless steel exhibits high corrosion resistance, high strength and temperature resistance. It can be become slightly magnetic when cold worked.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning304 Stainless Plate · Metals Depot

304 Stainless Steel Sheet #4 Brushed Finish | Stainless Supply

304 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 304 stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 304 stainless steel sheet #4 finish meets the criteria for both the #3 and #4 finish.

Differences between SS304 and SS316 stainless steel

Differences between SS304 and SS316 stainless steel. adv. ... Use of SS 304 vs SS316 vs SS 316L in a phenolic environment ... This is the third time the mfgr supplied heat deflector has rusted out. I am looking for sheet stainless steel that I can have cut and bend to specification.

304 Stainless and 304L Stainless Steel Sheet & Bar - AMS ...

304 / 304L stainless steel, also known as 18/8 stainless and often referred to as 302, is the most common stainless steel. 304 stainless steel contains a higher chromium and lower carbon content than other variations of type 302. It can be used in an "as welded" condition, while 302 must be annealed. AISI 304 is used in a variety of household and industrial applications.

Discount Steel – 304 Stainless Steel Sheet and Plate – Buy ...

Buy Metal Online – 304 Stainless Steel Sheet and Plate – Order Large or Small Quantity Online – Cut to Size Stainless Sheet and Plate – No Minimum Order

304 Stainless Steel Sheet Suppliers| ASTM A240 grade 304 ...

Wholesaler of EN 1.4301 Stainless Steel Sheet , Stainless Steel 304 Sheets Supplier, 304 Stainless Sheet Suppliers, SA 240 Gr 304 traders in India, ASME SA 240 Type 304 exporter in India, Type 304 UNS S30400 distributor in India, SS 304 Sheet Price List, check SS 304 Sheet Price Per kg, ASTM A240 Stainless Steel 304 Sheet suppliers in India, 304 Grade Stainless Steel Sheet Supplier, Stainless ...

304 Stainless Steel Sheet #8 Mirror | Stainless Supply

304 stainless steel sheet #8 mirror has a non-directional finish that virtually looks like a mirror. 304 stainless steel sheet #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. 304 stainless steel sheet #8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.

Differences between SS304 and SS316 stainless steel

Differences between SS304 and SS316 stainless steel. adv. A discussion started in 2000 but continuing through 2018. 2000. Q. We are presently quoting a project that requires a design suitable for operation in a high saline environment.

304 Stainless Steel Sheet #8 Mirror | Stainless Supply

304 stainless steel sheet #8 mirror has a non-directional finish that virtually looks like a mirror. 304 stainless steel sheet #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. 304 stainless steel sheet #8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.

304 Stainless Steel Sheet Suppliers| ASTM A240 grade 304 ...

Wholesaler of EN 1.4301 Stainless Steel Sheet , Stainless Steel 304 Sheets Supplier, 304 Stainless Sheet Suppliers, SA 240 Gr 304 traders in India, ASME SA 240 Type 304 exporter in India, Type 304 UNS S30400 distributor in India, SS 304 Sheet Price List, check SS 304 Sheet Price Per kg, ASTM A240 Stainless Steel 304 Sheet suppliers in India, 304 Grade Stainless Steel Sheet Supplier, Stainless ...

304 Stainless Steel Sheet, Coil, Plate Supplier ...

Stainless Steel 304 Sheets, Plates, Coils. Stainless Inox is one of the leading Supplier, Exporter and Stockholders of Stainless Steel 304 Sheets, Plates and Coils in Dubai, UAE that is being made up from High Quality of Standard Raw Materials.

Ss304 Steel Sheet, Ss304 Steel Sheet Suppliers and ...

Alibaba offers 3,163 ss304 steel sheet products. About 37% of these are stainless steel sheets, 6% are steel sheets, and 1% are steel strips. A wide variety of ss304 steel sheet options are available to you, such as jis, astm, and aisi.

304 SS Sheet - 304 Stainless Steel Sheet Latest Price ...

Find here 304 SS Sheet, 304 Stainless Steel Sheet manufacturers, suppliers & exporters in India. Get contact details & address of companies manufacturing and supplying 304 SS Sheet, 304 Stainless Steel Sheet across India.

Stainless Steel 304 - SS 304 Sheet Manufacturer from Mumbai

SS 304 SHEET (FINISH MIRROR) 1mm x 8ft x 4ft - Rs. 215/Kg OFFER VALID TILL STOCK LASTS The range of steel sheets which we produce is made of high graded Stainless Steel 304 Sheets. With various dimensional specifications, these sheets find wide applications in manufacturing and fabricating engineering products.

304 stainless steel price per kg in India, SS 304 supplier

Stainless Steel 304 suppliers in Mumbai, SS 304 material properties, Stainless Steel 304 Products, SS 304 material stockist in India. check Stainless Steel 304 chemical composition, Stainless Steel 304 weight calculator, 304 Stainless Steel price per kg in India

Discount Steel – 304 Stainless Steel Sheet and Plate – Buy ...

Buy Metal Online – 304 Stainless Steel Sheet and Plate – Order Large or Small Quantity Online – Cut to Size Stainless Sheet and Plate – No Minimum Order

SAE 304 stainless steel - Wikipedia

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18–20%) and nickel (between 8–10.5%) metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic.Corrosion resistance·

Stainless Steel Blanks, Flats, Bars, Plates, and Sheet ...

Opt for stainless steel stock including stainless steel blanks, flats, bars, plates and sheet stock from Grainger to help improve your firm’s productivity. Shop a precision stainless steel blank assortment in squares and rectangles that have guaranteed tolerances and are machine ready, so they increase throughput by reducing your prep and ...

Perforated Metal - SUS304, SUS316, SUS316L, SUS430

Perforated sheet, SS 304, 1.5 mm sheet thickness, 10 mm hole diameter, size: 1 m × 10' long. Stainless steel perforated sheet with staggered round holes. Stainless steel perforated sheet with …

Stainless Steel Sheet-Type 304-Type 316 - Cut2Size Metals

Stainless steel sheet is available in Type 304 and Type 316. Type 304 can be easily roll-formed or bent, and its excellent corrosion resistance and weldability make it one of the most popular grades. Type 316 is a high corrosion resistance alloy, providing greater resistance to pitting-type corrosion.

Stainless Steel - Grade 304 (UNS S30400)

304 is the standard "18/8" stainless steel, as well as being the most widely used and versatile of all the stainless grades. It also has excellent forming and welding properties. Some applications include food processing equipment, kitchen benches, fasteners, springs, heat exchangers etc.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.