Tel: +86-371-86151827

en10025 2 s275j0 hr plate

Steel grade:en10025 2 s275j0 hr plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

en10025 2 s275j0 hr plate Introduction

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

EN 10025-2 S275J0 high strength structural steel plate ...

EN 10025-2 S275J0 High Yield Strength Structural Steel Plate . J2 symbol -20 temperature impact test . S275J0 Characteristic. S275J0 is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties.

EN10025 2 S235JR HR plate - thehandler.nl

EN10025 2 S235JR HR plate, steel,Hot sell EN10025 2 S235JR HR plate, pressure vessel steel plate grades stock in China,China EN10025 2 S235JR HR plate, pressure vessel steel plate grades factory. Keeps more than 10,000 tons hot rolled and cold rolled EN10025 2 S235JR HR plate, pressure vessel steel plate grades in stock each month.

EN10025 2 S235J0 HR plate - pressure vessel steel plate grades

En10025 2 S235j0 Carbon High Strength Steel Plate. China EN10025 2 S235J0 HR plate sheet application Carbon S235J0 steel manufacturer,S235J0 competitive price steel plate Leave a Message Get a price EX-Stock Promotion Center BS EN10025-2 S235J0 is a kind of non-alloy structure steel . Steel grades - Wikipedia.

EN10025-2 S275J0, S275J0 Hot Rolled Steel Plate steel ...

EN10025-2 S275J0 steel is a non-alloy hot rolled structural steel. Bebon will offer EN10025-2 S275J0 hot rolled steel plate with large stock. We can provide S275J0 hot rolled steel plates thickness up to 220mm.

Steel Plate EN10025-2 - steelplatesforsale

Steel Plate EN10025-2 Grade S235J0 S235JR S275JR S235J2 S275J2 S355J0 S355JR S355K2 in Large Stock. Mechanical and chemical properties of EN10025-2 S235J0 Chemical composition % MAX THICKNESS(MM) C Mn Si P S N Cu ≦40 0.17 1.4 ~ 0.03 0.03 0.012 0.55

S275J0,S275J0 STEEL,S275J0 PLATE - Mild steel plate ...

S275J0 steel is a kind steel grade under steel standard EN 10025-2.S275J0 steel plate is mainly used for steel structural buildings,frames and other steel body.S275J0 steel plate,J0 is for low temperature impacting test under zero centigree.

EN10025 3 S275N HR plate - steelsupplyonline

EN10025 3 S275N HR plate. We are mainly engaged in R&D and production of steel product and steel machining,the EN10025 3 S275N HR plate and services have covered in more than 100 countries around the world,provide the steel procurement One-Stop solutions for customers.With decades' development,During the past 18 years since 2000, BBN not only shared 2000000 tons steel with …

EN10025-2 s235jr s275jr s355jr s355 j2 Steel Plate

EN10025-2 steel plate Standard main steel grade: S235JR, S235J0, S235J2, S420J0, S355J2, S355K2, S355JR, S355J0, S275J0, S275J2 and so on. Click to get more.

EN10025-2 S275J0, S275J0 Hot Rolled Steel Plate steel ...

EN10025-2 S275J0 steel is a non-alloy hot rolled structural steel. Bebon will offer EN10025-2 S275J0 hot rolled steel plate with large stock. We can provide S275J0 …

Steel Plate EN10025-2 - steelplatesforsale

Steel Plate EN10025-2 Grade S235J0 S235JR S275JR S235J2 S275J2 S355J0 S355JR S355K2 in Large Stock. Mechanical and chemical properties of EN10025-2 S235J0 Chemical composition % MAX THICKNESS(MM) C Mn Si P S N Cu ≦40 0.17 1.4 ~ 0.03 0.03 0.012 0.55

EN10025 2 S235J0 HR plate - pressure vessel steel plate …

En10025 2 S235j0 Carbon High Strength Steel Plate. China EN10025 2 S235J0 HR plate sheet application Carbon S235J0 steel manufacturer,S235J0 competitive price steel plate Leave a Message Get a price EX-Stock Promotion Center BS EN10025-2 S235J0 is a kind of non-alloy structure steel . Steel grades - Wikipedia.

En10025 2 S275j0 Hot Rolled Steel Coil

S275J0 steel is a kind steel grade under steel standard EN 10025-2.S275J0 steel plate is mainly used for steel structural buildings,frames and other steel body.S275J0 steel plate,J0 is for low temperature impacting test under zero centigree. ... S235jr Hr Coil - steelsupplyonline.

EN10025,S235J0,S235JR,S275J0…

astm standard hot rolled steel coil,astm coils, hr coils s izes, dimensions, properties,. coils manufactured according to . 1.standard:en10025. 2.grade: s235j0,s235jr ...

Beverly Steel - S275JR Steel Plate

ASME SA387 Gr 12 Class 2 and ASTM A387 Gr11 Cl2 Chrome Moly Steel Plate; ASTM A387 Gr91 Class 2 and ASME SA387 Gr91 Class2 Chrome Moly Alloy Steel Plate; S690QL High Strength Quenched and Tempered Structural Steel; ... S275JR, S275J0 and S275J2 EN10025-2 standard min thickness 5mm up to max thickness 390mm.

EN10025 3 S275N HR plate - steelsupplyonline

EN10025 3 S275N HR plate. We are mainly engaged in R&D and production of steel product and steel machining,the EN10025 3 S275N HR plate and services have covered in more than 100 countries around the world,provide the steel procurement One-Stop solutions for customers.With decades' development,During the past 18 years since 2000, BBN not only shared 2000000 tons steel with …

EN10025 S275j0 H beam steel ----Katalor Enterprises

EN 10025 S275j0 H beam steel is a kind of common carbon structural steel, can be used in constructional , tank, building , bridge, machine . The material EN10025-2 S275J0 H beam steel we offer is super heavy steel plate , and the thickness can reach 600mm .

EN 10025-2 S235JR high strength structural steel plate ...

EN 10025-2 S235JR high strength structural steel plate 2013年8月28日 by admin . Steel Grade: S235JR ( 1.0038) Related grades: S235JR, S235J 0, S235J 2 S275JR, S275J0, S2 7 5J2, S 35 5J R, S355J 0, S355J 2, S355 K 2, S 450J0, S235JR G3 . ... « EN 10025-2 S275J0 high strength structural steel plate.

S235JR S275JR S275J0 S355JR S355 steel plate

EN10025-2 s235jr s275jr s355jr s355 j2 Steel Plate. EN10025-2 steel plate Standard main steel grade: S235JR, S235J0, S235J2, S420J0, S355J2, S355K2, S355JR, S355J0, S275J0, S275J2 and so on. Click to get more. Learn more

EN 10025-2 S275J2 high strength structural steel plate ...

EN 10025-2 S275J2 high strength structural steel plate 2013年8月28日 by admin . Steel Grade: S275J2 ( 1.0145) Related grades: S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S 35 5J R, S355J 0, S355J 2, S355 K 2, S 450J0, S275J2 G3 ... EN 10025-2 S275J0 high strength structural steel plate …

EN 10025 S275J0 steel,EN 10025 S275J0 steel steel plate…

EN 10025 S275J0 steel equivalent grade: S275J0 steel plate/sheet is in EN 10025 standard, the material number is 1.0143. The equivalent grades of S275J0 steel are DIN 17100 St 44-3 U, NFA 35-501 E 28-3, UNI 7070 Fe 430 C, BS 4360 43 C, UNE 36.080 AE 275 C, ASTM A 578 Gr. 70.

EN10025 S275JR S355JR Hot Rolled Steel - shopmava.in

EN10025-2 s235jr s275jr s355jr s355 j2 Steel Plate. EN10025-2, Hot Rolled Products of Structural Steels Part 2: Technical delivery conditions for non-alloy structural steels EN10025-2 is Standard specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.