Tel: +86-371-86151827

0 35 0 5 mm cold rolled silicon steel sheet ei 41 3

Steel grade:0 35 0 5 mm cold rolled silicon steel sheet ei 41 3

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: []

0 35 0 5 mm cold rolled silicon steel sheet ei 41 3 Introduction

27G120 M4 Cold Rolled Grain Oriented Electrical Steel ...

27G120 M4 Cold Rolled Grain Oriented Electrical Steel , Crgo Silicon Steel Sheet . Description: Cold Rolled Non Oriented Electrical Steel is steel with silicon added to it. The addition of silicon to steel increases its electrical resistance, improves the magnetic flux strength, and reduces the steel…

Silicon Steel Products - baosteel

Medium & low-grade non-oriented silicon steel is manufactured into various cores by welding or riveting after sheet punching. The silicon steel product of Baosteel can be widely used in electrical equipment manufacture of medium & small industrial electric motors, compressors for household appliances, power transformers, welding machine ...

Cold Rolled Grain Oriented Ei-162 Electrical Steel Sheet ...

Cold Rolled Grain Oriented Ei-162 Electrical Steel Sheet Coils , Find Complete Details about Cold Rolled Grain Oriented Ei-162 Electrical Steel Sheet Coils,Cold Rolled Grain Oriented Electrical Steel Coils,Ei Silicon Steel Sheet,Cold Rolled Ei Silicon Steel Sheet from Supplier or Manufacturer-Jiangyin Hongsheng Electric Co., Ltd.[PDF]

Section 1 Identification - United States Steel Corporation

Hot or Cold Rolled Steel Sheet/Strip and Hot Rolled Skelp USS IHS No.: 52297 Rev. 8/18 Page 3 of 9 Section 7 - Handling and Storage 7(a) Precautions for Safe Handling: Not applicable for Hot or Cold Rolled Steel Sheet/Strip and Hot Rolled Skelp as sold/shipped, however further processing (welding, burning, grinding, etc.) with the potential for generating high concentrations of airborne ...

0.060" (16 GA) ASTM A1011 Hot Rolled STEEL SHEET - Online ...

Hot Rolled Steel Sheet A1011 (0.060" - 16 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization, it can resist corrosion well.

Silicon Steel Sheet, Silicon Steel Sheet Suppliers and ...

Alibaba offers 24,571 silicon steel sheet products. About 23% of these are steel sheets, 10% are transformers, and 8% are silicon steel. A wide variety of silicon steel sheet options are available to you, such as gb, aisi, and astm.

Cold Roll Mild Steel Sheet A366/1008 - onlinemetals

Cold Roll Mild Steel Sheet A366/1008 Part #: 20183. 0.105" (12 GA) A-366/1008 Cold Roll Sheet is commonly referred as the “commercial quality” of cold rolled steel sheets. It offers very good formability and comparatively high strength. Its surface finish makes it a better alternative to hot rolled steel.[PDF]

Section 1 Identification - United States Steel Corporation

Silicon 7440 -21 3 231 130 8 ≤2.0 ... •Inhalation: Hot or Cold Rolled Steel Sheet/Strip and Hot Rolled Skelp as sold/shipped is not a likely form of exposure. However, during further processing (welding, grinding, burning, etc.). If inhaled: Remove person to fresh air and keep comfortable for breathing. If …

Prime CRGO Cold Rolled Grain Oriented Silicon Steel Coil ...

Prime CRGO Cold Rolled Grain Oriented Silicon Steel Coil Sheet, US $ 1.7 - 3.5 / Kilogram, Oriented Silicon Steel, Cold Rolled, 0.23*1100mm,0.35*1200mm.Source from Shanghai Biaoxing Metal Material Co., Ltd. on Alibaba.

China Prime CRNGO 0.5mm Cold Rolled Silicon Steel Sheet …

Crngo Coils Supplier, Crngo Coils Supplier Suppliers and ...China Prime CRNGO 0.5mm Cold Rolled Silicon Steel Sheet 50W470 . US $720-880 / Ton . ... Tags: China Prime Crngo 0.5mm | Silicon Steel Sheet 50w470 . Energy Saving cold rolled CRNGO silicon steel price . US $350-600 / Metric Ton . 25 Metric Tons (Min. Order) 3 YRS Rogo ... China Prime Quality CRNGO Silicon Steel Coil for Iron Core .[PDF]


Hot rolled steel sheet(SPH1~8) Cold rolled steel sheet(SPC1~3) Steel sheet for deep drawing Steel sheet for building structures(SS330) Steel sheet for building structure(SS400) 26 or more 26 or more 30~35 27~36 33~42 28 or more Buckling load P 28 or more 28~32 33~44 41~52 Steel 0.1% C 〃 0.2% C 〃 0.3% C

Cold Rolled Steel Sheet & Coil | Alliance Steel› ProductsAlliance Steel offers a variety of cold rolled steel products and value-added services to meet customer needs. Alliance Steel’s cold rolled steel service capabilities include slitting, shearing, blanking, leveling, degreasing and brushing and metallurgical support. Contact us today for information and availability.

China Cold Rolled Non Grain Oriented Silicon Steel Sheet ...

Silicon, Silicon Steel, Silicon Steel Coil manufacturer / supplier in China, offering Cold Rolled Non Grain Oriented Silicon Steel Sheet Iron Core, cold rolled non-oriented silicon electrical steel coil, Competitive Price Color Coated Galvalume Metal Steel Coils and so on.[PDF]

PowerCore™ Electrical Steel Our Products - ThyssenKrupp

ThyssenKrupp Electrical Steel India 3 Application Engineering 4 Non Grain Oriented Electrical Steel PowerCore™ 5 ... is one of the cold rolled electrical steel manufacturer in India. A leader and a name synony-mous with quality and customization. The company ... 0.35 35C270 1.10 2.60 1.63 220 ± 20 440 ± 30 530 ± 30 Min 8

Cold Rolled Steel Sheet | Cold Rolled Steel Plate

Cold Rolled Steel Sheet Cold rolled steel sheet is, essentially, hot rolled steel that has been further processed to increase its strength and strength-to-weight ratio. In general, cold rolled steel sheet can hold tighter tolerances than hot rolled when machined or otherwise fabricated, and provides a better overall surface finish.

M15 M19 M22 M27 M36 AK STEEL 0.36mm Non-Oriented ...

Quality AK Silicon Steel manufacturers & exporter - buy M15 M19 M22 M27 M36 AK STEEL 0.36mm Non-Oriented Electrical Steel from China manufacturer.

Electrical Steel, Electrical Steel Suppliers and ...

Brand Name BOOMING STEEL Commodity High Quality 50H470 Cold Rolled Non Grain Oriented Silicon Steel Standard ASTM, BS, DIN, GB, JIS,etc. Nominal Thickness 0.2/0.35/0.50mm Nominal Width Customer Requirement Length Any Length Based on Coil Weight or by Required Application Suitable for different kinds of electric motors,EI lamination and so on Product Parameters Factory map Buyer …

Electrical steel - Wikipedia

Electrical steel made without special processing to control crystal orientation, non-oriented steel, usually has a silicon level of 2 to 3.5% and has similar magnetic properties in all directions, i.e., it is isotropic. Cold-rolled non-grain-oriented steel is often abbreviated to CRNGO.[PDF]

Stainless steel plate, sheet and strip for pressure …

requirements, test methods, inspection rules, package, marks and product quality certificates of Stainless steel plate, sheet and strip for pressure equipments. This standard applies to hot-rolled, and cold-rolled stainless steels plates, sheets and strips (including sheets cut from coils) that the widths less than 600mm for pressure equipments.

Customized EI Core Suppliers and Manufacturers - EI Core ...

One Phase EI Silicon Steel Sheet with Holes ONE PHASE EI SILICON STEEL SHEET WITH HOLES Introduction: EI silicon steel core is made by Cold-rolled non-oriented electrical silicon steel sheet (CRNGO) or Cold-rolled oriented electric silicon steel sheet (CRGO), the thickness is from 0.23mm-0.5mm, As a strategic partner...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
0.3-3.0 mm
coil or as per requirement.
coil or as per requirement.
No.1 or 1D
GB/T4237-2015 ASTM A240/A240M JIS G4304
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.


Please send your processing requirement/ the drawings to or leave a message below. Our professional after-sales personnel will response you in 24 hours.