Tel: +86-371-86151827

astm a517 grade q steel plate distributor

Steel grade:astm a517 grade q steel plate distributor

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a517 grade q steel plate distributor Introduction

ASTM A517 Grade Q|A517 Gr.Q|A517GrQ|STEEL PLATE__Steel ...

Gangsteel is specialized in supplying ASTM A517 steel plate in A517 grade Q,A517 Gr.Q,A517 Gr Q A517 Gr.Q,A517 Grade Q,A517GrQ

ASTM A517 Grade Q steel plate distributor - pressure ...

ASTM A517/A517M Gr.Q steel is a kind of high yield strength alloy steel plate.A517 Grade Q alloy steel plate under ASTM Standard,The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched. ASTM A517 Gr.Q China pressure vessel plate distributor[PDF]

Plate - ArcelorMittal

Available Grades ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical ...

supplier of a517 grade q steel plate,A36,Q235B,Q345B steel ...

Plate - usa.arcelormittalArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical Applications

ASTM A517 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

ASTM A514 Steel Plate - Grade B, E, F, H, Q, S | Leeco ...

leecosteel› …› Alloy Quenched & Tempered (Q&T) Steel PlateFor over 130 years, Leeco Steel has distributed ASTM A514 plate steel that is most commonly used as a structural steel in building construction, for cranes or other large machines supporting heavy loads. ASTM A514 steel plate has a strength of 100 ksi/690 MPa. We offer A514 heavy steel plates various thicknesses, lengths, and widths to meet your specifications.

ASTM A514 Grade Q steel distributor - pressure vessel ...

Main Products: ABS AH36 Shipbuilding Steel Plate, ASTM A537 Class 1, SA302 Grade B ASTM, DNV FH32 Steel Material, ASTM A514 Grade Q Steel Plate, A517 Grade Q Steel Plate, A299 Grade A ASTM, ASME SA299 Grade B, P355ML Steel Plate, S460N Steel Plate, Grade Of Mild Steel C - …

Standard Specification for Pressure Vessel Plates, Alloy ...

A517 / A517M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered Charpy V-Notch impact test~ pressure vessels~ high-strength steel~ steel plates~

ASTM A514 Alloy & Abrasion Resistant Steel Plate | Chapel ...

Alloy & Abrasion Resistant Steel Plate. ASTM A514. ... ASTM A131 A&B / ABS A&B ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36 API 2H Grade 50 ASTM A633. PVQ Steel Plate . ASTM A516/ ASME SA516 ASTM A537/ ASME SA537 ASTM A283/ ASME SA283 ASTM A285/ ASME SA285. Armor & Ballistic Steel Plate .

ASTM A514 Grade Q steel distributor - pressure vessel ...

Main Products: ABS AH36 Shipbuilding Steel Plate, ASTM A537 Class 1, SA302 Grade B ASTM, DNV FH32 Steel Material, ASTM A514 Grade Q Steel Plate, A517 Grade Q Steel Plate, A299 Grade A ASTM, ASME SA299 Grade B, P355ML Steel Plate, S460N Steel Plate, Grade Of Mild Steel C - …

ASTM A517 Grade Q steel plate distributor - pressure ...

ASTM A517/A517M Gr.Q steel is a kind of high yield strength alloy steel plate.A517 Grade Q alloy steel plate under ASTM Standard,The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched. ASTM A517 Gr.Q China pressure vessel plate distributor

ASTM A517/ A517M Grade Q Pressure Vessel Steel Plate

TJC Steel( owned by TJC Iron&Steel (Group) Co., Limited) is the most competitive manufacture and supplier of ASTM A517/ A517M Grade Q Pressure Vessel Steel Plate in China. For more details, please contact us freely. Click Here to See PDF Details for ASTM A517/ A517M Grade Q Pressure Vessel Steel Plate

A517 Grade H Boiler Steel in West Africa - rdblegend.co.in

For plates 2.5 inch to 6 inch thick, the mechanical properties are 100-KSI to 130-KSI tensile strength, 90-KSI minimum yield strength, and 16 percent elongation. ton price of ASTM A517 Grade Q low alloy high strength steel plate a517 grade q steel plate, low alloy steel plate, high strength steel plate sa517 grq,steel plate sa517 grade q, steel ...

A517 Grade Q Exporters, Suppliers, Wholesalers ...

A517 Grade Q product offers from exporters, manufacturers, suppliers, wholesalers and distributors globally by price, quantity, order, delivery and shipping terms, country - Page 1

ASTM A514 Alloy & Abrasion Resistant Steel Plate | Chapel ...

Alloy & Abrasion Resistant Steel Plate. ASTM A514. ... ASTM A131 A&B / ABS A&B ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36 API 2H Grade 50 ASTM A633. PVQ Steel Plate . ASTM A516/ ASME SA516 ASTM A537/ ASME SA537 ASTM A283/ ASME SA283 ASTM A285/ ASME SA285. Armor & Ballistic Steel Plate .

ASTM A517 - SSAB

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.[PDF]

Plate - usa.arcelormittal

Available Grades ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical ...

ASTM A517 Grade F|A517 Gr.F|A517GrF|STEEL PLATE__Steel ...

ASTM A517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. The steel shall be killed and shall conform to the fine austenitic grain size requirement of Specification A20/A20M.

A514 Steel Plates manufacturers in india| ASTM A514 Steel ...

Victor Steel is one of the leading suppliers of A514 Steel Plates.we have one of the largest ready stocks of ASTM A514 Alloy Steel Plates in India.specialized in supplying A514 Plate. A514 Steel Plates Price US $300-800 /Ton

ASME SA514 Gr.B Plate, ASTM A514 T-1 steel, ASTM A514 ...

SA514 Grade B High-Yield-Strength Quenched & Tempered Steel Plate Manufacturer in India,ASME SA514 Grade B Steel Plates Dealer , T-1 ASTM A514 carbon structure steel plates Stockist, ASTM A514 T-1 High Strength Steel Plate Distributors, Quenched & Tempered ASME SA514 Plate Exporter, ASTM A514 Grade S Plate Dealer,SA514 Grade B Plates Manufacturer & Suppliers.

ASTM A514 Structural Steel Plate, A514 Grade A Plate, ASTM ...

Conquest Steel and Alloys is India Based Leading Supplier and Stockist of High Quality and Speciality Steel Such as ASTM A514 Structural Steel Plate, ASTM A514 High Strength Steel Sheet Plates Available in Ready Stock of ASTM A514 Abrasion Resistant Steel Plates …

ASTM A514 GRADE Q - conqueststeelalloys

CONQUEST STEEL & ALLOYS - Exporter, Importer, Manufacturer, Distributor, Supplier, Trading Company of ASTM A514 GRADE Q based in Mumbai, India

ASTM-A514 - SSAB high-strength steel - sheet, plate, coil ...

Grades: A514 GR B, A514 GR H, A514 GR E, A514 GR F, A514 GR Q, A514 GR S. ASTM A514. The ASTM A514 specification is the Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding used in applications where Yield Strengths of ≥ 100 ksi are required for plates up to 2-1/2" thick, inclusive.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.