Tel: +86-371-86151827

s31700 hot dipped steel sheet in coil grade 33

Steel grade:s31700 hot dipped steel sheet in coil grade 33

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s31700 hot dipped steel sheet in coil grade 33 Introduction

[PDF]

GALVANIZED STEEL Grade Data Sheet - cmetals

GRADE 33 Mechanical Properties Chemical Composition ... ** Maximum thickness suitable for organic coil coating is 0.0575”. GRADE 37 Mechanical Properties Chemical Composition ... Grade Data Sheet Galvanized Steel - hot-dip zinc coated structural steel with guaranteed minimum yield strength.

Hot Dipped Galvanized Steel Sheet & Coil | Alliance Steel

alliancesteel.net› Products› Coated SteelProtect against corrosion with hot dipped galvanized steel products from Alliance Steel. Hot dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment. The finish is applied by passing the steel through a molten bath of zinc at a high temperature.[PDF]

TruZinc Steel Grade 33 Grade Data Sheet - Steelscape, LLC

TruZinc® Steel Grade 33 Grade Data Sheet General Description TruZinc® Steel Grade 33 - hot-dip zinc coated structural steel with a zero spangle surface and guaranteed mini- mum yield strength of 33 ksi with good ductility. Typical Uses Roll-formed roofing, siding and steel studs.

Iron sheet steel coil hot dip steel sheet

Steel sheet in coils - Transport Information Service (TIS) - … tis-gdv.de› Home› Cargo information› Cargo site mapBlack plate (black iron sheet): hot-rolled, nondescaled sheet for second grade applications placing no particular demands on surface quality Galvanized sheet: steel sheet with a zinc coating.The coating increases the utility value of the sheet.

Hot Dipped Galvanized Steel Coil Sheet Supplier China ...

It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristic. Usually galvanized steel sheet and galvanized steel coil process and specifications are basically the same. Hot-dip galvanizing is the process of applying a protective zinc coating to steel sheet or iron sheet…User rating: 4.5/5

Galvanized Steel Sheet - Galvanized Steel Coil | Curtis ...

curtissteelco› Sheet & CoilASTM Galvanized Steel Sheet & Coil. Curtis Steel is a leading supplier of galvanized steel sheet & coil. Galvanized steel is defined as a carbon steel sheet coated with zinc on both sides. There are two main processes used to produce galvanized steel: continuous hot dipping and electro-galvanizing.Location: 6504 Hurst St, Houston, 77008, TX

Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel ...

Hot Dip Galvanize Steel. We are a leading Manufacturer of zero spangle galvanized steel coil, galvalume steel coils, galvanized steel strips, galvanized strip, galvanized steel tapes and galvanized steel strip from Mumbai, India.[PDF]

HOT DIP GALVANIZED - AK Steel

HOT DIP GALVANIZED STEEL, known as ZINCGRIP® Steel, is continuously coated on both sides with a zinc coating. The hot dip process, pioneered by AK Steel, provides a tight metallurgical bond between the steel and the coating. This process results in a material with the strength and formability of steel plus the corrosion protection of zinc.

Carbon Steel - Flat Rolled

Strip Steel. Strip Steel is produced from a hot rolled pickled strip. The coil is then reduced at a cold rolled steel mill to its final thickness. The final product typically consists of cold rolled steel that has been cut into specific widths, frequently interleaved with paper or …

BBN Steel Supply s31700 good stainless plate aisi 321,A36 ...

s31700 stainless steel plate - alibaba. Alibaba offers 160 s31700 stainless steel plate products. About 19% of these are stainless steel sheets. A wide variety of s31700 stainless steel plate options are available to you, such as aisi… Stainless Steel 317 Sheets, UNS S31700 Plates Supplier ...[PDF]

Product Type & Applicable Specifications Description …

Description Hot-Dip Galvanized (HDG) Flat Steel (Coil/Strip/Sheet) Product Size & Form in Hot-Dip Galvanized Material 0.28 - 4.00 0.28 - 4.00 0.30 - 4.00 0.30 - 4.00 900 - 1500 650 - 1500 30 650 - 1500 Coil form / Sheet Coil form / Sheet Coil form / Sheet Coil form / Sheet Mill Edge Trimmed Edge Slitted Coil Trimmed Edge[PDF]

FLAT ROLLED PRODUCTS - ussteel

Hot Rolled Sheet Steel is an unprocessed, mill edge coiled product and does not include any processing such as temper rolling, tension leveling, pickling, oiling or side trimming. Hot Rolled products are produced to ASTM Specifications A1011, A659, A635 or A1018.

hot rolled hot dip steel sheet metal

DATA SHEET: 08-03-18 GB8421DOMEX Domex 700 MC Hot rolled, extra high strength, cold forming steel · PDF PRODUCT Domex cold forming steels are thermo-mechanically rolled in modern plants where the heating, rolling and cooling processes are carefully controlled.

ASTM A653 Hot-dip Galvanized Structural Steel Sheet | Linkun

LINKUN supply and stock extensive inventory of galvanized sheet and coil, especially ASTM A653 Hot Dipped Galvanized sheet ASTM A653 Grade SS33 with min spangle surface.

Steel Coils - Commerce Steel Corp.

Commerce Steel Corp, headquartered in metro Detroit, provides a full line of sheet and coil steel ranging in thickness from 30 gauge through 3/8”. We have a large inventory of steel coils in standard grades C1006 through C1074 including IF material as well as high strength grades from Grade 40 to Grade 80 in HSLA and Structural Steel.[PDF]

ZINCALUME Steel Grade 33 Grade Data Sheet - …

ZINCALUME® Steel Grade 33 Grade Data Sheet General Description ZINCALUME® Steel Grade 33 - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 33 ksi with good ductility. Typical Uses Roll-formed roofing and siding.

Galvanized Steel | Sheet Metal Supplier | Metalwest

Galvanized steel is a hot-dipped coated metal that provides customers with better resistance to corrosive environments. To create galvanized steel, cold rolled steel is submerged into a molten zinc bath, known as the hot-dip process (galvanization can also be achieved through continuous galvanizing).

Hot rolled steel Manufacturers & Suppliers, China hot ...

hot rolled steel manufacturer/supplier, China hot rolled steel manufacturer & factory list, find qualified Chinese hot rolled steel manufacturers, suppliers, factories, exporters & …

Galvanized Steel – Berlin Metals

berlinmetals› ProductsBoth types, “A” and “G” are available on a full range of steel grades from CS (Commercial Steel) through EDDS (Extra Deep Drawing Steel). These grades have varying ability to be formed. Hot-Dipped Galvanized is produced to meet ASTM A 653 Specifications, “General Requirements for Steel Sheet Zinc Coated by the Hot-Dip Process”.

Quality Galvanized Steel Coil & Galvalume Steel Coil ...

We are good quality supplier of Galvanized Steel Coil, Galvalume Steel Coil Prepainted Steel Coil from China. Hot Dip Galvanized Steel Sheet / Q195 , Q235 Grade Galvanized Steel Roll SGCC Corrugated Aluzinc Steel Coils DX51D + AZ Anti Erosion For Building Materials

Hot DIP Dx51d Z100 Steel Coil Galvanized Steel Sheet

Steel Sheet, Steel Coil, Steel manufacturer / supplier in China, offering Hot DIP Dx51d Z100 Steel Coil Galvanized Steel Sheet, 28 Gauge Cold Rolled Color Coated Corrugated Steel Roof Sheet, 30gauge Dx51d Prepainted Galvanised PPGI Steel Coil for Roof Tile and so on.

Ddq Hot Dip Steel Coil, Ddq Hot Dip Steel Coil Suppliers ...

Alibaba offers 145 ddq hot dip steel coil products. About 100% of these are steel sheets, 1% are stainless steel sheets. A wide variety of ddq hot dip steel coil …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.