Tel: +86-371-86151827

water construction used steel sheet pile

Steel grade:water construction used steel sheet pile

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

water construction used steel sheet pile Introduction

Sheet Pile Wall Construction - railsystem

Sheet Pile Wall Construction. Sheet pile walls are retaining walls constructed to retain earth, water or any other filling materials. These walls are thinner in section compared to masonry walls. Sheet pile walls are generally used for following: Water front structures, i.e. in building wharfs, quays and piers. Building diversion dams, such as ...

LBFoster US | Steel Sheet Pile

Steel sheet piling is classified in two construction applications, permanent and temporary. A permanent application is "stay-in-place" where the sheet piling wall is driven and remains in the ground. A temporary application provides access and safety for construction in a confined area. Once the work is completed, the sheet piling is removed.

SHEET PILE WALLS - The Constructor

When timber sheet piles are used in permanent structures above water level, they require preservative treatment and even, but still their life span is relatively short. Timber sheet piles are joined to each other by tongue and grove joints. Timber sheet piles are not suitable for soils consisting of stones, as the stone would dislodge the joints.

New and Used Z-Sheet and Flat Sheet Steel Pile for Sale ...

New, Used and Surplus Sheet Pile for Sale. Sheet piles are long structural sections with a vertical interlocking system that creates a continuous wall. The walls are most often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it …

Used Steel Sheet Pile Wholesale, Sheet Pile Suppliers ...

Alibaba offers 1,067 used steel sheet pile products. About 38% of these are other steel profiles, 25% are steel sheets, and 7% are metal building materials. A wide variety of used steel sheet pile options are available to you, such as aisi, bs, and astm.

Quick Guide to Understanding Sheet Piling - setxind

When it comes to retaining earth during the piling and deep foundation process, sheet piling is the standard. It is commonly used for excavating or to provide protection from bodies of water. Sheet piling is also the most reliable and cost effective method to prevent shifts of soil or breeches of water from damaging the foundation or facility.

ESC Steel LLC - Steel Sheet Piling, Pipe Piles, H-Piles

ESC Steel Provides High Grade Steel Piling Products to USA at competitive prices and termssuch as Sheet Piles, Pipe Piles, Tie Backs, H Piles & Combined Walls.

Blog | Dewatering for Basement Construction

Dewatering for Basement Construction 12 March 2016. ... Large dewatered excavation in gravel, with sides supported by steel sheet-piles. ... Water dependent feature impacts – including reducing water flow to any natural springs and wetlands that are in the vicinity of the site.

Sheet pile walls - sheet piles - sheet pile design - sheet ...

Steel sheet piles are most commonly used in deep excavations, although reinforced concrete sheet piles have also being used successfully. LEARN ABOUT HOW OUR deepEX - Deep EXCAVATION software CONSIDERS MORE THAN 200 GEOTECHNICAL AND STRUCTURAL CHECKS FOR SHEET PILE …

Cut Off Walls | Groundwater Engineering

The selection of a given exclusion method used to form a cut-off barrier will depend on the conditions and constraints on a given project. Primary constraints are desired depth of wall, ground conditions, geometry of wall (some methods can be used horizontally or inclined to the vertical, while others are limited to vertical applications), and ...

Steel Sheet Piling – Uses, Construction Steps, Advantages ...

Disadvantages of Steel Sheet Piling. The main disadvantages of steel sheet pile construction are listed below. The sections are rarely able to be used as part of a permanent structure. Permanent sheet piles will stay in the ground and act as a long-lasting retaining structure.

Cut Off Walls | Groundwater Engineering

The selection of a given exclusion method used to form a cut-off barrier will depend on the conditions and constraints on a given project. Primary constraints are desired depth of wall, ground conditions, geometry of wall (some methods can be used horizontally or inclined to the vertical, while others are limited to vertical applications), and ...

SHEET PILE WALLS - The Constructor

When timber sheet piles are used in permanent structures above water level, they require preservative treatment and even, but still their life span is relatively short. Timber sheet piles are joined to each other by tongue and grove joints. Timber sheet piles are not suitable for soils consisting of stones, as the stone would dislodge the joints.

Waterproofing Your Sheet Piling Project [iSheetPile ...

If your steel sheet pile project involves cofferdams, dewatering, tunnels, cutoff walls for site remediation, or any application where water leakage presents a challenge then iSheetPile has the solution. As a licensed dealer of WADIT®, a globally proven sheet piling interlock sealant, iSheetPile can meet all of your waterproofing needs.

Everything about sheet-pile walls: types, materials and ...

Sheet pile wall types, construction methods, advantages and disadvantages are described in this article. Sheet-pile walls are widely used for both large and small waterfront structures, ranging from small pleasure-boat launching facilities to large dock structures where …

Quick Guide to Understanding Sheet Piling - setxind

When it comes to retaining earth during the piling and deep foundation process, sheet piling is the standard. It is commonly used for excavating or to provide protection from bodies of water. Sheet piling is also the most reliable and cost effective method to prevent shifts of soil or breeches of water from damaging the foundation or facility.

Sheet Piles - Steel Piling Group

Sheet piles are used in earth retaining structures where a differential surface level is to be established. The sheet pile forms the vertical interface. Steel sheet piles are used for both temporary and permanent retaining walls. Structures include basements, underground carparks and abutments for bridges including integral bridges.

Sheet pile walls - sheet piles - sheet pile design - sheet ...

Sheet pile walls are constructed by driving sheet pile sections into the ground. Sheet piles, depending on soil conditions might be vibrated into the ground instead of being hammer driven. Sheet pile design has to consider moments and design life.

Types of Pile Foundations Based on Construction Method

Types of Pile Foundations Based on Construction Method 1. Driven Pile Foundations. Driven pile foundations can be made from concrete, steel or timber. These piles are prefabricated before placing at the construction site. When driven piles are made of concrete, they are precast. These piles are driven using a pile hammer.

Used Sheet Piling For Sale, Wholesale & Suppliers - Alibaba

About 32% of these are other steel profiles, 22% are steel sheets, and 16% are pile driver. A wide variety of used sheet piling for sale options are available to you, such as aisi, bs, and astm. You can also choose from free samples, paid samples. There are 1,234 used sheet piling for sale suppliers, mainly located in Asia.[PDF]

Evaluating the Condition of Seawalls/Bulkheads

Pile/panel and sheet piling configurations common in South Florida. Most common wall material in South Florida due to the locally available aggregate; provides service life of 30+ years if correct mix design and proper marine structural design implemented. Steel sheet piling commonly used for bulkheads/seawalls. Material provides

Permanent Basement Wall - Sheet Piling System ESC Group

Sheet pile walls can either be used in a temporary or permanent works application. When sheet piles are used in permanent works, there is a possibility of achieving a high quality finish to such an extent that outward face of steel can be painted rather than building a concrete facing wall to place in front of the sheet piles.

Steel Sheet Piling Corrosion and Protection - Pile Buck ...

Encasement of steel pilings in concrete is a common way to provide protection for both faces of sheet piling in the area extending from grade down to the average low water level, providing defense for the atmospheric, splash, and tidal zones. Encasement also provides …[PDF]

TOKYO INSTITUTE OF TECHNOLOGY - 東京工業大学

the water level, a cofferdam is built to give workers a dry work environment. Sheet piling is driven around the work site, seal concrete is placed into the bottom to prevent water from seeping in from underneath the sheet piling, and the water is pumped out. The word

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.