Tel: +86-371-86151827

color steel coils base metal alloyed coating

Steel grade:color steel coils base metal alloyed coating

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

color steel coils base metal alloyed coating Introduction

steel coil coating line coated steel coil

PPGI is pre-painted galvanised iron, also known as pre-coated steel, coil coated steel, color coated steel etc., typically with a hot dip zinc coated steel substrate. The term is an extension of GI which is a traditional abbreviation for Galvanized Iron.

PRE-PAINTED GALVANIZED STEEL COIL (PPGI) – COLOUR …

PRE-PAINTED GALVANIZED STEEL COIL (PPGL) – COLOUR STEEL COIL. Pre-Painted Galvanized is produced from the color coating line Input sheets are put into flushing, pickling phases and coated with an additives to enhance the adhesives, then, it is covered with …

aluminium zinc alloy coated steel coil

Zinc-Magnesium Coated Steel Sheets· PDF 5 Tailored Properties Zinc (Z) as a coating consists of about 99 per cent zinc and was first employed for corrosion protection of sheet steel in 1959. Aluminium-silicon coatings (AS), using an aluminium alloy containing about ten per cent silicon were introduced in

Galvanized Steel Coils / Sheets (GI) - sascosteelgroup

GALVAN- NEALED. - Steel strip and zinc react to produce Zn-Fe alloyed coating layer by thermal diffusion process. - Superior weld ability and printability compared with hot dip galvanized steel sheets. - Especially superior corrosion resistance after painting due to Fe component within the coating.

Pre- Painted Color Steel Sheet (PCM) & (VCM)

Available base metal . Galvanized steel sheet / Electrolytic galvanized steel sheet / Cold Rolled steel sheet / Galvalume steel sheet / Aluminum coated steel sheet ... Painting and backing various designs with Gravure offset print on the pre-painted steel coil. Material : CR, EGI, GI, AL, SUS ... Pre- Painted Color Steel Sheet (PCM) (VCM)

Color Pre-coated Galvanized Steel Coils Manufacturing - LCM

Color Pre-coated Galvanized Steel Coils Professional Manufacturer - LCM. Based in Taiwan, Lienchy LAMINATED METAL CO., LTD. is a Color Pre-coated Galvanized Steel Coils …

PPGI & PPGL, Prepainted Steel Coils & Sheets Manufacturer ...

The prepainted steel sheet in coil is a product obtained by subjecting a hot-dipped galvanized steel sheet, an galvalume steel sheet, or an aluminum sheet to a surface chemical treatment (coating) or a composite organic film (such as a PVC film), followed by baking and curing.. 1) PPGI also known as prepainted galvanized steel coil and color coated steel coil, with a hot dip zinc coated steel ...User rating: 4.5/5

Zinc Aluminum-Magnesium Coated Steel Sheets & Coils|Zam ...

Available Steel Grades. The corrosion property of the Zinc Aluminum Magnesium Coated Coil and it’s color steel is five times than the usual Galvalume Steel, which is solving the problem of easy to rust of color steel at the coastal areas and also addressing the issue of the short life of the color steel for the structure engineering,...[PDF]

High-Performance Equivalent Coatings Offer Superior ...

EQ coatings are supplementary coatings added to zinc-coated steel coils to enhance the corrosion resistance of the coils’ existing base coating—usually a standard zinc-based metallic coating. The EQ coating attaches to the base zinc coating and penetrates down into any of its cracks and voids.

Galvanized Steel Coils / Sheets (GI) - sascosteelgroup

GALVAN- NEALED. - Steel strip and zinc react to produce Zn-Fe alloyed coating layer by thermal diffusion process. - Superior weld ability and printability compared with hot dip galvanized steel sheets. - Especially superior corrosion resistance after painting due to Fe component within the coating.

Color Pre-coated Galvanized Steel Coils Manufacturing - LCM

Color Pre-coated Galvanized Steel Coils Professional Manufacturer - LCM. Based in Taiwan, Lienchy LAMINATED METAL CO., LTD. is a Color Pre-coated Galvanized Steel Coils …

Pre- Painted Color Steel Sheet (PCM) & (VCM)

Available base metal . Galvanized steel sheet / Electrolytic galvanized steel sheet / Cold Rolled steel sheet / Galvalume steel sheet / Aluminum coated steel sheet ... Painting and backing various designs with Gravure offset print on the pre-painted steel coil. Material : CR, EGI, GI, AL, SUS ... Pre- Painted Color Steel Sheet (PCM) (VCM)

Quality Color Coated Steel Coil & Prepainted Steel Coil ...

Wuhan Hanke Color Metal Sheet Co., Ltd. is best Color Coated Steel Coil, Prepainted Steel Coil and Galvanized Steel Coil supplier, we has good quality products & service from China.[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

● Advanced control over the coating atmo- sphere secures adhesion of the zinc to the base metal, thereby ensuring good workabil- ity. These products are used mainly in home electric appliances and building materials. Advanced control over the coating atmo- base metal, thereby ensuring good workabil-.

steel plate,steel pipe,steel coil

Cold Rolled GI PPGI Steel Coil RAL Color For Building Material. Prepainted Cold Rolled GI PPGI Steel Coil RAL Color for Building Material . Description: Pre-painted Galvanized steel is a Galvanized steel with a number of paint layers and treatments in a carefully controlled environment in a continuous coil coating …

Coated Aluminum Coil Ral Color hot selling - Zibo Camel ...

Standard export packing: 4 eye bands and 4 circumferential bands in steel, galvanized metal fluted rings on inner and outer edges, galvanized metal & waterproof paper wall protection disk, galvanized metal & waterproof paper around circumference and bore protection. Delivery Time: 15-20 days for a 20 feet container after receiving 30% deposit.

Prassas Metal Products, inc.

Metallic Coated Coil. The hot-dip process consists of passing the steel through a bath of molten zinc. The electro-galvanizing process consists of the application of a thin zinc surface coating by electrolytic disposition. The result is a thin layer of zinc, tightly adhered to the base metal through a …

Color Selections - United Steel Supply

United Steel Supply offers the WeatherXL™ paint system, a silicone polyester coil coating. WeatherXL is ideal for agricultural and industrial applications. The WeatherXL system is known for its astonishing color and gloss retention along with its superior resistance of chalking and fading.

Color Coating Coil, Color Coating Coil Suppliers and ...

Alibaba offers 14,622 color coating coil products. About 59% of these are steel sheets, 1% are metal building materials, and 1% are stainless steel sheets. A wide variety of color coating coil options are available to you, such as aisi, bs, and gb.

Color Coated Coils - Rangeen Lepit Coils Latest Price ...

We provide a comprehensive range of Color Coated Coils, which have strength of steel, corrosion resistance of metallic coating and an additional corrosion protection. These are provided by us in various dimensions and colors as required by the clients.

China Prime Pre-Painted Color Galvanized Steel Coils ...

Color Galvanized Steel Coil, Colored Galvanized Steel Coils, PPGI Color Galvanized Steel Coils manufacturer / supplier in China, offering Prime Pre-Painted Color Galvanized Steel Coils, Color Coated Galvanized Steel Coil SGCC Dx51d, Hot Dipped Galvanized Steel, Galvanized Sheet Metal and so on.

PPGI & PPGL Steel Coils|Prepainted Galvanized Coils ...

PPGI Steel Coils (also called prepainted galvanized steel coils or color coated steel coils and prepainted steel coils)have their importance and used largely in different industries. Now, you can get this advanced type of prepainted steel coil online by placing your order from anywhere in the world.

Zinc Aluminum-Magnesium Coated Steel Sheets & Coils…

Zinc Aluminum-Magnesium Coated Steel Conception. This Zinc Aluminum-Magnesium Coated Steel Sheet in Coils which is also called ZAM coated steel is our mill newly developed with coating layers of 100-450g +/-10g which owns very strong corrosion-resistant ability.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.