Tel: +86-371-86151827

2014 secondary eg ga gi ppgi gl hr cr steel coils sheets

Steel grade:2014 secondary eg ga gi ppgi gl hr cr steel coils sheets

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

2014 secondary eg ga gi ppgi gl hr cr steel coils sheets Introduction

Cr/hr Steel Coil, Cr/hr Steel Coil Suppliers and ...

high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

High Quality GA GI GL HR CR Steel Coils Sheets Super Supplier

Hr Gl Coil, Hr Gl Coil Suppliers and Manufacturers at ...high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

Eg ga gi gl hr cr Steel Coils sheets - w3s.in

Cr Hr Sheets, Cr Hr Sheets Suppliers and Manufacturers at ...high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

Secondary Eg ga gi ppgi gl - hearts-of-steel/

Secondary Gi Ppgi Wholesale, Gi Ppgi Suppliers - Alibaba. high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

Eg ga gi gl hr cr Steel Coils sheets

Steel Hr Cr Coils Sheets, Steel Hr Cr Coils Sheets ...high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

2014 Secondary Eg/ga/gi/ppgi/gl/hr/cr Steel Coils/sheets ...

2014 Secondary Eg/ga/gi/ppgi/gl/hr/cr Steel Coils/sheets, US $ 530 - 790 / Metric Ton, AISI, ASTM, BS, DIN, GB, JIS, steel, 0.12MM-1.50MM.Source from Shandong ...

High Quality GA GI PPGI GL - hearts-of-steel/

Hr Gl Coil, Hr Gl Coil Suppliers and Manufacturers at ... high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

Cr Hr Sheets, Cr Hr Sheets Suppliers and Manufacturers at ...

Alibaba offers 1,556 cr hr sheets products. About 53% of these are steel sheets. A wide variety of cr hr sheets options are available to you, such as aisi, astm.

Secondary Eg ga gi ppgi gl - hearts-of-steel/

Secondary Gi Ppgi Wholesale, Gi Ppgi Suppliers - Alibaba. high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

2014 Secondary Eg/ga/gi/ppgi/gl/hr/cr Steel Coils/sheets ...

2014 Secondary Eg/ga/gi/ppgi/gl/hr/cr Steel Coils/sheets, US $ 530 - 790 / Metric Ton, AISI, ASTM, BS, DIN, GB, JIS, steel, 0.12MM-1.50MM.Source from Shandong ...

High Quality GA GI GL HR CR Steel Coils Sheets Super …

Hr Gl Coil, Hr Gl Coil Suppliers and Manufacturers at ...high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

Secondary Cr Hr Gi Coil Sheet - Secondary Cr Hr Gi Coil ...

Dear Customer, Our company is all kinds of GI,EG,CR,HR Secondary and Overrolled Steel Sheet and Coils Export company in Korea. Our company ready stock is GI,EG,CR Secondary and Overrolled Quality Steel Sheet and Coils. Under the bellow details. 1....

2014 Secondary Eg/ga/gi/ppgi/gl/hr/cr Steel Coils/sheets ...

2014 Secondary Eg/ga/gi/ppgi/gl/hr/cr Steel Coils/sheets, , AISI, ASTM, BS, DIN, GB, JIS, SGCC, DX51D, DX52D, DX53D, DX56D, 0.5-4.0mm.Source from Shanghai Baozhuo ...

Secondary Eg ga gi ppgi gl - Henan BBN

Secondary Gi Ppgi Wholesale, Gi Ppgi Suppliers - Alibaba. high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

High Quality GA GI PPGI GL - hearts-of-steel/

Hr Gl Coil, Hr Gl Coil Suppliers and Manufacturers at ... high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details: Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

Color GI GL GA PPGI HR - srilankasports.org

HR CR GI GL PPGI PPGL . high quality secondary eg/ga/gi/ppgi/gl/hr/cr steel coils/sheets prime cold rolled steel coil 1.Production details Thickness 0.15~2.8m Width 630-1250mm Length as custom's request Technique Cold rolled Surface treatment Bare/Shot Blasted and Spray Paint or as required.

Secondary Cr Hr Gi Coil Sheet Manufacturers, Exporters ...

Al Burhan Steel Centre a pioneer in Secondary grade Flat Steel Distribution in HR, CR, GI, EG, PPGI, GL sheets & coils with an unmatched experience in online trade sourcing competitive offers with hassle free logistics & varied payment options.

EG_GA_GI_PPGI_GL_HR_CR Steel Coils_Sheets - okorder

ral 9012, ral 9014, Bathroom Fittings Malaysia, steel rebar malaysia, cr40 steel, d2 round bar, aisi 1020, labsa hs code, corten steel, q450nqr1 specification, gcr15 steel specification, aisi 5140, dimensions of a hot tube, aisi 1060, Aluminium Formwork Malaysia[PDF]

PRIME/SECONDARY STEEL COILS AND SHEETS (HR, …

PRIME/SECONDARY STEEL COILS AND SHEETS (HR, CR, GI, EG, HDG, PPGI, ETP, CRGO AND SS COIL & SHEETS) HOT ROLLED COILS / PLATE Hot Rolled Coil Hot Rolled Plate Hot Rolled Coil Product Name: Hot Rolled Coils and Plates Thickness 1.5mm to 200mm

Inquiry about EG/GA/GI/PPGI/GL/HR/CR Steel Coils/Sheets ...

weiku› …› Minerals & Metallurgy› Steel› Steel SheetsInquiry about EG/GA/GI/PPGI/GL/HR/CR Steel Coils/Sheets, there are Inquiry about EG/GA/GI/PPGI/GL/HR/CR Steel Coils/Sheets supply and demand information all over the world at weiku. Weiku is the biggest global online market.we offer the best supply information of Inquiry about EG/GA/GI/PPGI/GL/HR/CR Steel Coils/Sheets

Cnt Steel Co, . Ltd. Buyer from Viet Nam. View Company.

Wanted : Gl, Gi Eg, Ppgi, Hr, Cr, Mixed Coil And Sheets ... Dear Sirs We are now in need of secondary hr/cr/gi/ga steel sheets, coils, slitted coils, please kindly check your stock and send us your updated offers with thanks. We look forward to hearing from you soon.

Tianjin Lvrun Science And Technology Co., Ltd.

Promotional Goods Secondary Eg/ga/gi/ppgi/gl/hr/cr Steel Coils/sheets MOQ: 25 Metric Tons US $750.0 - 800.0 /Metric Ton Prepainted Aluminum Coils/ Sheet, Building Materials , Roofing Sheet, Decorations, Good Price and Quality and easy to Recycle MOQ: 20 Metric Tons US $2200 - …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.