Tel: +86-371-86151827

astm1010 grade 50 stainless plate

Steel grade:astm1010 grade 50 stainless plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm1010 grade 50 stainless plate Introduction

Standard Specification for Higher-Strength Martensitic ...

A1010 / A1010M-13(2018) Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip high-temperature service applications~ pressure vessels~ stainless steel plates~ stainless steel sheets~ stainless steel strips~[PDF]

Plate - usa.arcelormittal

(4) Duracorr cold rolled sheet and plate in coil are no longer available from ArcelorMittal USA. Table 3 Specified Mechanical Properties ASTM 1010 ASTM A240 UNS S41003 Grade 40 (Optional) Grade 50 (Standard) Ultimate Tensile Strength, Min. ksi (MPa) 66 ksi 445 MPa 66 ksi 445 MPa 70 ksi 485 MPa

USA ASTM ASTM 1010 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. ASTM 1010 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Speedy Metals - Steel Plate - Grade 50

Grade 50 Steel Plate is used when there is need for more strength per unit of weight. We can cut to any size to suit your application's needs. ... STAINLESS STEEL . ... ASTM A572 Grade 50 is considered a "workhorse" grade and is widely used in many applications. Steel mills produce channel and heavy beams with Grade 50.[PDF]

OREGON’S ASTM A 1010 BRIDGES

OREGON’S ASTM A 1010 BRIDGES Iowa DOT A1010 Steel Workshop: March 18, 2015. ... Plate Provide ASTM A1010 Grade 50 steel in accordance with ASTM A 1010 ... Preferred Plate Dimensions •Plate Lengths 240 to 480 inches •Plate Widths 84 to 99 inches. 8 . Stainless Steel Bolts Provide stainless steel bolts in accordance

ASTM SAE 1010 steel plate - Katalor Industry

ASTM - SAE A 621 CQ - SAE 1010 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's tensile strength is around 420 MPa (there is different min strength point at the different thickness.) A 621 CQ - SAE 1010 yield strength is from 170MPa to 320 MPa. (different min strength point at the different thickness.)

ASTM A1011 Hot Rolled Steel Sheet | Buy Online | Cut to ...

Buy Metal Online – ASTM A1011 Hot Rolled Steel Sheet – Order Large or Small Quantity Online – Cut to Size Hot Rolled Sheet – No Minimum Order[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 3 ASTM Specifications continued SPECIFICATION A203 Grade A A203 Grade B A203 Grade D A203 Grade E A203 Grade F Type of Steel Alloy Alloy Alloy Alloy Alloy Requirements for Delivery A20 A20 A20 A20 A20 Tensile Strength (ksi) 65/85 70/90 65/85 70/90 80/100 to 2" incl.; 75/95 over 2" Yield ...

Amazon: stainless steel plate

amazon› Search› stainless steel plateImmokaz Matte Polished 9.0 inch 304 Stainless Steel Round Plates Dish Set, for Dinner Plate, Camping Outdoor Plate, BPA Free, Pack of 2 (M) by Immokaz $27.99 $ 27 99 Prime

USA ASTM ASTM 1010 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. ASTM 1010 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 3 ASTM Specifications continued SPECIFICATION A203 Grade A A203 Grade B A203 Grade D A203 Grade E A203 Grade F Type of Steel Alloy Alloy Alloy Alloy Alloy Requirements for Delivery A20 A20 A20 A20 A20 Tensile Strength (ksi) 65/85 70/90 65/85 70/90 80/100 to 2" incl.; 75/95 over 2" Yield ...[PDF]

Plate - usa.arcelormittal

(4) Duracorr cold rolled sheet and plate in coil are no longer available from ArcelorMittal USA. Table 3 Specified Mechanical Properties ASTM 1010 ASTM A240 UNS S41003 Grade 40 (Optional) Grade 50 (Standard) Ultimate Tensile Strength, Min. ksi (MPa) 66 ksi 445 MPa 66 ksi 445 MPa 70 ksi 485 MPa

Grade AISI 304 Stainless Steel Properties Composition SS ...

Below is the application range of stainless steel in chloride ion medium for reference. Examples of ASTM 304 stainless steel rust environment: Sea water, sea wind, salt, perspiration, etc. SS 304 Datasheet Type 304 Stainless Steel Chemical Composition. The composition of SS304 grade stainless …

ASTM A607 Gr.50 - Structural steel for DIN,EN,AISI,JIS,BS ...

This is low alloy and high strength steel of Structural steel in the United States, we can produce plate, flat, belt, sheet, wire coil, square bar, round rod, pipe,forged valve body, forged rings, forged multidiameter shafts etc for this steel

Speedy Metals Information for ASTM A572 Grade 50 Plate

Grade 50 is used in general plate applications when the plate will be riveted, bolted, or welded. Grade 50 is a Columbium-Vanadium steel that offers a minimum yield of 50,000 PSI. In addition, ASTM A572 Grade 50 is noted for its increased resistance to atmospheric corrosion.

USA ASTM ASTM 1011 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. ASTM 1011 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Cold Rolled Steel C1010 | Metal Supermarkets - Steel ...

Grade Summary: Cold Rolled C1010 Steel is produced from rimmed, capped and semi-killed steel and are intended for exposed or unexposed parts involving bending, moderate drawing or forming and welding. This material should be painted or plated to prevent rust. Cold Rolled C1010 has a higher carbon content that C1008 resulting in slightly harder material.

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Penn Stainless Products is a supplier and processer of stainless steel plate in over 30 grades, including 304/L,316/L,309/S, 310/S, duplex, 330 and many more.[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades

ASTM SAE 1010 steel plate - Katalor Industry

ASTM - SAE A 621 CQ - SAE 1010 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's tensile strength is around 420 MPa (there is different min strength point at the different thickness.) A 621 CQ - SAE 1010 yield strength is from 170MPa to 320 MPa. (different min strength point at the different thickness.)

ASTM A1011 - SSAB

ASTM A1011. The A1011 specification is the Standard Specification for light gauge Hot-Rolled Sheet and Strip Carbon(CS and DS), Structural(SS), High-Strength Low-Alloy(HSLAS), High-Strength Low-Alloy with Improved Formability(HSLAS-F), and Ultra-High Strength(UHSS) steels in thicknesses up to 0.230"(6 mm) in coil form.[PDF]

WELDABILITY OF ASTM A 1010 STEEL

plate equal to the depth of the steel cell box closes the open longitudinal side of the last cell. Design detailed plates ... lbs for steel specimens less than 2” thick with grades 36 and 50 for a fracture-critical member at (Zone 2) 40 °F.

Forging astm 1010 - A36 steel stock Forging Low-carbon steel

Hot sell a36 carbon steel ,BBN keeps more than 10,000 tons a36 carbon steel in stock each month.We can meet our customer's any quantity request.Based on these stock source, our advantage industry spread into steel process like:cutting ( any size and any shape ) drilling,welding,milling,machining and steel structure.if you want to know more,don't miss.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.