Tel: +86-371-86151827

s460n high strength low alloy steel plate china origin

Steel grade:s460n high strength low alloy steel plate china origin

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s460n high strength low alloy steel plate china origin Introduction

China High Strength Structural Steel Sheet S460n - China ...

S460n, Steel Plate, Steel Sheet S460n manufacturer / supplier in China, offering High Strength Structural Steel Sheet S460n, China Hot Sales Hot Rolled Steel Billet Q235/Q275 Square Steel Billets for Building, China Hot Sales Hot Rolled Steel Billets 5sp/A35 Square for Building and so on.

EN 10025-3 S460N|S460N steel plate__Steel Supplier

Gangsteel is specialized in supplying EN10025-3 steel plate in S460N. For more information of S460N steel plates, please check them in following: Chemical composition % of the Product analysis of grade S460N (1.8901) Nominal thickness =< 63(mm) CEV max = …

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel.HSLA steels vary from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties.Classifications·

S460N|S460N STEEL PLATE--YUSHENG STEEL

Technical delivery conditions for Normalized steel plate S460N under the Europe standard EN10025_3,S is short for Structural . steel,460 stand for the minimum yield strength is 460MPa for S460N,N is for Normalised rolling when produce in mill.

China High Strength Structural Steel Sheet, Steel Plate ...

High Strength Steel, Structural Steel Sheet, Steel Sheet St52-3 manufacturer / supplier in China, offering High Strength Structural Steel Sheet, Steel Plate St52-3, China Hot Sales Hot Rolled Steel Billet Q235/Q275 Square Steel Billets for Building, China Hot Sales Hot Rolled Steel Billets 5sp/A35 Square for Building and so on.

China Q345b High Strength Low Alloy Structure Steel Plate ...

China Q345b High Strength Low Alloy Structure Steel Plate (Q345B), Find details about China Steel Plate, Steel Sheet from Q345b High Strength Low Alloy Structure Steel Plate (Q345B) - Laiwu Royal …

S460N,S460N STEEL,S460N PLATE - Mild steel plate ...

EN10025-3 steel plate S460N shall be rolled according to the below table of chemical composition.The limits applicable for the product analysis of structural steel plate s460n are given in the below table.

High Quality Low Alloy Structure Steel Plate - Buy High ...

High Quality Low Alloy Structure Steel Plate , Find Complete Details about High Quality Low Alloy Structure Steel Plate,High Quality Low Alloy Structure Steel Plate,Mild Steel Plates,Steel Plate Ss400 from Steel Sheets Supplier or Manufacturer-Qingdao Quanlong Metal Materials Co., Ltd.

supplier of s460n equivalent factory,A36,Q235B,Q345B steel ...

s460n equivalent mill - pond-proS460N, EN 10025-3 S460N, S460N Steel Plate, S460N steel factory Unitedsteel Carbon Plate Factory are specialized in producing and exporting Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill at Unitedsteel Group.

Structural Steel - BS EN 10025 S460N | BS EN 10025-S460N

Titon alloys Inc. specializes in S460N Steel Plate.With years of experience in manufacturing S460N Steel Plate we offer high quality, lower cost but the best service. As a result to that our export account today is in ... S355JR low alloy high strength steel plate US $500-600 / Ton ( FOB Price) High quality astm c45 carbon steel steel plate US ...

S460N|S460N STEEL PLATE--YUSHENG STEEL

Technical delivery conditions for Normalized steel plate S460N under the Europe standard EN10025_3,S is short for Structural . steel,460 stand for the minimum yield strength is 460MPa for S460N,N is for Normalised rolling when produce in mill.

supplier of s460n equivalent factory,A36,Q235B,Q345B steel ...

s460n equivalent mill - pond-proS460N, EN 10025-3 S460N, S460N Steel Plate, S460N steel factory Unitedsteel Carbon Plate Factory are specialized in producing and exporting Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill at Unitedsteel Group.

S460N,S460N STEEL,S460N PLATE - Mild steel plate ...

EN10025-3 steel plate S460N shall be rolled according to the below table of chemical composition.The limits applicable for the product analysis of structural steel plate s460n are given in the below table.

S460N Low-Alloy High-Strength Steel Plate---Henan Hzz …

1.Henan Hzz Iron&Steel Co.,Ltd can supply S460N low alloy high strength steel plate and the S460N material certificate. 2.Standard:S460N steel plate is according to EN10025-3 3.Application:S460N low alloy plates are usually used in heavily loaded parts of welded structures such as,bridges,fold gates,storages tanks,water supply tanks,etc.,for ...

S460 Structural Steel Plate, S460NL Structural Steel Plate ...

Conquest Steel and Alloys is India Based Leading Supplier and Stockist of High Quality and Speciality Steel Such as S460 Structural Steel Plate, SAILMA 460HI High-strength Structural Steel Plates Available in Ready Stock of EN 10025:3 S460 structural steel plates Exporter located in Mumbai, India.

S420N Low Alloy High Strength Steel Suppliers and ...

Find s420n low alloy high strength steel here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

China Q345b High Strength Low Alloy Structure Steel Plate ...

China Q345b High Strength Low Alloy Structure Steel Plate (Q345B), Find details about China Steel Plate, Steel Sheet from Q345b High Strength Low Alloy Structure Steel Plate (Q345B) - …

China High Strength Structural Steel Plate S460ml - China ...

China High Strength Structural Steel Plate S460ml, Find details about China S460ml, Steel Plate S460ml from High Strength Structural Steel Plate S460ml - WUGANG CHANG YU LONG INDUSTRY AND TRADE CO., LTD.

China Q345 Q390 Q420 Q460 Low Alloy High Strength Steel ...

Steel Plate, Low Alloy Steel Plate, Q345 manufacturer / supplier in China, offering Q345 Q390 Q420 Q460 Low Alloy High Strength Steel Plate, Good Quality Competitive Price 2017A Aluminium Square Pipe, Carbon Steel Elbow and so on.

Low alloy steel plate|Low alloy plate---Steel plate--Xin ...

Low alloy steel plate also named as low alloy plate which mainly used to construct drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of …

A387 Grade 12 Class 2 Alloy Steel Plate Stockists and ...

Champak steel is a exporter and Stockholders of ASME SA 387 Gr 12 Cl. 2 Plates, Chrome Moly Plate, Alloy Steel Plates, molybdenum alloy steel SA 387 GR 12 Class 2 plates, ASTM A387 Grade. 12 Cl. 2 pressure vessels Plates, EN 10028 Plates

Low Alloy High Strength Steel Plate Q345 Q460 Q550 …

Low Alloy High Strength Steel Plate Q345 Q460 Q550 Q690 Price Per Ton , Find Complete Details about Low Alloy High Strength Steel Plate Q345 Q460 Q550 Q690 Price Per Ton,Q345 Steel Plate,Prime Grade Steel Sheet,Steel Plate from Steel Sheets Supplier or Manufacturer-Shandong Fine Steel Supply Chain Co., Ltd.

China Carbon Steel 30mn Alloy Steel Plate - China Steel ...

China Carbon Steel 30mn Alloy Steel Plate, Find details about China Steel Plate, Steel Sheet from Carbon Steel 30mn Alloy Steel Plate - WUGANG CHANG YU …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.