Tel: +86-371-86151827

martensitic steel 440a b c steel plates

Steel grade:martensitic steel 440a b c steel plates

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

martensitic steel 440a b c steel plates Introduction

Martensitic steel 440A B C Steel Plates - vamosargentina.net

Martensitic steel 440A B C Steel Plates - shanksteelshipsTempering Temperature (°C) ... properties are typical for Condition A of ASTM A276# Brinell Hardness is ASTM A276 specified maximum for annealed 440A, B and C. Physical Properties of 440C Stainless Steel Plate. ... 440C stainless steel is a high carbon martensitic stainless steel.

martensitic stainless steel plate AISI 440A, 440B, 440C ...

Martensitic Stainless Steel AISI 440A, 440B, 440C . Types AISI 440A, 440B and 440C are highly hardenable chromium stainless steel with progressively increasing carbon contents. As the carbon content increases, the attainable hardness also increases, but at some sacrifice to corrosion resistance.

difference 440 a b c steels - Cold rolled steel plate price

Stainless Steel 410/420/430/431/440 A, B & C, 446 Round . Grade 440A and 440B Stainless Steels, on the other hand, have similar properties - except for a slightly lower percentage of carbon in grade 440A. Our benefactors can benefit these Stainless Steel 410/420/430/431/440 A, B & C/446 Rods from us at the most insignificant expenses.

supplier of difference 440 a b c steels,A36,Q235B,Q345B ...

Apr 29, 2015· 440 series stainless steel Discussion in 'General Knife Discussion' started by KennyB, Dec 12, 2010. Page 1 There is nothing inherently bad about 440 steels. Well I personally feel there is a huge difference between 440a, b and C. Especially comparing 440a to 440c as it possible to have nearly double the carbon content in the later.

China CNS 440A, Martensite steel, G3067, - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. G3067, 440A can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Experienced supplier of 431,444,446,440A,440B,440C ...

Bozhong Metal Group is one of the toppest 431,444,446,440A,440B,440C Stainless Steel Sheet/Plate in China.During these years of exporting , Bozhong Metal Group now has …

Stainless Steel 440A Plates (S44002) - Stainless Steel ...

Stainless Steel 440A Plates (S44002) MARTENSITIC STAINLESS STEEL . Martensitic, or hardenable stainless steels, are classified in the 400 series, usually with 11.5% chromium up to 18% chromium, with higher levels of carbon than ferritics, and are capable of being heat treated to a wide range of hardness and strength levels.

high carbon martensite stainless steel sheets, plates ...

high carbon martensite stainless steel sheets, plates, strips 440A, 440B, 440C . We are looking forward to your enquiries. YOUR CONTACT LIU sales at ahoneststeel dot com

440A, 440B, 440C, 440F, 440F Se HARDENABLE CHROMIUM ...

ALSO LOOK FOR 440 SERIES UNDER OUR CASTINGS PAGE. Description. Stainless steel 440C, also known as UNS S44004, principal elements are .95% to 1.2% carbon, 16% to 18% chromium, .75% nickel, with traces of manganese, silicon, copper, molybdenum, phosphorus and sulfur.

440a Stainless Sheet - stainless steel sheets suppliers in ...

JIS G4304 SUS 440A Stainless Steel PlateJIS G4304 SUS 440A Stainless Steel Plate Is Widely Used In Railway Vehicle JIS G4304 SUS 440A Stainless Steel Sheets, ... Type 440A is a martensitic stainless steel that may be heat treated to Rc56 and shows good toughness when heat treated.

440C Martensitic Stainless Steel Manufacturers Suppliers

The American Iron and Steel Institute classifies it as 440C martensitic standard stainless steel. Most modern knifemakers simply call it 440C. 440A: this is a hardenable stainless steel alloy, hardenable to a higher hardness than 420 series stainless steels (which are only hardenable to 52 HRC!). 440A has good corrosion resistance, and is used ...

440A Stainless Steel UNS S44002 | Ulbrich

Type 440A is a straight chromium martensitic stainless steel which combine the superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels. Learn more here about its applications and properties.

difference 440 a b c steels - Cold rolled steel plate price

Stainless Steel 410/420/430/431/440 A, B & C, 446 Round . Grade 440A and 440B Stainless Steels, on the other hand, have similar properties - except for a slightly lower percentage of carbon in grade 440A. Our benefactors can benefit these Stainless Steel 410/420/430/431/440 A, B & C/446 Rods from us at the most insignificant expenses.

China CNS 440A, Martensite steel, G3067, - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. G3067, 440A can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Stainless Steel 440A Plates (S44002) - Stainless Steel ...

Stainless Steel 440A Plates (S44002) MARTENSITIC STAINLESS STEEL . Martensitic, or hardenable stainless steels, are classified in the 400 series, usually with 11.5% chromium up to 18% chromium, with higher levels of carbon than ferritics, and are capable of being heat treated to a wide range of hardness and strength levels.

supplier of ship building martensitic steel,A36,Q235B ...

Martensitic steel 440A B C Steel Plates. 440C Martensitic Stainless Steel Manufacturers Suppliers The American Iron and Steel Institute classifies it as 440C martensitic standard stainless steel. Most modern knifemakers simply call it 440C. 440A: this is a hardenable stainless steel alloy, hardenable to a higher hardness than 420 series ...

440A Stainless Steel UNS S44002 | Ulbrich

Type 440A is a straight chromium martensitic stainless steel which combine the superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels. Learn more here about its applications and properties.

Martensitic Martensite Stainless Steel - 403 410 410S 416 ...

Martensitic stainless steel has a relatively high carbon content (0.1% - 1.2%) compared to other stainless steel. The martensitic steel are plain chromium steel containing between 12% and 18% chromium, can be heat treated to obtain high strength with good ductility. Martensitic stainless steel has very high hardenability.

440C Stainless Steel Products and Specifications - Penn ...

Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys.

Stainless Steel PH Sheet - Stainless Steel 440A ...

However, grade 440C is more readily available than the other standard grades. Grade 440F, a free-machining type of grade 440 series, is also available with a high carbon content similar to that of grade 440C. Martensitic steel grades are high-hardness steels, usually fabricated using techniques that require hardening and tempering treatments.

Stainless Steel 440c Alloys ( Martensitic ) Sheets,Plates ...

Stainless Steel 440c Alloys ( Martensitic ) Sheets,Plates , Find Complete Details about Stainless Steel 440c Alloys ( Martensitic ) Sheets,Plates,440c Steel Sheets,440c Steel Plates,Stainless Steel Plates 440c from Stainless Steel Sheets Supplier or Manufacturer-Ahonest Changjiang Stainless Steel …

Stainless Steel - Grade 440 (UNS S44000)

Grade 440C stainless steels are high carbon steels, which attain the highest hardness, wear resistance and strength of all stainless steel grades after heat treatment. These properties make this grade suitable for applications such as valve components and ball bearings. Grade 440A and 440B stainless ...

SAE steel grades - Wikipedia

The SAE steel grades system is a standard alloy numbering systems for steel grades maintained by SAE International. In the 1930s and 1940s the American Iron and Steel Institute (AISI) and SAE were both involved in efforts to standardize such a numbering system for steels. These efforts were similar and overlapped significantly.Carbon steel·

Stainless Steel Supplier & Manufacturer in China--CIVMATS

Since 1989, Civmats has been producing stainless steel materials. Today, Civmats possesses the most complete production lines, ranging from stainless steel pipes and pipefittings, stainless steel bars, stainless steel sheets and plates, stainless steel coils and strips, to stainless steel wires.

440C - Rolled Alloys, Inc.

Plate Beveling. Alloys. ... 440C . Stainless 440C is a high-carbon martensitic stainless steel. As a martensitic stainless steel, 440C is magnetic and can be hardened by heat treatment. The high carbon content in 440C provides high hardness and strength. Despite this carbon content, the chromium content is sufficient to retain its stainless ...[PDF]

Stainless Steel - Grade 440 (UNS S44000) - 4.imimg

Stainless Steel - Grade 440 (UNS S44000) Introduction What is 440C? ... Martensitic steel grades are high-hardness steels, usually fabricated using techniques that require hardening and ... A276 specified maximum for annealed 440A, B and C. Mechanical Property Requirements For Material in the Annealed Condition to 1) AS2837 - 1986

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.