Tel: +86-371-86151827

no 4 satin finish 4x8 stainless steel sheet 301 302 304

Steel grade:no 4 satin finish 4x8 stainless steel sheet 301 302 304

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

no 4 satin finish 4x8 stainless steel sheet 301 302 304 Introduction

304 Stainless Steel Sheet #4 Brushed Finish | Stainless Supply

304 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 304 stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation.

2B vs. No. 4 Stainless Steel Finish | All Metals Fabrication

The 2B mill finish is achieved with an additional light cold roll pass, and is the standard finish for 201, 301, 304, 304L, and 316L stainless steel. Stainless steel with a 2B finish is generally used for bakeware and flatware, plumbing fixtures, solar panels, industrial equipment, and wheel covers.

No 4 satin finish 309S stainless steel sheet

304 Stainless Steel Sheet No.4 Satin Finish - alibabaPackaging Details 304 stainless steel sheet no.4 satin finish Standard export seaworthy package,or as required. *Wooden Box. *Wooden Pallet. *Woven Bag with Bundle in 3 Points. Port Tianjin Xingang Port, China; or as required.

NO 4 Stainless Steel Sheet 904L 304 - w3s.in

304 No. 4 Steel Sheet, 304 No. 4 Stainless Steel Plate, Stainless Steel Sheet 304 No. 4 manufacturer / supplier in China, offering 304 No. 4 Stainless Steel Sheet, Cold Rolled 2b Finish 4X8 SUS304 Stainless Steel Sheet Plate, Tisco 2b/Hl/No. 4/Ba Finish AISI SUS430 Inox Stainless Steel Sheet and so on. Learn more

No. 4 Polished Finish | Penn Stainless Products

No. 4 Polished Finish. No. 4 Finish is produced with short, parallel polishing lines. These lines extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives. Depending on requirements, the final finish can be between 120 to 320 grit.

304 Sheet / Plate, #4 Finish - Online Metal Store

304 Sheet / Plate, #4 Finish. The #4 finish is the brushed finish you see in most restaurants and professional kitchens. Stainless Steel Sheet T-304/304L is an excellent choice for its tensile strength, high resistance to rust, and high fabrication ability.

Brush Finish Ss 301 304 4x8 Stainless Steel Sheet - Buy ...

Brush Finish Ss 301 304 4x8 Stainless Steel Sheet , Find Complete Details about Brush Finish Ss 301 304 4x8 Stainless Steel Sheet,4x8 Stainless Steel Sheet,Brush Finish Ss Sheet,301 304 Stainless Steel Sheet from Stainless Steel Sheets Supplier or Manufacturer-Wuxi Xiangxin Steel Import And Export Limited CompanyUser rating: 5/5

Types of Finishes - Mirror - Grain - Williams Metalfinishing

Williams Metalfinishing Types of Finishes. The information provided below is somewhat subjective and is used as our general guide at Williams Metalfinishing. #3 Finish - Grain finish. Also called Grinding, Roughing or Rough Grinding Very coarse finish. The material is polished to a uniform finish …

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

SSINA: Stainless Steel: Finishes

It is produced by Tampico brushing a No. 4 finish sheet in an oil and abrasive medium. This finish is sometimes seen on stainless steel architectural applications that were installed between about 1930 until the 1980’s, including the exterior columnar panels …

Stainless Steel sheet Products - Polished Sheet | Penn ...

Stainless Steel Polished Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet in a variety of finishes, including 2D, 2B, #4 Brush, and #8 Mirror finish. We also can supply specialty finishes per your exact requirements.

ASTM A240 304-2B Stainless Steel Sheet | Buy Online | Cut ...

Buy Metal Online – ASTM A240 304-2B Stainless Steel Sheet – Order Large or Small Quantity Online – Cut to Size Stainless Sheet – No Minimum Order. ... **Please note, 304 # 4 brushed stainless and 304 # 8 mirrored finish have a protective plastic layer on one side. This can be easily peeled off to reveal clean, untouched material. ...

Types of Finishes - Mirror - Grain - Williams Metalfinishing

Williams Metalfinishing Types of Finishes. The information provided below is somewhat subjective and is used as our general guide at Williams Metalfinishing. #3 Finish - Grain finish. Also called Grinding, Roughing or Rough Grinding Very coarse finish. The material is polished to a uniform finish between 60 and 80 grit.

NO 4 Stainless Steel Sheet 904L 304 - w3s.in

China Ss Stainless Steel Sheet 904L No. 4 Brushed Finish ... ss Stainless Steel Sheet 904L No. 4 Brushed Finish 904L Stainless steel is a production which not easy rust, acid resistance and corrosion resistance, so it is widely used in light industry, heavy industry, daily necessities and the …

304 SHEET 2B FINISH - 1/4" Thick, 304 Sheet - Mill Finish ...

Order 304 SHEET 2B FINISH - 1/4" Thick, 304 Sheet - Mill Finish #2 , and Stainless Steel in small quantities and no minimums at The Metal Store.

Guide to Stainless Steel Sheet Finishes | Mill, Polished ...

Stainless Steel Sheet Finishes. Stainless steel sheet is produced in many types of finishes due to the various uses and applications that stainless steel can be used in. It has become popular in kitchens due to its low maintenance, cleanliness, appearance, and corrosion resistance to food acids and water.

Stainless Steel Sheet, Plate Coil Supplier-Jiangsu Steel Group

Buy Stainless Steel Sheet, Plate Coil at jingsu steel group-Stainless steel strip,stainless steel sheet,stainless steel hot rolled plate,stainless steel cold rolled coil in Stock,High quality at factory price.

301, 302, and 304 Stainless Steel Metal Properties

Here are the physical and chemical properties of the 301, 302, and 304 stainless steel that we regularly stock - including the free bend requirements for each alloy.

Stainless Steel Surface Finishes - askzn.co.za

The Standard Mill Surface Finished are laid down in Specifications (BS 1449, Part 4, and the Committee of Stainless Steel Producers, American Iron & Steel Institute). The finished are designated by a system of numbers, and these are broadly described hereunder relative to the finishing operations employed.

304 Stainless Steel Sheet #8 Mirror | Stainless Supply

304 stainless steel sheet #8 mirror has a non-directional finish that virtually looks like a mirror. 304 stainless steel sheet #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. 304 stainless steel sheet #8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

ASTM A240 304 Stainless Steel Plate | Buy Online | Cut to ...

ASTM A240 304 Stainless Steel Plate Help Print View Larger. Select Your Size: ... ASTM A240 (Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.) Alloy: 304. Characteristics: Semi-smooth, dull grey finish. Sharp or defined edges. Accurate dimensions ...

Stainless Steel Sheets for Sale - 304, Cold Rolled 2B & #4 ...

Thickness and finishes. 304 Stainless Steel sheets and plates are available in several finishes, but the most common are 2B (milled) finish, #4 finish (brushed) and Chrome #8 (mirror finish) is also readily available. 2B is a milled finish that is dull grey and semi-smooth to the touch. Like other forms of stainless steel it has excellent ...

Stainless Steel sheet Products - Polished Sheet | Penn ...

Stainless Steel Polished Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet in a variety of finishes, including 2D, 2B, #4 Brush, and #8 Mirror finish. We also can supply specialty finishes per your exact requirements.

NO.4 finish Stainless Steel sheet 201 304 - srilankasports.org

Hairline+NO.4 stainless steel sheet . Stainless Steel Sheet, Metal Screen, Room Divider manufacturer / supplier in China, offering China Stainless Steel Sheet Grade AISI 430 304 Satin or No. 4 Finish with Laser Cut PVC Film, Decorative Laser Cut Metal Screen for Background Screen Wall Panel, High Quality 201 304 316 Stainless Steel Sheet Rose Gold Decorative Sheet and so on.

18 Gauge (.048") Thick 304 Stainless Steel Sheet from ...

Home > Stainless Steel Sheet Metal > 304 Stainless Steel Sheet > 18 Gauge Brushed Satin Finish 304 STAINLESS STEEL SHEET METAL ... 18 Gauge 304 Brushed Stainless Steel Sheet Peel Off PVC Protective Film One Side .048" Thick - Standard 24" Width x 36" Length Standard Cut - S-SS-304-048-24-36.048" (18 Gauge) 304 Brushed Stainless Steel 24" x 48" ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.