Tel: +86-371-86151827

eh 36 steel plate heat characteristic

Steel grade:eh 36 steel plate heat characteristic

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

eh 36 steel plate heat characteristic Introduction

supplier of eh 36 steel plate heat characteristic,A36 ...

A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material. ... eh 36 steel plate heat characteristic.

AH 36 - DH 36 - EH 36 / 40-High Strength Structural Steel ...

aasteel› …› Offshore Construction (ABS Certified)A The contents of any other element intentionally added is to be determined and reported. B The steel is to contain at least one of the grain refining elements in sufficient amount to meet the fine grain practice requirement. C Grade AH 0.5 in. [12.5 mm] and under in thickness may have a minimum manganese content of 0.70%. D If the content of soluble aluminum is not less than 0.015%, the ...

DH36 Shipbuilding steel plate - BEBON INTERNATIONAL

DH36 Shipbuilding steel plate. DH36 shipbuilding steel plate is used for shipbuiling&platform.The shipbuilding steel plate grade DH36 is the high tensile strength steel.DH36 shipbuilding steel is the Hull structural steel,with it's good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.ASTM A131 DH36 steel plate can be used in ...

ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36 Marine ...

Marine & OffShore Steel Plate. ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36. A structural grade of steel plate utilized almost exclusively in the shipbuilding and offshore industries. This grade is defined as Higher Strength with specified minimum yield of 51 KSI. ... BBN Steel Products. Structural, Carbon & HSLA Steel Plate .[PDF]

Steel Plate & Sheet - Alro Steel

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

steel equivientdifferences between dh 36 steel and ah36 ...

China Iron and steel supplier/factory,steel grade/materia . BBN is the China Iron and steel supplier/factory,offer what is the difference between ah32 and ah36 steel plate stock,BBN keep A36,A283,S355J2,SS400,Q345B,16Mo3 steel stock in China,best price and high quality of SG295,AH36 ship steel,ABS/LR grade A shipbuilding steel.

EH36 NVE36 E36 EH36 Steel plate,EH36 NVE36 E36 EH36 …

eh36 nve36 e36 eh36 EN10025 E360 steel plate/sheet ,EN10025 E360 steel plate/sheet, under EN standard, we can regard E360 steel plate/sheet for general Construction steels .EN10025 E360 steel plate/sheet is for general Construction steels.The

AH36 Shipbuilding steel plate - BEBON INTERNATIONAL

AH36 Shipbuilding steel plate. ASTM A131 AH36 steel plate, AH36 steel is a kind of steel for shipbuilding and platform. Shipbuilding steel plate AH36 is the high tensile strength steel. As a professional AH36 shipbuilding steel plate exporter, Bebon international can supply steel plate AH36.

supplier of welding procedures for eh 36 steel,A36,Q235B ...

high tensil steel ms plate eh 36,ASTM A572-50,Q345 steel . AH 36 - DH 36 - EH 36 / 40-High Strength Structural Steel The high strength characteristics service the structural requirements of ships, barges, and other types of marine equipment. The EH 40 is utilized for applications which require added strength. ABS certification is normally provided.

EH36 NVE36 E36 EH36 Steel plate,EH36 NVE36 E36 EH36 Steel ...

eh36 nve36 e36 eh36 EN10025 E360 steel plate/sheet ,EN10025 E360 steel plate/sheet, under EN standard, we can regard E360 steel plate/sheet for general Construction steels .EN10025 E360 steel plate/sheet is for general Construction steels.The

EH36 equvalent - MS Plates - napmr.org

s355j2+n/s355k2+n/eh36 fine grain high . s355j2+n/s355k2+n/eh36 fine grain high tensile steel plate nearest equivalent en 10025 s355j2+n, en 10025 s355k2+n, astm a 572 grade 50, bs 4360 grade 50 d, 50 dd, jis 3106 sm 490, jis 3101 ss490, abs eh 36, lrs eh 36, gl e36 application.[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;[PDF]

Datasheet for Steel Grades Carbon Steel ASTM A36

information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of ASTM A36,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application. Datasheet for Steel Grades Carbon Steel ASTM A36 ASTM A36 Standard Number:

A-36-American Alloy Steel

aasteel› …› Construction / Bridge Building (HSLA)A-36. Home > Products/Industries > Construction / Bridge Building (HSLA) > A-36; Chemical Requirements. Note 1 - Where "-" appears in this table, there is no requirement. The heat analysis for manganese shall be determined and reported as described in the heat …[PDF]

Steel Plate & Sheet - Alro Steel

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

eh36tm steel - Mild Cold Rolled steel plate

GL EH36TM Steel plate,GL EH36TM ship plate,GL EH36TM . GL EH36TM is the Hull structural steel,with it's good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.GL EH36TM steel can be used in the manufacture of the ocean ship's hull structure whose weight is above 10000 tons.[PDF]

High-Strength Low-Alloy Steels - ASM International

High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are ... The HSLA steels in sheet or plate form have low carbon content (0.05 to ... as an HSLA steel may have characteristics from more than one grouping. For example, all

Steel material properties - Steelconstruction.info

Steel derives its mechanical properties from a combination of chemical composition, heat treatment and manufacturing processes. While the major constituent of steel is iron, the addition of very small quantities of other elements can have a marked effect upon the properties of the steel.[PDF]

Heat-Treated Steel Plate - Algoma

Heat-Treated Steel Plate 3 Shearing and Punching Both Algoma 100 and 130 grades, up to 0.5" (12.7mm), can be either sheared or punched using equipment of sufficient capacity. The punch diameter should be at least 1.25 times the plate thickness. Tools must be kept in good working order and operator safety measures must be followed.[PDF]

STEEL PLATES FOR SHIPBUIRDING - JFEスチール株式会社

STEEL PLATES FOR SHIPBUILDING 1202N 1-0.5 JTR Printed in Japan Notice ... Plate Excellent HAZ toughness under high heat input welding. EWEL is composed of three independent technologies based on Super-OLAC. One of them produces finer ... 36 of CCS Class is only for E grade.

ASTM Welding Procedures A36 to A930 - weldreality

A36 to A389 ASTM Welding Procedures. MIG Welding Information Techniques & Tips : Weldreality Home Page. ... Preheat ah/eh/dh 32-36 >13mm 50F >25mm 100F: K02300. Carb 0.16/0.26 Mn0.7/1.5 Si0.1/0.5 AH/DH/EH Ni0.4 ... When welding, the weld shrinkage stresses impose tensile strains in the steel plate or on inclusions paralleled to the plate ...[PDF]

Steel Plates for Offshore Structures

We have been supplied our offshore–use steel plates all of the world. We provide you rich selection of preproduction qualification steel plates. With nominal yield strengths in the range 345 to 690MPa . We have the record of high quality. Any serious quality claim has not been reported with our offshore–use steel plates.[PDF]

Heat Treated Steel Plate - C.W. Carry

cut Algoma heat-treated plate, since all heat-treated plate products are sensitive to heat. A small tip will minimize the heat effect and ensure minimal degradation of the steel’s inherent properties. Algoma’s virtually scale-free surface will improve the smoothness of …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.