Tel: +86-371-86151827

6x8 d coil astm a653 z120

Steel grade:6x8 d coil astm a653 z120

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

6x8 d coil astm a653 z120 Introduction

ASTM A653 / A653M - 18 Standard Specification for Steel ...

A653 / A653M-18 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process ... (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. 1.2 The product is produced in various zinc or zinc-iron alloy ... ASTM A653 / A653M-18 ...[PDF]

Designation:A 653/A 653M–08 Designation: A 653/A …

Designation:A 653/A 653M–08 Designation: A 653/A 653M – 09 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process1 This standard is issued under the fixed designationA653/A653M; the number immediately following the designation indicates the year

ASTM A653 Hot Dip Galvanized Coils & Sheets - quality norms

Hot Dip Galvanized Coils & Sheets - ASTM A653 - Info provided by steel mills of the world

ASTM A653 Hot Dipped Galvanized Steel On MST Steel Corp.

Browse ASTM A653 Hot Dipped Galvanized Steel in the MST Steel Corp. catalog including Item #,Steel Type,Minimum Yield Strength Supplies Steel Coils & Sheets-Michigan-Kentucky-MST Steel MST Steel Corp. is a Supplier and Processor of Steel Coils and Steel Sheets.

ASTM A653 - PDF Free Download - edoc.site

Designation: A 653/A 653M – 00 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron AlloyCoated (Galvannealed) by the Hot-Dip Process1 This standard is issued under the fixed designation A 653/A 653M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

ASTM A653 Galvanized Steel - TubingChina

ASTM A653 Galvanized Steel. ASTM A653 Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process covers steel sheet, zinc-coated or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths.The material is available in several designations as follows: commercial steel, forming steel, deep drawing steel ...

ASTM A653 | BuildSite

ASTM Standards ASTM A653. ASTM A653 / A653M - 13 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process[PDF]

Hot-Dip Zinc-Coated Steel Coils

CSVC can provide P/O coil, Cold Rolled coil, ASCR coil, Galvanized (GI & GA) coil, and Electrical Steel product coil with high quality. The total annual production capacity is 1.2 million ... ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by …

Galvanized Steel Coil Z120, Galvanized Steel Coil Z120 ...

Alibaba offers 888 galvanized steel coil z120 products. About 87% of these are steel sheets, 10% are steel strips. A wide variety of galvanized steel coil z120 options are available to you, such as astm…[PDF]

GalvInfoNote Understanding Coating Weight …

Understanding Coating Weight Designations for Zinc-Based Coatings on Steel Sheet Rev 2.2 Jan-04 Introduction One of the most confusingtopics related to coated -steel sheet products is the issue of coating weight designations andwhat they mean with respectto product performance. This discussion is intended to help clarify this issue.

Dx51d Z120 Galvanized Steel Coil, Dx51d Z120 Galvanized ...

Alibaba offers 729 dx51d z120 galvanized steel coil products. About 89% of these are steel sheets, 1% are stainless steel sheets. A wide variety of dx51d z120 galvanized steel coil options are available to you, such as aisi, en, and astm.

4.Steel Coils, 4.Steel Coils direct from Sanli Industry Co ...

140g Hot Rolled Astm a653 Hot-Dip Galvanized Steel Coil. $550.00 - $900.00 / Metric Ton. 10 Metric Tons (Min. Order) 12 Gauge Astm a653 Hot Dipped Galvanized Steel Coil. ... 0.45x1250mm 6x8 Galvanized Steel Coil. $550.00 - $900.00 / Metric Ton. 10 Metric Tons (Min. Order) 0.36x1220mm 60g 80g Prepainted Galvanized Steel Coil.

dx51d z120 csb painted steel coil - w3s.in

Buy Cheap Dx51d Z120 Galvanized Steel Coil from Global ...Alibaba offers 793 dx51d z120 galvanized steel coil products. About 88% of these are steel sheets, 1% are stainless steel sheets. A wide variety of dx51d z120 galvanized steel coil options are available to you, such as aisi, astm, and gb. ... dx51d z120 csb painted galvanized steel coil.

galvanized and coated sheet /coil - Astm A653 Csb,cq,z120 ...

China galvanized and coated sheet /coil - Astm A653 SGCC,DX51D GI coils-#8047 is supplied by ★ galvanized and coated sheet /coil - Astm A653 manufacturers, producers, suppliers on Global Sources ... galvanized and coated sheet /coil - Astm A653 Csb,cq,z120,regular Spangle,non-skinpassed,bright F ... Liaocheng Huajian Steel Co. Ltd does not ...

dry unoiled galvanizing steel coil - pond-pro

JIS G3302 ASTM A653 Z120 Chromated Dry Unoiled …Looking for the JIS G3302 ASTM A653 Z120 chromated dry unoiled regular spangle hot dipped galvanized galvanizing zinc coating steel coils HDG GI? Welcome to contact JUBAI STEEL which is one of the leading China manufacturers and suppliers in this field. Our ...

ASTM A653 G30 G60 G90 Zinc Coating Galvanized Steel Coil

Galvanized Coil, Galvanized Steel Coil, Gi manufacturer / supplier in China, offering ASTM A653 G30 G60 G90 Zinc Coating Galvanized Steel Coil, Galvanized Steel Metal Iron Plate Steel Sheet HS Code, Color Coated Galvanized Roofing Sheets Price Philippines and so on.

DX51D Z100 Steel Coil Prepainted Steel Coil

Ppgi Prepainted Steel Coil Dx51d Z100, Ppgi Prepainted ...About 83% of these are steel sheets, 1% are stainless steel sheets. A wide variety of ppgi prepainted steel coil dx51d z100 options are available to you, such as aisi, en, and astm. You can also choose from free samples. There are 704 ppgi prepainted steel coil dx51d z100 suppliers, mainly located in Asia.

DX51D + AZ DX51D + Z Z120 Galvanized Steel Coil / ASTM ...

Popular Products of DX51D + AZ DX51D + Z Z120 Galvanized Steel Coil / ASTM A653 508mm 610mm ID For Roofing by Galvanized Steel Coil - Shixin Steel Co.,Ltd from China.

China 20-1250 mm Width ASTM A653 Galvanized Steel Coil ...

Galvanized Steel Coil, A653 Steel Coil, Dx51d Galvanized Steel Coil manufacturer / supplier in China, offering 20-1250 mm Width ASTM A653 Galvanized Steel Coil, Color Coated Prepainted Galvanized Corrugated Steel Roofing Zinc Sheet, PPGI Colorful Prepainted Color Coated Galvanized Corrugated Steel Roofing Sheet and so on.

Made in China DX51D Z100 steel coil

Dx51d Z100 Galvanized Steel Coil ... - made-in-chinaIf you are about to import Dx51d Z100 Galvanized Steel Coil, you can compare the Dx51d Z100 Galvanized Steel Coil factories and manufacturers with reasonable price listed above. More related options such as steel coil, galvanized steel coil, galvanized steel sheet could be your choices too.

China A653 Z120 Regular Spangle Galvanized Steel Coil ...

Steel Coil, Gi Steel Coil, Zinc Coated Coil manufacturer / supplier in China, offering A653 Z120 Regular Spangle Galvanized Steel Coil, G550 Z275 Regular Spangle Gi Galvanized Steel Coil, DC51D Z100 Cold Rolled Galvanized Steel Coil and so on.

China Jisg3302 Dx51d Z120 Coating Galvanized Steel Coil Gi ...

Galvanized Coil, Galvanized Steel Coil, Steel Coil manufacturer / supplier in China, offering Jisg3302 Dx51d Z120 Coating Galvanized Steel Coil Gi Coil, Best Sale Matt Color Coated/Prepainted Galvanized Steel Coil, SGCC Z100 Colorful PPGI Pre-Paint Galvanized Steel Coil and so on.

ASTM-A653 | Standard Specification for Steel Sheet, Zinc ...

ASTM-A653 › Historical ... (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. The material is available in several designations as follows: commercial steel, forming steel, deep drawing steel, extra deep drawing steel, structural steel, high strength low alloy steel, high strength low alloy ...[PDF]

Saudi Standards, Metrology and Quality Org. (SASO)

manufacturer’s name or brand, SASO ASTM specification, coating designation,grade, size, unit weight, purchaser’s order number, and unit identification (that is, ticket number, coil number, etc.) legibly shown on a tag attached to each coil or shipping unit. All information …

z100 dx51d steel sheet in coil price

Dx51d Z100 Galvanized Steel Coil Wholesale, Steel Coil ...About 84% of these are steel sheets, 4% are stainless steel sheets. A wide variety of dx51d z100 galvanized steel coil options are available to you, such as aisi, astm. You can also choose from cold rolled, hot rolled. As well as from free samples. There are 5,299 dx51d z100 galvanized steel coil suppliers, mainly located in Asia.

suppliers astm a653 pre galvanized steel coil

Astm A653 Prepainted Galvanized Steel Coil, Astm A653 . About 97% of these are steel sheets, 1% are stainless steel sheets A wide variety of astm a653 prepainted galvanized steel coil options are available to you, such as aisi, en, and astm You can also choose from free samples, paid samples There are 3,540 astm a653 prepainted galvanized steel coil suppliers, mainly located in Asia

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.