Tel: +86-371-86151827

high strength martensitic stainless steel plate 403

Steel grade:high strength martensitic stainless steel plate 403

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

high strength martensitic stainless steel plate 403 Introduction

Stainless Steel – Grade 403 (UNS S40300)

The combination of martensitic and ferritic steels forms a fourth group of stainless steels known as precipitation-hardened steels. The following datasheet provides an overview of grade 403 stainless steel. Chemical Composition. The chemical composition of grade 403 stainless steel …

Stainless Steel 403 plates (S40300) - Stainless Steel 403 ...

Stainless Steel 403 plates (S40300) MARTENSITIC STAINLESS STEEL . Martensitic, or hardenable stainless steels, are classified in the 400 series, usually with 11.5% chromium up to 18% chromium, with higher levels of carbon than ferritics, and are capable of being heat treated to a wide range of hardness and strength levels.

Martensitic Martensite Stainless Steel - 403 410 410S 416 ...

Martensitic stainless steel has a relatively high carbon content (0.1% - 1.2%) compared to other stainless steel. The martensitic steel are plain chromium steel containing between 12% and 18% chromium, can be heat treated to obtain high strength with good ductility. Martensitic stainless steel has very high hardenability.

403 Stainless Steel products in Stock - Penn Stainless ...

403 Stainless Steel. Penn Stainless inventory includes Alloy 403 (UNS S40300) in round bar thru re-certification of 410 stainless steel. Other product forms such as plate may also be available by re-certifying 410 stainless steel to meet the requirements of 403.[PDF]

ATI 403™ - atimetals

ATI 403™ alloy is a corrosion and heat resistant 12% Cr martensitic stainless steel. This alloy offers a wide range of ... which demand a m aterial that combines corrosion resistance with a high elastic limit and high impact strength. The fol lowing table shows a comparison of the nominal composition of ATI 403™ alloy with that of ATI ...

Martensitic Stainless Steels | Stainless Steel Types

Martensitic Stainless Steel Grades. Martensitic stainless steels are characterized by high strength and hardness in the heat treated condition. We offer a range of martensitic stainless alloys which contain 11 – 17% chromium with 0.15 – 0.63% carbon.

Stainless steel - Wikipedia

In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable (inoxidizable), is a steel alloy, with highest percentage contents of iron, chromium, and nickel, with a minimum of 10.5% chromium content by mass and a maximum of 1.2% carbon by mass.. Stainless steels are most notable for their corrosion resistance, which increases with increasing chromium content.Corrosion resistance·

high strength 403 - w3s.in

With better strength at higher temperatures, Type 422 (S42200) is an appealing alternative to Type 403. Type 422 is a hardenable martensitic stainless steel which is being widely used for high … 403 Stainless Steel Coil Wholesale, Stainless Steel ... And whether 403 stainless steel coil is cold rolled, or hot rolled. Learn more

Martensitic Stainless Steel - West Yorkshire Steel

Martensitic grades of stainless steel are supplied in a comprehensive range of sizes and specifications conforming to British, European, American and International standards. Martensitic stainless steel specifications combine high strength with corrosion resistance, though they are less ductile than other stainless steels types. Grades can ...

Type 431 Stainless Steel | 431 Stainless | Smiths Metal ...

Type 431 Stainless Steel Hardenable Martensitic Stainless Steel Alloy. Type 431 is a hardenable martensitic stainless steel alloy which has a combination of high tensile and torsional strength - this makes it well suited to shaft manufacture. The alloy is intended for use in applications requiring good strength and toughness combined with ...

403 Stainless Steel Plate - w3s.in

Alloy 410 Martensitic Stainless Steel Plate - Sandmeyer Steel. Alloy 410 stainless steel plate is the general purpose 12% chromium martensitic stainless steel that can be heat treated to obtain a wide range of mechanical properties. 410 stainless steel plate possesses high strength and hardness coupled with good corrosion resistance. Learn more

403 Stainless Steel Specification from ANSON Steel Supplier

This straight chromium stainless steel offers reasonable corrosion resistance and high mechanical characteristics. The 403 series offers heat resistance and a scaling temperature of about 1300°F. It is a corrosion and heat resistant 12% Cr martensitic stainless steel.

Martensitic Stainless Steel - West Yorkshire Steel

Martensitic grades of stainless steel are supplied in a comprehensive range of sizes and specifications conforming to British, European, American and International standards. Martensitic stainless steel specifications combine high strength with corrosion resistance, though they are less ductile than other stainless steels types. Grades can ...

Ferritic martensitic | Industeel

Ferritic stainless steels. These grades are characterized by a very low content of nickel (less than 1%). Their low carbon content prevents hardening by heat treatment and induce a better corrosion resistance than martensitic stainless steels. Martensitic stainless steels. These grades present similar chemical composition than ferritic grades.

STAINLESS | Castle Metals Site

Stainless Steel 15Cr-5Ni is a Martensitic stainless steel with high strength, corrosion resistance and hardness obtained by low temperature heat treatment. 15Cr-5Ni is typically used in applications needing high corrosion resistance and transverse properties relative to other martensitic steels.

Type 431 Stainless Steel | 431 Stainless | Smiths Metal ...

Type 431 Stainless Steel Hardenable Martensitic Stainless Steel Alloy. Type 431 is a hardenable martensitic stainless steel alloy which has a combination of high tensile and torsional strength - this makes it well suited to shaft manufacture. The alloy is intended for use in applications requiring good strength and toughness combined with ...

Welding Stainless Steel | Clinton Aluminum

Stainless steel is renowned for its many beneficial attributes that have profoundly affected a wide variety of industries. Since its development more than a hundred years ago, stainless steel has been prized for its high strength and corrosion resistance at an affordable price point. These benefits include many welding applications as well.

Martensitic Stainless Steel - an overview | ScienceDirect ...

Martensitic stainless steel (0.40 C, 0.28 Si, 0.34 Mn, 13.7 Cr, 1.20 Mo), supplied as quenched and tempered plates, was used as the experimental material. The monotonic tensile strength of the material is about 1700 MPa.

403 Stainless Steel Sheet Suppliers | ASTM A240 Type 403 ...

AISI 403 stainless steel sheets are iron alloys and have 84% of their average alloy composition in common. Stainless steel 403 sheet is a martensitic stainless steel formulated for primary forming into wrought products. 403 is the AISI designation for this material. S40300 is the UNS number.

SAE steel grades - Wikipedia

The SAE steel grades system is a standard alloy numbering systems for steel grades maintained by SAE International. In the 1930s and 1940s the American Iron and Steel Institute (AISI) and SAE were both involved in efforts to standardize such a numbering system for steels. These efforts were similar and overlapped significantly.Carbon steel·

AISI 403 (S40300) Stainless Steel :: MakeItFrom

AISI 403 stainless steel is a martensitic stainless steel formulated for primary forming into wrought products. 403 is the AISI designation for this material. S40300 is the UNS number. Additionally, the British Standard (BS) designation is 403S17.

Selection of High Strength Stainless Steels for Aerospace ...

Figure 2 - Relative range of fracture toughness and specific strength for high strength alloy steels and PH stainless steels. The military and aerospace, among other sectors, would like to capitalize on the light weight advantages of metals like aluminum and titanium, to the extent permitted by strength …

316 Stainless Steel- Strip, Foil, Coil, Rod, Bar & Plate ...

Primary 400 Series SS Types: 403, 405, 409, 410, 416, 418, 440C, 430, and 455. PH Grades Precipitation hardening stainless steel can be hardened by heat treatment, thereby combining high strength and hardness with corrosion resistance that is greater than that of the martensitic chromium stainless steels.

Stainless steel - Wikipedia

In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable (inoxidizable), is a steel alloy, with highest percentage contents of iron, chromium, and nickel, with a minimum of 10.5% chromium content by mass and a maximum of 1.2% carbon by mass.. Stainless steels are most notable for their corrosion resistance, which increases with increasing chromium content.Corrosion resistance·

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.