Tel: +86-371-86151827

a516 gr 70 hot rolled carbon steel plate

Steel grade:a516 gr 70 hot rolled carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a516 gr 70 hot rolled carbon steel plate Introduction

ASTM A516 Grade 70 Carbon Steel Plates ... - ganpatind

ASTM A516 Grade 70 Steel Plates, ASTM A516 Grade 70 Sheets, ASTM A516 Gr 70 Carbon Steel Plates, ASTM A516 Gr 70 Sheet, ASTM A516 Grade 70 Carbon Steel Sheets, ASTM A516 Gr 70 Hot Rolled Plates Supplier in Mumbai, India.

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important. Plates 1.50” and under in thickness are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. Plates over 1.50” in thickness shall be normalized.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

ASTM A516 Gr70 Carbon Steel Plate Hot Rolled 12mm x …

China Carbon Steel Plate Manufacturer Landee Provides Carbon Steel Plate, ASTM A516 Gr70, Hot Rolled, 12mm x 1500mm x 3500mm, Pressure Vessel Plate. ASTM A516 Gr70 Carbon Steel Plate Hot Rolled 12mm x 1500mm x 3500mm ... SA 516 GR.70 Carbon Steel Plate 3000 X 12000 X 10mm Hot Rolled.

SA516 Gr 70 Carbon Steel Boiler Plate Suppliers and ...

Champak steel is a exporters and Stockholders of ASME SA 516 Gr 70 Plates, SA516 Gr.70 Carbon Steel Plate, ASTM A516 Grade 70 pressure vessels Plates, A516 Gr.70 Boiler Steel Plate, A516 Grade 70 Welded Steel Plates

ASTM A516 Gr 70 NACE Plate, ASME SA516 GR.70 HIC Plate ...

RPF Pipes & Fittings - leading Suppliers of ASTM A516 Grade 70 NACE + HIC Carbon Steel Plate, ASME SA516 Gr 70 NACE HIC Steel Plates, A516 Gr 70 NACE Tested Pressure Vessel Plates, ASME SA516 Gr.70 HIC Tested Boiler Plate in Gujarat, India.

ASTM A516 GR 60/70 Steel Plate-GNEE GROUP Discount …

Product Introduction

ASTM A516 Grade 70 Carbon Steel Plates

ASTM A516 GR.70 Carbon Steel Boiler Quality Plates Manufacturer in India, GR.70 ASTM A516 CS Plates, CS SA516 Grade-70 Plate Stockist, ASTM A516 Grade 70 Pressure Vessel Steel Plates Distributors, GR.70 Carbon Steel ASME SA516 Plate Exporter, ASTM A516 Grade 70 Carbon Steel HR Plate Dealer,SA516 Grade-70 CS Hot Rolled Plates Manufacturer & Suppliers.

Hot Rolled Astm A516 Gr70 Boiler Grade Carbon Steel Plate ...

Hot Rolled Astm A516 Gr70 Boiler Grade Carbon Steel Plate , Find Complete Details about Hot Rolled Astm A516 Gr70 Boiler Grade Carbon Steel Plate,Steel Plate,Carbon Steel Plate,Hot Rolled Astm A516 Gr70 Carbon Steel Plate from Steel Sheets Supplier or Manufacturer-Shandong Jingen International Trading Co., Ltd.

Hot Rolled Astm A516 Gr70 Carbon Steel Plate, Hot Rolled ...

Alibaba offers 134 hot rolled astm a516 gr70 carbon steel plate products. About 100% of these are steel sheets. A wide variety of hot rolled astm a516 gr70 carbon steel plate options are available to you, such as free samples.

A-516 Grade 70 Carbon Steel Plate 1M*2M*80MM Hot …

China A-516 Grade 70 Carbon Steel Plate Manufacturer Derbo Provides A-516 Grade 70 Carbon Steel Plate, Size 1M*2M*80MM, Hot Rolled, Oiled Treatment.

ASTM A516 Grade 70 Carbon Steel Plates

ASTM A516 GR.70 Carbon Steel Boiler Quality Plates Manufacturer in India, GR.70 ASTM A516 CS Plates, CS SA516 Grade-70 Plate Stockist, ASTM A516 Grade 70 Pressure Vessel Steel Plates Distributors, GR.70 Carbon Steel ASME SA516 Plate Exporter, ASTM A516 Grade 70 Carbon Steel HR Plate Dealer,SA516 Grade-70 CS Hot Rolled Plates Manufacturer & Suppliers.

ASTM A516 GR 60/70 Steel Plate-GNEE GROUP Discount Steel …

A516 Gr60/70 Boiler & pressure vessel steel plates,also named as pressurevessel steel plates which including carbon steel and alloy steel for High or intermediate and low temperature services.Main steel grades in boiler steel plates supplied by Xinsteel were approved by …

ASTM A516 Gr 70 NACE Plate, ASME SA516 GR.70 HIC Plate ...

RPF Pipes & Fittings - leading Suppliers of ASTM A516 Grade 70 NACE + HIC Carbon Steel Plate, ASME SA516 Gr 70 NACE HIC Steel Plates, A516 Gr 70 NACE Tested Pressure Vessel Plates, ASME SA516 Gr.70 HIC Tested Boiler Plate in Gujarat, India.

ASTM A516 Grade 70 HIC Resistant Steel Plates,ASME …

Superior Steel Oveseas is reputed manufacturer, supplier & exporter of ASTM A516 GR.70 HIC Resistant Plates.We supply these ASTM A516 Grade 70 Resistant Steel Plate which produced a sample is then tested to see if it meets the required of TM0284, with is the NACE standard for the Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking, using one of two ...

A516 Gr.70 Hot Rolled Plates Competitive Price steel plate ...

A516 Gr.70 steel is one of the most popular steel grades. As a A516 Gr.70 hot rolled plate supplier and exporter, BEBON STEEL will fabricate large stock A516 Gr.70 boiler steel plates with competitive price. It offers greater tensile and yield strength when compared to ASTM A516 Grade 60 and can operate in even lower temperature service.

ASTM A516 Gr 50 Carbon Steel Plate – Gnee Steel

14Cr1MoR 20g 15mo3 410b A516 Grade70 Pressure Vessel Steel Sheet 22) Carbon Steel Plate A299 A537 A225 Sm41b Low Carbon Steel Sheet A387 GR 2 heat-resisting steel plate and sheet A516 Gr. 55-70 A36 Gr. 36 A516 Gr. 60/A516 Gr. 70 A537 Boiler Steel Plate A537 Hot Rolled Boiler Steel Plate/Metal Steel Plate/Plate A537 Alloy steel plate ASME ASME ...

ASTM A516 Gr 70 NACE Plate, ASME SA516 GR.70 HIC Plate ...

ASME SA516 GR.70 HIC Plate is a carbon steel plate which has been further tested to demonstrate that it is resistant to hydrogen induced cracking. SA516 GR.70 HIC Boiler Quality Plates is mainly used for pressure vessel and boiler, oil and gas as well as petrochemical industries. HIC Tested ASTM A516 GR.70 Plates it is significantly affordable than austenitic stainless steel which helps to ...

ASTM A516 Grade 70 Steel Plate - Gaurav Ispat

Gaurav Ispat is a Professional ASTM A516 Grade 70 Steel Plate manufacturer in india,Plasma Cutting & Laser Cutting Mumbai India, Hot rolled mild steel plates, Ms Plates, Boiler Quality Plate, S355 steel plates, Sailma 350 Plate, DIN/EN Plates, Pressure Vessel Steel Plate, High Tensile steel plates, CS Plate and ASTM A36 steel plate types and sizes.

SA516 Grade 70 MT+LTV Hot Rolled Steel Plates - …

SA516 Grade 70 MT+LTV Hot Rolled Steel Plates : Manufacturers, Exporters, Stockist India & Suppliers Worldwide Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from India

Carbon Steel Plate - Ryerson

Carbon Steel Plate Carbon steel plate is used for a variety of applications requiring durability and strength. ... A572 Grade 50, A516 Grade 70, A514, AR400, AR500, 1020, 1045, 4140, ABS Grade A, ABS Grade AH36, ABS Grade DH/EH36 and API 2H Grade 50. ... Hot Rolled - Medium Carbon Steel, 1045. ASTM A830. Contact a Ryerson representative for ...

ASTM A516 Grade 60 Carbon Steel Plates ... - ganpatind

ASTM A516 Grade 60 Steel Plates, ASTM A516 Gr 60 Sheet, ASTM A516 Gr 60 Carbon Steel Plates, ASTM A516 Grade 60 Carbon Steel Sheets, ASTM A516 Grade 60 Sheets, ASTM A516 Gr 60 Hot Rolled Plates Supplier in Mumbai, India.

hot rolled sa516 grade 70 steel plate

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon Steel . Jul 12, 2009 Masteel supply high quality carbon steel plate for boiler and pressure TypicalMechanical Values of ASTM A516 Grade 70 / ASME SA516 Grade 70 in asever sour service plant, a vessel can be A516-70 N rolled with A350N flange. ..Hot Zones - Choosing the Right Hot Zone for your ...

ASTM A516 Grade 55|Grade 60|Grade 70 Pressure Vessel Steel …

ASTM A516 specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, plate products are available in four grades: Grades 55, 60, 65, and 70.

Carbon Steel A516 Gr.60/65/70 Sheet, Plate and Structurals

Alpha Overseas is one of the Leading Supplier & Exporter of Carbon Steel ASTM A516 Sheet, Plate and Structurals in India. We Keep Bulk Stock of Grade 60, 65 and 70 Carbon Steel or Mild Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) for quick delivery to Our Clients.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.