Tel: +86-371-86151827

ba finish plate different type of stainless steel

Steel grade:ba finish plate different type of stainless steel

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ba finish plate different type of stainless steel Introduction

2B, 2D and BA Cold Rolled Finishes

What Are Cold Rolled finishes?[PDF]

Guide to Stainless Steel Finishes

Mill Finishes GUIDE TO STAINLESS STEEL FINISHES 3 1D Hot rolled and annealed, and with the mill scale removed, this surface condition is classified as a 1D finish. This surface, which is found on thicker sheets and plate, is slightly coarse with very low reflectivity. It is …

What surface finishes are available on stainless steels?

There are many different types of surface finish on stainless steel. Some of these originate from the mill but many are applied later during processing, for example polished, brushed, blasted, etched and coloured finishes. The importance of surface finish in determining...

SSINA: Stainless Steel: Finishes

It is produced by Tampico brushing a No. 4 finish sheet in an oil and abrasive medium. This finish is sometimes seen on stainless steel architectural applications that were installed between about 1930 until the 1980’s, including the exterior columnar panels …[PDF]

Stainless Steel – Surface Finishes - Stealth 316

Stainless steel is polished by mills in a range of forms, e.g. sheet, plate, bar & tube, but all finishes may not be available on all forms. It is important, therefore, to check that the finish is available in the form required. 1D / 1E – Hot Rolled Plate. Hot rolled, softened (annealed) with the surface de-scaled.

Stainless Steel Surface Finishes - askzn.co.za

The surface finish on Stainless Steel should therefore be developed and maintained to ensure this vital property, and also for the secondary reason of the pleasing aesthetic appearance of Stainless Steel.

What are the Different Types of Stainless Steel? We Explain

Many different types of stainless steel grades are used in foodservice establishments, and each type has its own pros and cons. To make an informed decision when purchasing food grade stainless steel equipment, you should understand the major elements in the alloy, the different grading systems, and the main types of stainless steel.

Bright Annealed (BA) Unpolished Finish | Penn Stainless ...

Bright Annealed (BA) Unpolished Finish. Bright Annealed (BA) is produced by heat-treating (annealing) steel with a controlled atmosphere furnace. After heat-treatment, the steel has a reflective, mirror-like appearance, but may also have some imperfections and cloudiness. BA stainless steel can be buffed to attain a more reflective finish,...

Article: Specifying finishes for stainless steel flat ...

Specifying finishes for stainless steel flat products (sheet and plate) Introduction. Surface finishes for stainless steel sheet (coil, strip) and plates, are specified in BS EN 10088-2:2005. 'Stainless steels - Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes.'

304 Stainless Steel Sheet #4 Brushed Finish | Stainless Supply

304 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 304 stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 304 stainless steel sheet #4 finish meets the criteria for both the #3 and #4 finish.

What are the Different Stainless Steel Finishes? - Alliant ...

What are the Different Stainless Steel Finishes? The finish of any stainless steel product is extremely important, when choosing this material for decorative or functional purposes. On the other hand, when the stainless steel part is used in the interior of a machine or component, the finish may have a direct impact on the productivity of the ...

BA finish 300 series stainless steel plate - w3s.in

Type 304 is the most widely used alloy of all stainless steels. 300 Series Stainless steel alloys resist corrosion, maintain their strength at high temperatures and are easy to maintain. 300 series grades are inventoried in in stainless steel plate, sheet, bar, pipe, tube and structural products.304 Stainless Steel · 316/316L Stainless Steel ...

What are the Different Types of Stainless Steel? We Explain

Many different types of stainless steel grades are used in foodservice establishments, and each type has its own pros and cons. To make an informed decision when purchasing food grade stainless steel equipment, you should understand the major elements in the alloy, the different grading systems, and the main types of stainless steel.

Stainless Steel Finishing Options | Metal Supermarkets ...

However, it was soon discovered that some of these dull polished finishes had poor corrosion resistance, especially when exposed to seawater. Consequently a new surface finish description was introduced which remains in use to this day. Three more common stainless steel …

Aisi 430 Ferrite stainless steel plate 2B BA finish China ...

BBN steel offer Aisi 430 Ferrite stainless steel plate 2B BA finish stock in China,offer A36,A283 Grade C,A572,SA283 steel stocks and price in China,if you need Aisi 430 Ferrite stainless steel plate 2B BA finish,contact BBN steel now!

BA finish 300 series stainless steel plate

Type 304 is the most widely used alloy of all stainless steels. 300 Series Stainless steel alloys resist corrosion, maintain their strength at high temperatures and are easy to maintain. 300 series grades are inventoried in in stainless steel plate, sheet, bar, pipe, tube and structural products.304 Stainless Steel · 316/316L Stainless Steel ...

The basics of metal surface finishes - The FABRICATOR

thefabricator› Article› FinishingFirst, let’s focus on the different types of finishes. Sanitary Finish. If you are dealing with food-grade products, achieving a sanitary finish (Ra of 30 to 35 microinches) is vital. Preventing bacteria growth is the primary goal in these types of applications.

304 Stainless Steel Sheet #4 Brushed Finish | Stainless Supply

304 stainless steel sheet metal is a versatile, anti-rusting and heat resistant steel for general use. 304 stainless steel sheet metal uses include food equipment, plumbing materials, kitchen sinks, and back splashes. 304 stainless steel sheet #4 finish is austenitic, meaning it will not attract or hold a magnet.

Stainless Steel Sheet plate 304 Ba Finish - w3s.in

A wide variety of sus304 ba finish stainless steel sheet options are available to you, such as aisi, jis, and astm. You can also choose from plate, coil. As well as from iso, bv, and sgs. And whether sus304 ba finish stainless steel sheet is free samples. There are 384 sus304 ba finish stainless steel sheet suppliers, mainly located in Asia ...

Types of Finishes - Mirror - Grain - Williams Metalfinishing

Williams Metalfinishing Types of Finishes. It is produced by polishing the metal with a 120 - 180 grit belt or wheel finish. #4 Dairy or Sanitary Finish This finish is commonly used for the medical and food industry - almost exclusively used on stainless steel. Great care should be taken in removing the surface defects in the metal - like pits -...

304 Stainless Steel Sheet #8 Mirror | Stainless Supply

304 stainless steel sheet #8 mirror has a non-directional finish that virtually looks like a mirror. 304 stainless steel sheet #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. 304 stainless steel sheet #8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.

Anodized Finishes | Metal Finishing | Anoplate

Anoplate is set up to perform it on either Stainless Steel or other Nickel rich alloys (such Kovar and Invar). While it can be done on many base metals as a preplate operation, it is commonly done on Stainless Steel as a final finish.

CR Sheets, Cold Rolled Sheets, Hot Rolled Sheets ...

Products & Finishes. Standard Widths available are 1000 mm, 1250 mm, 1270 mm and 1600 mm Any other customized Width on CR/HR ranges from 21 mm to 1600 mm.[PDF]

STAINLESS STEELS - JFEスチール株式会社

Please consult us if you require these types of steel. Please contact us if you require special steel types other than those shown in the table. The proof test is conducted when specified.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.