Tel: +86-371-86151827

stainless steel cold drawing coil for fastener

Steel grade:stainless steel cold drawing coil for fastener

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

stainless steel cold drawing coil for fastener Introduction

Cold-drawn Spring Steel in Coils - severstalmetiz

Cold-drawn Spring Steel in Coils. GOST 14959. Application: Used for manufacture of front and rear suspension coil springs, stabilisers, various types of coil and leaf springs and a wide variety of machine parts and mechanisms. Description: Spring steel is a low alloy, medium carbon steel with a …

Cold Drawn Steel Wire, Standard or Special Profiles Shapes ...

Cold Drawn Steel Wire, Shaped Steel Wire in Coils and Straightened & Cut Lengths in Carbon, Alloy, Stainless and Tool Steels.

Carpenter - Trinamet Stainless for Fasteners Combines ...

New Stainless for Fasteners Combines Corrosion Resistance, High Hardness and Cold Formability ... Hardenable stainless steel alloys are a common choice for manufacturers that cold form high strength stainless steel fasteners. These alloys, however, have limitations. ... Trinamet stainless is available as mill-annealed STARR Wire® or cold drawn ...

Cold working | Valbruna Stainless Steel

The cold drawing operation can be carried out by coil to bar, coil-to-coil or from bar-to-bar. In general, except for few exceptions, all stainless steels can be drawn to some extent. Factors for successful drawing include the right choice of die angles, proper lubrication and the condition of the material.[PDF]

Heading Hints - Carpenter

Heading Hints A Guide to Cold Forming Specialty Alloys • Basics • Materials • Selection •Coatings ... of the information relates to stainless steel and high temperature alloys ... Why Cold Heading Is On the Increase Fasteners represent the single largest category of headed parts

316 Stainless Steel UNS S31600 | Ulbrich

316 Stainless Steel UNS S31600 Download Datasheet. Strip, Coil, Foil, Wire, ASTM A666, AMS5524 ... Type 316 (UNS 31600) is an austenitic chromium-nickel stainless steel containing molybdenum. This addition increases corrosion resistance, improves resistance to pitting chloride ion solutions and provides increased strength at elevated ...[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Extra-low-carbon Cold-Rolled Steel Sheets and Coils with excellent deep-drawing workability. Automobile oil pans, high roofs, extra deep drawn parts 2. Special-Purpose Cold-Rolled Steel Sheets and Coils Nippon Steel & Sumitomo Metal’s High-Strength Cold-Rolled Steel Sheets and Coils are classified into the following six[PDF]

COLD FORMING STAINLESS STEEL BAR AND WIRE

COLD FORMING STAINLESS STEEL BAR AND WIRE . 1 Design Versatility of ... itations to restrict the free flow of fresh ideas from design drawing boards. For example, consider the following: ... A typical application is cold forming hex-head cap screws, such as the one shown in Figure 5. Figure 4. Trimming

Magnetism in Stainless Steel Fasteners | Fastenal

"The stainless steel fasteners I received stick to a magnet." This is one of the more frequently heard complaints at Fastenal Engineering & Design Support HQ in Winona, MN. Stainless steel fasteners being nonmagnetic is also one of the largest misconceptions amongst fastener users.

Stainless Steel 304 | Elgin Fasteners

Do you need custom fasteners created with Stainless Steel 304? ... cold worked. Low carbon content means less carbide precipitation in the heat-affected zone during welding and a lower susceptibility to intergranular corrosion. Applications: beer kegs, bellows, chemical equipment, coal hopper linings, cooking equipment, cooling coils ...

Carpenter - How to Select the Right Stainless Steel or ...

Selecting the right stainless steel or high temperature alloy for a heading job presents no problem if the fastener manufacturer meets required material specifications. ... This popular grade is available in several different cold drawn conditions to meet specified property requirements after heat treatment. ... Headers sometimes may be misled ...[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Extra-low-carbon Cold-Rolled Steel Sheets and Coils with excellent deep-drawing workability. Automobile oil pans, high roofs, extra deep drawn parts 2. Special-Purpose Cold-Rolled Steel Sheets and Coils Nippon Steel & Sumitomo Metal’s High-Strength Cold-Rolled Steel Sheets and Coils are classified into the following six

15 Degree Wire Coil Nails | Fastener USA

15 Degree Wire Weld Coil Nails are used for sheathing, fencing, hardi siding, shake & shingle, framing, and much more. We offer a variety of 15 degree wire collated coil nails that can be used for a …[PDF]

Stainless Steel Wire & Bar - Atlas Steels

2.Coil I.D. at Atlas option, unless otherwise agreed. The I.D. quoted above is the diameter of the final drawing block. Subsequent coil strapping may slightly reduce its I.D. 3.As well as catch-weight coils with dimensions and weights above, heading wire, cold drawn wire, bright drawn wire and bright annealed wire may be

China Cold Heading Wire Ml20mntib for Making Fasteners ...

Steel Wire, Ml20mntib, Fastener manufacturer / supplier in China, offering Cold Heading Wire Ml20mntib for Making Fasteners Spheroidized Annealed Boron Drawn Steel Wire, Cold Heading Quality Drawn Steel Wire 1035K with Phosphate Coated and Lubed Saip Annealed Medium Carbon Fastener Used Steel Wire, Cold Heading Drawn Wire 35K with Phospahte Coated and Lubed Saip Annealed Medium Carbon Steel ...

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Heat- and corrosion-resistant, lightweight yet strong, durable and fully recyclable, stainless steel coil, strip and sheet is exceptionally versatile. Cold rolled coil, strip and sheet are produced in all stainless steel types: austenitic, ferritic, duplex and martensitic. A wide selection of standard and special surface finishes provide a ...

Metals & Alloys - Ferralloy Inc.

We offer a wide variety of materials, including steels of all grades and temper as well as exotic and heat resistant alloys. In addition to high-nickel and stainless steel alloys that offer exceptional performance in extreme conditions, we offer other metals such as aluminum, zirconium and titanium.

15° Wire Coil, Full Round Head, Ring-Shank Siding Nail ...

Cold-Formed Steel Connectors; Integrated Component Systems; ... 15° Wire Coil, Full Round Head, Ring-Shank Siding Nail . On This Page. Product Details. Combine the short-term benefit of increased fastening efficiency and the long-term benefit of stainless-steel fasteners with these stainless-steel wire-coil collated siding nails.

Tube Mills, Coil Processing Equipment, Headers - National ...

Coil Processing Cold Headers Cut-Offs/Saws Cut-to-Length Lines Draw Benches Extrusion Presses Eyelet/Transfer Presses Fastener Equipment Four Slides/Multi Slides Forging Equipment Impact Extrusion Presses Knuckle Joint Presses Nail Making Machines Nut Formers Parts Formers Plate Rolls Presses Press Brakes Progressive Die Headers Roll Formers ...

Cold Heading Wire manufacturers & suppliers

Cold Heading Wire manufacturers & suppliers. View: List View ... Phosphate Coated and Lubed Saip Annealed Cold Drawn Wire Swch15A for Making Screws and Bolts Cold ... Black Steel Wire Steel Wire Rope Galvanized Wire Iron Wire Steel Wire Coil Black Iron Wire Stainless Steel Flat Wire Zinc Coated Steel Wire Galvanised Wire Stainless Steel Fine ...

Titanium Bolt - Buy Fastener Product on Alibaba

Carbon Steel Coil or Sheet. (GI ,PPGI, EG, HGI , CGI ), flat bars, flat bars with round edges, channel bars, angle bars, I-bars , non-slip bars, small channel bars,cold drawing bars Meanwhile, Aguila Fastener Co., Ltd . is committed to continuous growth and establishing strong partnership with its customers and suppliers providing long term ...[PDF]

ISSF Applications for Stainless Steel Long Products

of the many uses for stainless steel long products. ... cold-drawing operation. Most of the bars are machined into a wide variety of parts, some of them ... Applications for Stainless Steel Long Products Page 8 Nedujinja Shrine Bridge Why stainless? • Good mechanical properties[PDF]

COLD FORMING STAINLESS STEEL BAR AND WIRE

COLD FORMING STAINLESS STEEL BAR AND WIRE . 1 Design Versatility of ... itations to restrict the free flow of fresh ideas from design drawing boards. For example, consider the following: ... A typical application is cold forming hex-head cap screws, such as the one shown in Figure 5. Figure 4. Trimming

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.