Tel: +86-371-86151827

automobile use high tensile carbon steel plate

Steel grade:automobile use high tensile carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

automobile use high tensile carbon steel plate Introduction

[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

Steel Plate & Sheet Steel Plate, Floor Plate & Sheet Products. 3-2 alro 888-888-ALRO 2 5 7 6 Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; ... Steel Plate Tensile and Hardness Requirements and Sheet Note 1 –See the Orientation ...

Carbon Steel Properties - ScienceStruck

Carbon Steel Properties. Medium carbon steel is used in the manufacture of domestic appliances, car bodies, chips, etc. High carbon steel is used to manufacture high strength products like knives, blades, cutting tools, etc. This is because high carbon steel can …

Carbon Steel: Plates & Perforated Metal - Grainger ...

Shop for a carbon steel plate for your building and industrial projects, as well as perforated metal, in a number of gauges and design specifications to meet your requirements. Find various types including low, medium and high carbon with varying tensile strength.

High-Carbon Steels - an overview | ScienceDirect Topics

Subcritical annealing methods are used to increase the machinability of high carbon steels or for softening worked-hardened mild steels to allow further cold work to be applied. The steel is heated to a temperature above which recrystallisation will take place but below the lower critical temperature (LCT) of …[PDF]

Ultra High-Strength Steel Sheets for Bodies, …

In response to these requirements, automakers are increas- ingly applying high tensile strength steel to automo- bile bodies as a weight reduction measure. When used to improve the strength of auto body parts, high-strength steels make it possible to reduce weight by reducing part thickness.

automobile carbon steel coil - alibaba

Alibaba offers 4,894 automobile carbon steel coil products. About 6% of these are steel sheets, 1% are stainless steel sheets. A wide variety of automobile carbon steel coil options are available to you, such as aisi, en, and astm.[PDF]

High Strength Steel Sheets for Automobile Suspension …

High Strength Steel Sheets for Automobile Suspension and Chassis Use—High Strength Hot-Rolled Steel Sheets with Excellent Press Formability and Durability for Critical Safety Parts— base material increases. However, when the strength level exceeds 590MPa, conventional hot-rolled sheets show a smaller increase in the fatigue limit relative toCited by: 11

jsc270c steel - carbon-steeltube

Steel Specification. Carbon (C ) Manganese ... 0.2200 1.0400 75.0000 JSC270C ... Documents Similar To Steel Specifications. Skip carousel. JSC270C JFS :: Total Materia. JSC270C, JFS, A 2001, Cold rolled steel sheets and strip for automobile use. JSC270C automotive steel plate | LinkedIn. JSC270C steel plate is a commercial quality cold rolled steel.

Classification of Carbon and Low-Alloy Steels

Carbon Steels

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel. They have a carbon content between 0.05–0.25% to retain formability and weldability. Other alloying elements include up to 2.0% manganese and small quantities of copper, nickel, niobium, nitrogen, vanadium, chromium, molybdenum, titanium, calcium, rare …Classifications·

Automobile Galvanized Steel Coil Wholesale, Coil Suppliers ...

Alibaba offers 8,739 automobile galvanized steel coil products. About 71% of these are steel sheets, 1% are stainless steel sheets, and 1% are other metal & metallurgy machinery. A wide variety of automobile galvanized steel coil options are available to you, such as coil, plate.[PDF]

Ultra High-Strength Steel Sheets for Bodies, …

In response to these requirements, automakers are increas- ingly applying high tensile strength steel to automo- bile bodies as a weight reduction measure. When used to improve the strength of auto body parts, high-strength steels make it possible to reduce weight by reducing part thickness.[PDF]

Hot-Rolled Steel Sheets and Coils

Hot-Rolled Steel Sheets and Coils for Automobile Structural Uses SAPH310 310 ≦ SAPH370 370 ≦ SAPH400 400 ≦ SAPH440 440 ≦ Types Standards Features Examples of Use High-Strength Hot-Rolled Steel Sheets and Coils with Automobile Formability NSHA490 NSHA540 NSHA590 NSHA690 NSHA780 NSHA980 They can be used for a wide range of

jsc270c steel - carbon-steeltube

Steel Specification. Carbon (C ) Manganese ... 0.2200 1.0400 75.0000 JSC270C ... Documents Similar To Steel Specifications. Skip carousel. JSC270C JFS :: Total Materia. JSC270C, JFS, A 2001, Cold rolled steel sheets and strip for automobile use. JSC270C automotive steel plate | LinkedIn. JSC270C steel plate is a commercial quality cold rolled ...

Sheet Steel Technology for the Last 100 Years: Progress in ...

The trends of the use of high-tensile steels were studied and documented in “High Strength Steel Handbook 4) ”, as the result of a survey in 2002 by the Joint Study Group of Materials for Automobiles organized by the Iron and Steel Institute of Japan and the Society of Automotive Engineers of Japan.

SPFC 590 high strength steel plate from Japan - Best Chian ...

Thinner high tensile steel plate can satisfy safety standards more than common steel plate can do, so that it can meet requirements of light weight of automobile businessHigh Tensile Steel(SAPH440 ... rail levers and parking brake of automobiles SPFC 440, SPFC490, SPFC590 Drawing Quality This is high strength steel made ... Trader. HYUNDAI ...

taiwan steel coil hot rolled coil - Henan BBN

Carbon steel plate SS400 S275jr S235JR; A36 Q235 hot rolled pickled carbon; astm a786 steel checker plate black; Automobile Use High Tensile Galvanized Carbon; Hot rolled A285 grade C 16mm; pipe tube for green house hot; astm a516 grade 60 70 carbon; ASTM A36 and A572 t100x1800x6000 stainless; Factory Directly sell astm a36 tensile; astm a36 ...

JSC590R steel - pressure-vessel-steel

JSC590R auto steel max. carbon content is 0.12%. The auto steel minimum tensile ... JSC590R car steel plate - Makepolo International. JSC590R car steel plate, Find Baosteel & Automobile structure steel plate JSC590R car steel plate, China import & Supplier or Manufacturer - Shanghai Aoming ... Cold-Rolled and Galvannealed (GA) High …

7 Things To Consider When Choosing A Carbon Steel Grade ...

Grades of lower carbon steel such as C1010 and C1018 have good machinability. Alternatively, carbon steel with higher amounts of carbon such as C1141 and C1144 can also be machined without difficulty due to the sulfur that is added to their chemical composition.[PDF]

General Catalog of TOOL STEELS - 日立金属株式会社

Cold work dies for high-tensile steels, SUS, mass production, and general use. Cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Cold work dies for general use, forming roll, shear blade.

Development of iron and steel into eco-material ...

Present passenger cars have achieved some 5% decrease in weight by the use of high-tensile steel, compared with those in and around 1970. Furthermore, in the future, nearly 10% reduction in weight is expected by increasing the use ratio of high-tensile steel. 3.2. Development of materials enabling high-efficiency power generation

Steel SPH440 - carbon-steeltube

Suitable heat treatment can see this grade attain the highest hardness, strength and wear resistance of any stainless steel. This is due to the high carbon content. SAPH400 Automotive steel - automobile-steel. SAPH400 Automotive steel.[PDF]

High Strength Steel Sheets for Automobile Suspension …

JFE TECHNICAL REPORT No. 4 (Nov. 2004) 27. High Strength Steel Sheets for Automobile Suspension and Chassis Use—High Strength Hot-Rolled Steel Sheets with Excellent Press Formability and Durability for Critical Safety Parts—. with a size of approximately 3nm have precipitated in rows.

High Strength Hot Rolled Steel Sheet for Automobile – A ...

The application of hot rolled high-strength steel sheets to the chassis components, which leads to considerable weight reduction, is expected to expand rapidly in the coming years. It is, therefore, demanded to develop as hot rolled high-strength steel sheets …

A656 Structural, Carbon & HSLA Steel Plate - BBN Steel

A high-strength, low-alloy, hot-rolled structural steel plate utilized in structural applications where lighter weight and improved formability is critical. Applications include: truck frames, crane booms, and rail car …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.