Tel: +86-371-86151827

stainless steel sheet price 316 finish surface

Steel grade:stainless steel sheet price 316 finish surface

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

stainless steel sheet price 316 finish surface Introduction

[PDF]

Stainless Steel – Surface Finishes - Stealth 316

Stainless Steel – Surface Finishes Introduction Surface finish is an important element in any specification of stainless steel regardless of the intended use. For those applications where appearance is important, finish is a design element and must be specified. In non-decorative applications the surface finish …[PDF]

Guide to Stainless Steel Finishes

GUIDE TO STAINLESS STEEL FINISHES 2G A uniform uni-directional surface that has low reflectivity. The coarse finish restricts it to internal applications. The profiled stainless steel sheet clad counters of this Bank in Flensburg, Germany, were ground to provide a lively contrast to the smooth wooden surfaces. Mechanically applied finishes may ...

Metals Depot® - Stainless Sheet Type 316 | Shop Online!

316/316L Stainless Steel Sheet, is a popular grade of stainless where superior corrosion resistance is of primary importance. 316 Stainless sheet is widely used in marine and highly acidic environments, underwater equipment, surgical tools, food and pharmaceutical applications.The addition of molybdenum increases the corrosion resistance of 316 Stainless over the more economical 304 grade.

What surface finishes are available on stainless steels?

What surface finishes are available on stainless steels? There are many different types of surface finish on stainless steel. Some of these originate from the mill but many are applied later during processing, for example polished, brushed, blasted, etched and coloured finishes.

316/ 316L 8K finish - deysteel

About 316: 316 stainless steel (06Cr17Ni12Mo2) has excellent oxidation resistance in discontinuous use at 871 degrees C (1600 degrees F) and for continuous use at 927C degrees (1700 degrees F). At 427 degrees C-857 degrees C (800 degrees F-1575 degrees F) range, it is best not to continue to use 316 stainless steel,...

316L Stainless Steel Sheet 2B Mill Finish | Stainless Supply

316L stainless steel sheet 2B finish has a mill finish, which is smooth and NOT the brushed finish commonly seen on kitchen appliances. Our 316L stainless steel sheet 2B finish will not have a protective film to prevent scratching, so the 316L stainless steel will commonly have scratching (not gouging) from when it is cut to size, fabricated, shipped, etc.

316 Stainless Steel Sheet, Unpolished (Mill) Finish ...

amazon› …› Stainless Steel› Stainless Steel SheetsThe 316 stainless steel sheet has an unpolished (mill) surface, has been annealed, meets American Society for Testing and Materials International ASTM A240 specifications, and has a standard tolerance.User rating: 3.8/5

316 Finish Stainless Steel, 316 Finish Stainless ... - Alibaba

China factory best grade 201 304 316 mirror finish stainless steel sheet bending machine/316 stainless steel sheet price per kg. US $1000-2100 / Ton. 1 Ton (Min.

Surface finishes of stainless steel sheets - Metal Working ...

Surface finishes of stainless steel sheets Posted by Giusy De Donno on 28 July 2014 in Sheet metal · 0 Comments Detail of surface finish of a stiffened metal sheet drawn from a multi-head state-of-the-art weighing machine.

316L Stainless Steel Sheet #4 Finish | Stainless Supply

316L stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 316L stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation.

316 Stainless Steel Sheet, Unpolished (Mill) Finish ...

amazon› …› Stainless Steel› Stainless Steel SheetsThe 316 stainless steel sheet has an unpolished (mill) surface, has been annealed, meets American Society for Testing and Materials International ASTM A240 specifications, and has a standard tolerance.Reviews: 5

Guide to Stainless Steel Sheet Finishes | Mill, Polished ...

Stainless Steel Sheet Finishes. An intermediate polished surface obtained by finishing with a 120-grit abrasive. A directional course "grain" running in one direction. Used in heavy use areas or can be further polished after fabrication. Our #3 polish stainless sheets come with peel off protective covering on one side that can be removed after the material is installed.

316 grade Stainless steel sheet with BA surface finish

If a scratch free surface is needed, please contact Stainless Supply to inquire about 316L stainless steel sheet metal, also called marine grade stainless steel, grades and surface finishes of stainless steel - Winegrowers Supplies. Grade 316 stainless steel is chromium 18% + nickel 8% + molybdenum 3% (known as 18/8/3).

Stainless Steel Finishing Options | Metal Supermarkets ...

There are a number of stainless steel finishing options that alter more than just the appearance of the material. Whatever the intended use, choosing the right finish option is essential. In projects when design is a primary consideration, an attractive finish will enhance the appeal of the end-product.

Stainless Steel Sheet | eBay

ebay› …› Metals & Alloys› Metal Sheets & Flat StockYou are purchasing one18 gage 12" x 4" - stainless steel 304 plate, piece may have some minor deformity's from the shear or CNC turret punch these are great for welding fabricating, mill or lathe work, practicing your welding or craft and hobbies.[PDF]

Leveraging Stainless Steel Finishes on Sanitary …

2B Mill Finish This is a widely used stainless steel finish, com- mon in industrial, chemical and food applications. It is corro- sion resistant and has a typcial RA range of 40 (7 gauge) to 15 (16 gauge) microinches. No. 3 Finish The No. 3 Finish uses a 120 grit abrasive.[PDF]

Roughness measurements of stainless steel surfaces

roughness measurements of stainless steel surfaces can be performed quickly and easily using the simplified procedure for roughness inspection given in Annex A, EN ISO 4288 [5], [6].

2B vs. No. 4 Stainless Steel Finish | All Metals Fabrication

The 2B mill finish is achieved with an additional light cold roll pass, and is the standard finish for 201, 301, 304, 304L, and 316L stainless steel. Stainless steel with a 2B finish is generally used for bakeware and flatware, plumbing fixtures, solar panels, industrial equipment, and wheel covers.

2B BA Surface Finish 304 316 Cold Rolled Stainless Steel ...

2b Ba Surface Finish 304 316 Cold Rolled Stainless Steel Sheet Plate Price , Find Complete Details about 2b Ba Surface Finish 304 316 Cold Rolled Stainless Steel Sheet Plate Price,Cold Rolled Stainless Steel Sheet Plate,Cold Rolled Stainless Steel Sheet Plate,Cold Rolled Stainless Steel Sheet Plate from Stainless Steel Sheets Supplier or Manufacturer-Zhejiang BMJ Metal Co., Ltd.

Stainless Steel Sheet-Type 304-Type 316 - Cut2Size Metals

Stainless steel sheet is available in Type 304 and Type 316. Type 304 can be easily roll-formed or bent, and its excellent corrosion resistance and weldability make it one of the most popular grades. Type 316 is a high corrosion resistance alloy, providing greater resistance to pitting-type corrosion.

316/316L Sheet / Plate - Online Metal Store

316/316L Sheet / Plate. Stainless Steel Sheet T-316/316L also known as marine grade, provides corrosion and pitting resistance in more aggressive environments, making it ideal for applications involving salt water, acidic chemicals, or chloride containing media. Stainless 316 is also commonly used in the food and pharmacy industry where it is ...

MetalsDepot® - T304 Stainless Steel Sheet

Stainless Steel Sheet - 304. Finishes: 2B Mill (dull), #4 Brushed (appliances), #8 Mirror Applications: sanitary dairy, beverage and food product handling and processing, hospital equipment, marine hardware, kitchen appliances, back splashes, etc. Workability: Easy to Weld, Cut, Form and Machine with proper equipment.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.