Tel: +86-371-86151827

aisi 4340 alloy structure steel sheet

Steel grade:aisi 4340 alloy structure steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aisi 4340 alloy structure steel sheet Introduction

AISI 4340 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 4340 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.Carbon Steel · Stainless Steel · Tool Steel And Hard Alloy

AISI/SAE 4340 datasheet,AISI/SAE 4340 chemical,AISI/SAE ...

Technical specification of SAE/AISI/UNS system standard alloy structural steel AISI 4340 data sheet, SAE 4340 Chemical compositions, AISI 4340 Mechanical properties from Steelmaking, ESR melted, Blooming, Hot forging,Hot rolling,Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining.

AISI 4340 Steel | 36CrNiMo4 - Otai Special Steel

Project Description. AISI is a medium carbon, low alloy steel known for its toughness and strength in relatively large sections. AISI 4340 is also one kind of nickel chromium molybdenum steels. 4340 alloy steel is generally supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.

AISI/SAE 4340 Alloy Steel- 4340 Steel Properties | All ...

General characteristics of Alloy Steel 4340. 4340 is a nickel-chromium-molybdenum alloy steel known for its toughness and its ability to attain high strengths in the heat-treated condition. It has very good fatigue resistance. This alloy, 4340, may be heat treated to high strength levels while maintaining good toughness,...

AISI 4340 Steel - Dongguan OTAI Special Steel Co

AISI 4340 Steel Material-ASTM A29/A29M. Otai special steel have more 16 years experience in 4340 steel plate, round bar, flat bar, square bar, hexagonal bar, sheet, pipe and worm gear supply. Aisi 4340 Steel is a high quality Quenched and Tempered Alloy Structural steel, Oil Quenched & Tempered Hardness is 28-34 HRc.4340 Annealing delivery hardness less than 250HB.

Alloy Steel 4340 - Continental Steel & Tube Company

Alloy Steel 4340. Alloy Steel 4340, also referred to as AISI 4340, is a nickel, chromium, and molybdenum alloy steel. This heat treatable alloy is known for its toughness and high-strength in a heat-treated condition. It is weldable by both fusion and resistance welding, and offers good ductility in …

aisi 4340 alloy structure steel - pond-pro

Aisi 4340 Steel is a high quality Quenched and Tempered Alloy Structural steel, Oil Quenched & Tempered Hardness is 28-34 HRc.4340 Annealing delivery hardness less than 250HB. 4340 Alloy structural steel properties is very simliar with GB 40CrNiMo steel, JIS SNCM439 and DIN 1.6511 36CrNiMo4 Alloy structural steel.

AISI E4340 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI E4340 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

AISI 4340 Steel - Dongguan OTAI Special Steel Co

Otai special steel have more 16 years experience in 4340 steel plate, round bar, flat bar, square bar, hexagonal bar, sheet, pipe and worm gear supply. Aisi 4340 Steel is a high quality Quenched and Tempered Alloy Structural steel, Oil Quenched & Tempered Hardness is 28-34 HRc.4340 Annealing delivery hardness less than 250HB.

AISI/SAE 4340 datasheet,AISI/SAE 4340 chemical,AISI/SAE ...

Technical specification of SAE/AISI/UNS system standard alloy structural steel AISI 4340 data sheet, SAE 4340 Chemical compositions, AISI 4340 Mechanical properties from Steelmaking, ESR melted, Blooming, Hot forging,Hot rolling,Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining.

AISI/SAE 4340 Alloy Steel- 4340 Steel Properties | All ...

AISI/SAE 4340 Alloy Steel, 4340, is a nickel-chromium-molybdenum alloy steel known for its toughness and its ability to attain high strengths in the heat-treated condition. Commercial and military aircraft, automotive systems, forged hydraulic and other machine tool applications, forged steel crankshafts.

Alloy Steel 4340 - Continental Steel & Tube Company

Alloy Steel 4340. Alloy Steel 4340, also referred to as AISI 4340, is a nickel, chromium, and molybdenum alloy steel. This heat treatable alloy is known for its toughness and high-strength in a heat-treated condition. It is weldable by both fusion and resistance welding, and offers good ductility in …

Aircraft Alloy Steel AISI 4340 / E-4340

Technical Data Sheet. Alloy E 4340 is a widely used deep-hardening constructional steel. Due to E-4340's high alloy content it obtains a uniformed hardness by heat treatment. The high fatigue strength makes E4340 ideal for highly stress parts as it maintains …

4340 Steel Suppliers: Plate, Sheet | Rickard Metals

4340 alloy steel (also known as AISI 4340) is a low alloy steel with high toughness in an annealed state. 4340 alloy steel is characterized by its outstanding ductility, formability, and weldability rendering it an excellent metal for a variety of structural applications and components including power transmission gears and shafts, aircraft parts, and machinery. 4340 steel is mainly iron based ...

Aisi 4340 Alloy Steel Sheets, Aisi 4340 Alloy Steel Sheets ...

Aisi 4340 alloy steel sheets products are most popular in Southeast Asia, North America, and South Asia. You can ensure product safety by selecting from certified suppliers, including 13 with Other, 13 with ISO9001, and 9 with OHSAS18001 certification.

4340 - Alloy Steel Grade - Universal Metals

universalmetals› Alloy Steel GradeOverview. 4340 steel has outstanding harden-ability and high-strength characteristics. Ideal for highly stressed parts operating under severe conditions, aircraft quality AISI 4340 steel alloy material is excellent for shafts and valves that are subject to extreme conditions. The term Aircraft Quality...

4130 (E4130) Alloy Steel, AISI 4130 (E4130), Sheet, Plate ...

AISI 4130 Aircraft Quality Steel Cut to Size and Delivered Quickly. With the largest stocked inventory of aircraft quality steel, Benedict-Miller delivers the best chromoly 4130 (E4130) alloy steel sheet, plate, or round bar cut and finished to your specifications when you need it.

Low Alloy Steel Properties 4340 Steel Sheet - w3s.in

4340 Steel Suppliers: Plate, Sheet | Rickard Metals. 4340 alloy steel (also known as AISI 4340) is a low alloy steel with high toughness in an annealed state. 4340 alloy steel is characterized by its outstanding ductility, formability, and weldability rendering it an excellent metal for a variety of structural applications and components ...

AISI 4340 HT Steel | Double Eagle Alloys

doubleeaglealloys› Products› Carbon Alloys/ProductsAISI 4340 Steel (UNS G43400) Description. 4340 alloy steel is a medium carbon nickel-chromium molybdenum alloy steel that creates an excellent combination of ductility, toughness, and strength after heat treating. It has good shock and impact resistance as well as wear and abrasion resistance in the hardened condition.

4340 | ALLOY | In Stock | Castle Metals Site

Alloy 4340 in Plate SPECIFICATIONS: AISI4340, ASTM A 829 / A6 SAE J404, AMS 2252/ 2301/6359 SAE J404 Castle Metals stocks Alloy 4340 plate through our global distribution network. Our service centers are located throughout the U.S., Canada, Mexico, U.K, France, Singapore, and Shanghai. Customers calling us for 4340 plate a lot of times are frustrated with on-time delivery issues.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.