Tel: +86-371-86151827

carbon high tensile 65mn steel sheet in china

Steel grade:carbon high tensile 65mn steel sheet in china

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

carbon high tensile 65mn steel sheet in china Introduction

ASTM 313 High Tensile Spring Steel Wire In Grade 1070 65Mn

China 65mn SAE1070 SAE1080 Customized Packing Spring Steel . Wire, Spring Wire, Steel Wire manufacturer / supplier in China, offering 65mn SAE1070 SAE1080 Customized Packing Spring Steel Spoke Wheels Wire, High Carbon Black Round Woven Steel Mesh Wire, High Carbon Black Round Mechanical Steel Wire and so on.

65Mn Spring Steel - Special steel china supplier-OTAI ...

65Mn Spring Steel | 080A67 | 1066 -GB/T 1222. And Otai Special Steel supplly in GB 65Mn Spring Steel round bar, flat bar., rod bar, wire and plate supply. Moreover, GB 65Mn Steel is a high quality Alloy Spring Steel, and it belong to the high quality high carbon alloy Spring Steel.Its Quenched & Tempered Hardness is 28-34 HRC. 65Mn steel under Annealing delivery hardenss less than 250HB.

China Steel 65mn, Steel 65mn Manufacturers, Suppliers ...

China Steel 65mn manufacturers - Select 2019 high quality Steel 65mn products in best price from certified Chinese Steel Plate manufacturers, High Carbon Steel suppliers, wholesalers and factory on Made-in-China

Steel 65mn Price, China Steel 65mn Price Manufacturers ...

Steel 65mn Price - Select 2019 high quality Steel 65mn Price products in best price from certified Chinese Excellent Carbon Steel 65mn manufacturers, Cold Rolled Steel Coil 65mn suppliers, wholesalers and factory on Made-in-China, page 2

China GBT 65Mn steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 65Mn can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

65Mn | Stainless Steel Sheet Manufacturer&Supplier

After heat treatment and cold drawing hardening, 65Mn has high strength and a certain ductility; under the same surface state and complete quenching, the fatigue limit is similar with alloy spring steel.

supplier of 65mn tensile strenght,A36,Q235B,Q345B steel ...

Steel Information - CASiberia65Mn. 65Mn is a readily-available Chinese steel that is formulated to provide good wear resistance and hardness. The medium-high carbon content makes for a high degree of toughness and resilience, while the manganese, in addition to improving these properties, ...

Carbon Steel Wire - mielemetal

Natural High Carbon Mattress Spring Steel Wire for Bedding; Q235 SS400 Mild Carbon Steel Sheet; Welding 304 stainless steel plate; 1020 20 seamless round pipe; High strength 430 seamless pipe; GB 40Mn Carbon Steel Round Bar stockists and manufacturer in China; 3003 conventional welding aluminum coil; Black Wire Low Carbon Steel Wire For Nail Making

65MN Steel - Special Steel

Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970. Alloy and Carbon Steel. Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels.

Black High Tensile Strength Round Spring Wire China ...

We have a wide selection at great prices to help you get creative. All the High Tensile Strength Black Wire are quality guaranteed. We are China Origin Factory of High Tensile Strength Black Spring Wire. If you have any question, please feel free to contact us. Product Categories : Spring Steel Wire > High Carbon Spring Steel Wire

China High Carbon Rolled Steel, China High Carbon Rolled ...

China High Carbon Rolled Steel, China High Carbon Rolled Steel Suppliers and Manufacturers Directory - Source a Large Selection of High Carbon Rolled Steel Products at carbon steel pipes ,carbon steel ,carbon steel fittings from China Alibaba

Steel Q355 steel - carbon-steeltube

China Building Structure High Strength Steel Plate A36/Q235/Ss400, Find details about China High Strenght Steel Sheet, Steel Plate and Sheet from Building Structure High Strength Steel Plate A36/Q235/Ss400 - Hebei Yaxu Trade Co., Ltd.

supplier of 65mn tensile strenght,A36,Q235B,Q345B steel ...

Steel Information - CASiberia65Mn. 65Mn is a readily-available Chinese steel that is formulated to provide good wear resistance and hardness. The medium-high carbon content makes for a high degree of toughness and resilience, while the manganese, in addition to improving these properties, ...

Carbon steel strip Manufacturers & Suppliers, China carbon ...

carbon steel strip manufacturer/supplier, China carbon steel strip manufacturer & factory list, find qualified Chinese carbon steel strip manufacturers, suppliers, factories, exporters & wholesalers quickly on Made-in-China.

Black High Tensile Strength Round Spring Wire China ...

We have a wide selection at great prices to help you get creative. All the High Tensile Strength Black Wire are quality guaranteed. We are China Origin Factory of High Tensile Strength Black Spring Wire. If you have any question, please feel free to contact us. Product Categories : Spring Steel Wire > High Carbon Spring Steel Wire

Grade 65Mn High Carbon Spring Steel Properties ...

65Mn high carbon steel is mainly used in the manufacture of various small-section flat springs, round springs, clockwork, etc. It can also be used to manufacture spring rings, valve springs, shock absorbers, clutch reeds and brake springs.

China High Carbon 65mn Steel Flat Bar - China 65mn Steel ...

65mn Steel Flat Bar, 65mn Steel, 65mn manufacturer / supplier in China, offering High Carbon 65mn Steel Flat Bar, 3mm Low Carbon Mild Soft Steel Wire, 2.5mm Low Carbon Steel Mild Soft Wire and so …

Steel Q355 steel - carbon-steeltube

China Building Structure High Strength Steel Plate A36/Q235/Ss400, Find details about China High Strenght Steel Sheet, Steel Plate and Sheet from Building Structure High Strength Steel Plate A36/Q235/Ss400 - Hebei Yaxu Trade Co., Ltd.

China 65mn / ASTM 1065 High Carbon Spring Steel - China ...

65mn Spring Steel, 1065 High Carbon Steel, ASTM 1065 Spring Steel manufacturer / supplier in China, offering 65mn / ASTM 1065 High Carbon Spring Steel, Ceramic Fiber Blanket (1260STD-1260HP-1350 HA-1400DZ-1430Hz), Ceramic Fiber Twisted Rope Cnbm and so on.

China Baosteel High Strength 65mn Steel Plate Prices ...

Steel Plate, Alloy Steel Plate, High Strength Steel Plate manufacturer / supplier in China, offering Baosteel High Strength 65mn Steel Plate Prices, Air-Conditioner Aluminium Foil with Polished Finish, Pharmacy Aluminium Foil with Carton Box Package and so on.

65Mn | Stainless Steel Sheet Manufacturer&Supplier

After heat treatment and cold drawing hardening, 65Mn has high strength and a certain ductility; under the same surface state and complete quenching, the fatigue limit is similar with alloy spring steel.

65mn steel steel - carbon-steeltube

China Steel 65mn manufacturers - Select 2018 high quality Steel 65mn products in best price from certified Chinese Steel Plate manufacturers, High Carbon Steel suppliers, wholesalers and factory on Made-in-China. 65Mn / ASTM 1065 High Carbon Spring Steel, View 65Mn ...

GB High Quality Carbon Structural Steel 30mn 50mn Steel ...

Steel Tube, Steel Pipe, Seamless Steel Pipe manufacturer / supplier in China, offering GB High Quality Carbon Structural Steel 30mn 50mn Steel Pipe of Steel Tube in China, Incoloy 800 High Temperature Alloy Cold-Rolled / Hot-Rolled Steel Sheet/Strip / Coil / Wire, Nickel Alloy Incoloy 800h Nickel Alloyuns N08810 Coil / Belt / Strip/Round and so on.

65Mn hot rolled steel coil Made in China

310s stainless steel sheet with high luster; stainless steel rectangle bar price per kg; standard size mild carbon steel pipe; 2 in 1round usb cable; sus302 304 stainless steel sheet; Low Carbon Steel Plate; 65Mn hot rolled steel coil Made in China; stainless steel channel frame; Ms Carbon Steel Erw Steel Pipe; highway guardrail roll forming ...

Carbon Steel Wire - mielemetal

Natural High Carbon Mattress Spring Steel Wire for Bedding; Q235 SS400 Mild Carbon Steel Sheet; Welding 304 stainless steel plate; 1020 20 seamless round pipe; High strength 430 seamless pipe; GB 40Mn Carbon Steel Round Bar stockists and manufacturer in China; 3003 conventional welding aluminum coil; Black Wire Low Carbon Steel Wire For Nail Making

High Quality Tensile Strength Of Steel Angle Bar - w3s.in

Carbon Steel, High-Strength-Low Alloy, Stainless Steel ...ASTM A-36 is produced to mechanical properties offering a minimum yield of 36 KSI and a minimum tensile strength 58 KSI. A-36 Bars are designed to be used in structural applications. HIGH STRENGTH LOW ALLOY BARS ASTM A-588 is a high strength steel offering a minimum yield of 50KSI for bars up to 4" thick.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.