Tel: +86-371-86151827

aisi 1045 carbon steel flat bar 1045 c45 carbon steel plate

Steel grade:aisi 1045 carbon steel flat bar 1045 c45 carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aisi 1045 carbon steel flat bar 1045 c45 carbon steel plate Introduction

C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C - Otai ...

Supply Range of Steel C45 Round Bar. C45 Steel Round Bar: diameter 8mm – 3000mm. C45 Steel …

C45/1045 Steel Round Bars, C45 Steel Rods, Flat Bars, Plates

steelbars.in› Carbon SteelProduct Description Leading Manufacturers, Suppliers of C45 Round Bars, 1045 Steel Bars , S45C Steel Bars – EN 1.0503, UNS G10450. SAE-AISI 1045 is an alloy of iron, further classified as a carbon steel. 1045 is the SAE-AISI designation for this -material. 1.0503 is the EN numeric designation.

S45C Cold Drawn Bar| C45| 1045 Steel: Carbon Steel Supplier

AISI 1045 Steel CK45 Steel 760 Steel *Different country have different code for this carbon steel. Properties of S45C Carbon Steel 1045 Carbon Steel / 760 Carbon Steel / CK45 Steel is a medium tensile low hardenability carbon steel generally supplied in the cold drawn or turned and polished condition, with a typical tensile strength range 600 ...

SAE-AISI 1045 (S45C, G10450) Carbon Steel :: MakeItFrom

SAE-AISI 1045 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1045 is the designation in both the SAE and AISI systems for this material. G10450 is the UNS number. It can have a moderately high tensile strength among the wrought carbon …

AISI 1045 Medium Carbon Flat Steel Bar - Special steel ...

Form of Supply. AISI 1045 Carbon steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. AISI 1045 steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces. 1045 carbon steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes.

AISI 1045 Carbon Steel - AISI 1045 Medium Carbon Steel ...

General characteristics of Carbon Steel 1045. C1045 is a medium carbon, medium tensile steel supplied as forged or normalized. This steel shows reasonable strength and toughness. C1045 will through harden to 2.5” (63mm) with a tensile strength of 66-120 Ksi (620-850 MPa)

Carbon Steel AISI 1045 Round Bar, AISI 1045 Carbon Steel ...

AISI 1045 Carbon Steel Round Bars, AISI 1045 Bars, Carbon Steel AISI G10450 Bar, AISI 1045 Carbon Steel Bars, Carbon Steel AISI 1045 Bright Bar, AISI/SAE 1045 Round Bar, Carbon Steel AISI 1045 Rods Suppliers and Dealer in Mumbai, India.

1045 | CARBON | In Stock | Castle Metals Site

Carbon 1045 in bar SPECIFICATIONS: GRADE CARBON 1045, AISI 1045, UNS G10450 Castle Metals distributes a wide range of Alloy 1045 in rounds, squares, and hexs from our distribution centers in the U.S., Canada, Mexico, Shanghai, Singapore, France, and the U.K. When customers confer with us on 1045, sometimes they say they are stressed by supporting growth.

SAE-AISI 1045 (S45C, G10450) Carbon Steel :: …

SAE-AISI 1045 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1045 is the designation in both the SAE and AISI systems for this material. G10450 is the UNS number. It can have a moderately high tensile strength among the wrought carbon …

Carbon Steel AISI 1045 / C45 Round Bars, AISI SAE 1045 ...

Kalikund Steel is the leading manufacturers, Supplier and exporters of high quality Carbon Steel AISI / SAE 1045 / C45 Round Bars, AISI / SAE 1045 / C45 Bars, Steel AISI / SAE 1045 / C45 Bars, CS AISI / SAE 1045 / C45 Round Bar, Carbon Steel AISI / SAE 1018 Round Bar Stock, AISI / SAE 1045 / C45 Rods Size from 100mm-1200mm in diameter Supplier in India.

1045 | CARBON | In Stock | Castle Metals Site

Carbon 1045 in bar SPECIFICATIONS: GRADE CARBON 1045, AISI 1045, UNS G10450 Castle Metals distributes a wide range of Alloy 1045 in rounds, squares, and hexs from our distribution centers in the U.S., Canada, Mexico, Shanghai, Singapore, France, and the U.K. When customers confer with us on 1045, sometimes they say they are stressed by supporting growth.

1.1191 carbon steel | AISI 1045 | JIS S45C | GB 45 - OTAI ...

ASTM 1045 Carbon steel round bar and flat sections can be cut to your required sizes. AISI 1045 Carbon steel ground bar can also be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. SAE 1045 Carbon steel is also available as Ground Flat Stock / Gauge Plate, in standard and nonstandard sizes.

AISI/SAE 1045/C45 Round Bars - Dhanlaxmi Steel

1045 AISI Carbon Steel Forged Bars Manufacturer, C45 AISI Carbon Steel Round Bars, C45 Bright Bars stockist, Exporter. As an acclaimed enterprise of the industry, Dhanlaxmi Steel is involved in offering a vast array of AISI / SAE 1045 / C45 Round Bars as a manufacturer, exporter, stockiest and supplier to our domestic and global clients.

Carbon Steel AISI 1045 Round Bar, AISI 1045 Carbon Steel ...

AISI 1045 Carbon Steel Round Bars, AISI 1045 Bars, Carbon Steel AISI G10450 Bar, AISI 1045 Carbon Steel Bars, Carbon Steel AISI 1045 Bright Bar, AISI/SAE 1045 Round Bar, Carbon Steel AISI 1045 Rods Suppliers and Dealer in Mumbai, India.

Aisi 1045 Carbon Steel Rod, Aisi 1045 Flat Bar, 1045 Hex Bar

WHAT IS AISI 1045 CARBON STEEL BAR? Piyush Steel is the number one AISI/SAE 1045/C45 Flat Bars Stockholder in India, with the help of latest machinery & group of experts made Us Greatest 1045 AISI Carbon Steel Forged Bars Stockist in India. AS in the year 2001 we become 7th trustable Distributor of AISI / SAE 1045 Flat Bars in India. We are expanding our product all over the world …

AISI 1045 Bars, AISI 1045 Carbon Steel Round Bars …

Leoscor Alloys is one of the Renowned manufacturers & exporter of Carbon Steel 1045 Bars, AISI 1045 Carbon Steel Round Bars Supplier, UNS G10450 Bright Bars, AISI 1045 Bars exporter, Carbon Steel WNR 1.1191 Bars Exporter in India.

1045 medium tensile carbon steel in AISI Standard

AISI 1020: AISI 1020 is a low carbon steel which shares features like easy machinability and high weldability with AISI 1045 steel. However it has lower carbon content which makes it less harder and it doesn’t support hardening processes either unlike AISI 1045. AISI 1006: AISI 1006 are mild steels which have low hardness and are used in ...

1045 Medium Tensile Carbon Steel Bar | Interlloy ...

1045 is a medium tensile low hardenability carbon steel generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 - 700 Mpa and Brinell hardness range 170 - 210 in either condition.Characterised by fairly good strength and impact properties, plus good machinability and reasonable weldability in the hot rolled or normalised ...

Aisi 1045 Steel Plate - Buy 1045 Steel Flat Bar,C45 Steel ...

Carbon steel plate C45/1045 is a medium carbon steel grade offering reasonable tensile strength. Supplied in the cold drawn or hot rolled condition, tensile properties can vary but are approximately between 500-800 N/mm². This grade can be flame or induction hardened to produce a good surface hardness with moderate wear resistance.

AISI 1045 Carbon Steel Round Bars |AISI 1045 Bar, C45 ...

AISI 1045 Carbon Steel Round Bars available from stock, specialise in supplying AISI 1045 Bar, AISI 1045 Rod , AISI 1045 Hex Bar,AISI 1045 Flat, C45 Round Bar

C45 Carbon Steel - West Yorkshire Steel

West Yorkshire Steel are steel stockholders and suppliers of C45 carbon steel round, square and flat bar. Bars can be sawn to your required length in 1 off or multiple cut pieces. West Yorkshire Steel supply flame cut steel profiles in grade C45, which can be surface ground if required.

1018 vs. 1045 Steel Comparison | Capital Steel & Wire

1018 vs. 1045 Steel Comparison Carbon steel is one of the most widely used materials in the world, and the 1018 and 1045 grades of steel is a big reason for that. One of the most common questions that arise when considering buying cold finished steel products is the difference between 1018 cold steel bars and 1045 cold bars.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.