Tel: +86-371-86151827

sa656 gr 70 steel plate chemical composition

Steel grade:sa656 gr 70 steel plate chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sa656 gr 70 steel plate chemical composition Introduction

SA656 Gr 70 steel plate Chemical composition - pressure ...

SA656 Gr 70 steel plate Chemical composition, steel,Hot sell SA656 Gr 70 steel plate Chemical composition, pressure vessel steel plate grades stock in China,China SA656 Gr 70 steel plate Chemical composition, pressure vessel steel plate grades factory.

ASME SA656 Grade 50 steel Chemical composition

s355 jr equivalent to astm a 516 grade 70 steel plate for . Offer ASME SA656 Grade 70 mild steel sheet stock Carbon choice for pressure vessels and boiler fabrication.BEBON STEEL offers ASTM A516 Grade 65 steel price and ASTM A516 Grade 65 steel Chemical Composition.

ASME SA656/SA656M steel coil - Grade 50,Grade 60,Grade …

Sell and export ASME SA656/SA656M steel coil - Grade 50,Grade 60,Grade 70 and Grade 80 with chemical and mechanical properties. Contact us for width, length, thickness and solutions.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

ASTM A516 Grade 70 / ASME SA516 Grade 70 - Chemical Composition The chemical composition of ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate are listed in table 2. Table 2.

【ASTM A656 Steel Plate】Grade 50, 60, 70, 80 | A656 ...

Chemtech is specialized in supplying ASTM steel plate in A656 Grade 80 .For more information of A656 Grade 80 steel plates, please check them in following: Chemical composition % of the Product analysis of grade A656 Grade 60

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 steel plate, also known as PVQ516 steel plate, is carbon steel with specifications for pressure vessel plates and moderate or lower temperature service. A516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important.

ASTM A656 Steel Plate - Grade 50, 60, 70, 80 | Leeco Steel ...

leecosteel› Steel Plate ProductsA656 plate steel is used in construction equipment, crane booms, truck frames and general fabrication. It is suitable at ambient and low temperatures. Please call Leeco Steel at 1-888-828-7897 to be connected to a member of our sales team who can share more information about A656 Grade 60 and 70 plate steel.

ASTM A573/ A573M Grade 70 Structural Carbon Steel Plate

ASTM A573/ A573M Grade 70 Structural Carbon Steel Plate TJC Steel can supply A573 Grade 70/ A573 Gr70 Structural Carbon Steel Plate, mainly used in construction in the fields requiring improved toughness plates.

A656 Structural, Carbon & HSLA Steel Plate - BBN Steel

Structural, Carbon & HSLA Steel Plate. ... Applications include: truck frames, crane booms, and rail car components. Made to Grades 50, 60, 70 and 80— the grade designating the yield strength. BBN Steel stocks in Grade 80 up to 3/4’ , Grade 70 over 3/4” to 1” and Grade 60 over 1” to 1-1/2”.

Asme sa516 grade 70|sa516 grade 60 steel plate specification

Asme sa516 grade 70|sa516 grade 60 steel plate specification. ASTM/ASME SA516 Carbon Steel Plate for Pressure Vessels: ASTM/ASME SA516 specification covers carbon steel plates produced mainly for application in welded pressure vessels where improved notch toughness is important. Tensile strength range is from 55 - 90 MPa and its versatility makes this specifications very popular in application.

ASTM A656 Grade 70,A656 Gr.70,A656Gr70 steel plate__Steel ...

Gangsteel is specialized in supplying ASTM steel plate in A656 Grade 60 .For more information of A656 Grade 50 steel plates, please check them in following:. Chemical composition % of the Product analysis of grade A656 Grade 70

Bethlehem Steel ASTM A656 Grade 70 Type 7, 3/16 to 1 in ...

Type 7, 3/16 to 1 in. thick, steel plate, A high strength, low alloy steel grade with excellent mechanical and fabricating properties. A656 is produced as a killed steel with fine grain practice, it is available in four strength levels. Normal uses

A1018 Grade 80 / A656 HSLA Plate - myalro

A1018 Grade 80 / A656 HSLA Plate Alro stocks A1018 grade 80 / A656 grade 80 high-strength low-alloy (Low carbon steel) (HSLA) plate - a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel. ... These desirable properties are obtained through selected chemical composition and ...

ASME SA516 Grade 70| SA516 Grade 70 Plate| SA516 Grade 70 ...

Prosaic Steel and Alloys have high Quality Inventory of SA516 Grade 70 Plate, SA516 Grade 70 Plate, SA516 Grade 70 Plate, SA516 Grade 70 Plate, SA516 Grade 70 Plate Ex Stock, SA516 Grade 70 Plate, ASME SA516 Grade 70, ASME 516 Grade 70, SA516 Boiler Plate, SA516 Grade 70 Boer Plate, Boiler Quality Steel plate, BQ Plate, Pressure Vessel Plate, SA516 Steel Plate, SA516 Grade 70 Steel Plate.

ASTM A515 Grade 70 Carbon Steel Plates ... - ganpatind

Stockist and Supplier of ASTM A515 Grade 70 Carbon Steel Sheets, ASTM A515 Gr 70 Circle, ASTM A515 Grade 70 Shim Sheet, Huge stock of standard ASTM A515 Grade 70 Polished Plate is in ready stock Call Us Today! +91 22 67437134 | [email protected]

ASTM A516 Grade 70 / ASME SA516 Grade 70 -Chemical ...

ASTM A516 Grade 70 / ASME SA516 Grade 70 - Chemical Composition The chemical composition of ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate are listed in table 2. Table 2. Typical Chemical Composition of ASTM A516 Grade 70 / ASME SA516 Grade 70 Composition Percentage % Composition ...

ASTM A573/ A573M Grade 70 Structural Carbon Steel Plate

ASTM A573/ A573M Grade 70 Structural Carbon Steel Plate TJC Steel can supply A573 Grade 70/ A573 Gr70 Structural Carbon Steel Plate, mainly used in construction in the fields requiring improved toughness plates.

Asme sa516 grade 70|sa516 grade 60 steel plate specification

Asme sa516 grade 70|sa516 grade 60 steel plate specification. ASTM/ASME SA516 Carbon Steel Plate for Pressure Vessels: ASTM/ASME SA516 specification covers carbon steel plates produced mainly for application in welded pressure vessels where improved notch toughness is important. Tensile strength range is from 55 - 90 MPa and its versatility makes this specifications very popular in application.

SA516Gr70|ASME SA516 Grade 70|SA516 Gr.70 STEEL PLATE ...

Length: 3000mm to 15000mm. Gangsteel is specialized in supplying ASME SA516 steel plate in SA516 grade 70. For more information of SA516 grade 70 steel plates, please check them in following: SA516 Grade 70 Chemical Composition.

ASTM A516 Grade 55|Grade 60|Grade 70 Pressure Vessel Steel …

Steel Grade: Grade 60, Grade 65, Grade 70 Product Scope: ANSON produces ASTM A516 steel plate of all grades with good performance; application fields of oil, gas and petrochemical industry, and in sour service and wet H2S applications are all covered.

sa516 Gr 70 | hic steel plate|SA 516 Gr.70 Nace Plate|SA ...

Triton Alloys Inc. is a sa516 Gr 70 steel plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies sa516 Gr 70 steel plate to internationally approved quality standards for applications. sa516 Gr 70 steel plate have excellent quality to …

Bethlehem Steel ASTM A656 Grade 70 Type 7, 3/16 to 1 in ...

Type 7, 3/16 to 1 in. thick, steel plate, A high strength, low alloy steel grade with excellent mechanical and fabricating properties. A656 is produced as a killed steel with fine grain practice, it is available in four strength levels. Normal uses[PDF]

Steel Plate & Sheet - Alro Steel

100XF Temper Leveled Plate 100XF steel plate has been developed for applications where increased strength-to-weight ratios are required. It has physical properties similar to those of ASTM A514 even though its manufacturing process does not require heat treatment. 100XF is available as temper leveled, cut-to-length plate.

SA515Gr70|SA515 Grade 70|SA515 Gr.70,SA515GR.70 PLATE ...

Gangsteel is specialized in supplying ASME SA515 steel plate in SA515 grade 70. For more information of SA515 grade 70 steel plates, please check them in following: SA515 grade 70 Chemical Composition

ASME SA516 / ASTM A516 - Gr. 70 - Brown McFarlane

About ASME SA516 Grade 70 and ASTM A516 Grade 70 We hold large stocks of plates certified to ASTM A516 Gr. 70 and ASME SA516 Gr. 70 in our warehouse facilities in the U.K. A range of specially manufactured hydrogen induced crack resistant steel in SA / A516 Gr. 70 …

ASME SA516 Grade 70|SA516 Grade 60 Steel Plate Specification

For higher grade like sa516 gr-70 steel plate, preheating might be needed for metal arc welding process, especialy with thick steel plate. Test&Inspection for ASME A516 Steel Plate. Delivery State: SA516-70n reffers to normalized steel plate product, for steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil ...

Plate - McNeilus Steel, Inc.

ASTM A572 is a high strength low alloy steel that offers a higher strength than plain carbon steel plates – plus ductility, weldability, formability, toughness and fatigue strength. A572 meets a minimum strength requirement (dependent on grade) and provides good workability and weldability at a moderate price.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.